Irish Setter Marshall 11 Inch Steel Toe Pull-On Work Boot
EDITORIAL REVIEW β Irish Setter Marshall 11 Inch Steel Toe Pull-On Work Boot Assessed on the standards the product is actually certified to and on how the format fits a working shift, by Steven Eaton, WC Safety edito...
Check Price on Amazonπ Amazon Associate Β· You pay the same price Β· We earn a small commission
Assessed on the standards the product is actually certified to and on how the format fits a working shift, by Steven Eaton, WC Safety editor.
Irish Setter Marshall 11 Inch Steel Toe Pull-On Work Boot
A safety toe is impact and compression protection, not electrical isolation. ASTM F2413 treats them as separate ratings: only a boot carrying the EH mark is tested for secondary protection against open electrical circuits, and that protection is voided by wet soles, worn outsoles or embedded metal. Work on or near energised parts is controlled by a zero-energy state and the NFPA 70E arc-flash program first; footwear is the last layer, never the plan.
The Irish Setter Marshall is an 11-inch waterproof pull-on wellington with an ASTM F2413 steel toe and an electrical-hazard (EH) rating, built by the Irish Setter line for ranch hands, oilfield crews, and pole-barn work where laces are a liability. If you are done kicking mud out of eyelets and re-tying frozen laces at 6 a.m., this is the boot to order. It slides on, seals out water, and protects your toes to the same impact/compression standard as any lace-up on our safety footwear wall.
The Marshall lands at and pairs naturally with a pair of work socks and a set of work boot insoles if you spend long days on hard ground. It is a leather boot, so plan on boot care and waterproofing to keep the waterproofing alive.
The Irish Setter Marshall is a waterproof pull-on steel toe wellington in Irish Setter's work line, rated ASTM F2413 for impact and compression and carrying an EH rating for secondary protection against open circuits.
Why order the Marshall
- True pull-on, no laces: dual pull tabs and an 11-inch shaft mean on-and-off in seconds β the reason ranch and oilfield crews pick it over a lace-up like the Timberland PRO Pit Boss.
- ASTM F2413 steel toe: full impact/compression protection; if you want the trade-offs, read steel toe vs composite toe boots.
- Waterproof full-grain leather: seam-sealed against creek crossings, wet corrals, and washdown.
- EH rated: secondary shock protection against open circuits on dry footing β see the electrical hazard boots category for the full rated set.
- 11-inch shaft: keeps debris, snow, and splash out on the tallest-cut boot in our steel toe boots range.
- Laces-free on/off for gloved hands and cold mornings
- Tall 11-inch waterproof shaft
- Steel toe + EH in one boot
- Broken-in western fit familiar to boot wearers
- Pull-on fit runs snug at the instep β size notes below
- Heavier than a 6-inch lace-up
- Leather needs periodic re-waterproofing
Specifications
| Attribute | Detail |
|---|---|
| Safety toe | Steel, ASTM F2413 I/75 C/75 |
| Electrical hazard | EH rated (ASTM F2413) |
| Waterproof | Yes, seam-sealed leather |
| Height | 11 inch pull-on wellington |
| Closure | Pull-on (no laces) |
| Sizes | 8 to 13 (see picker for stocked sizes) |
Who should buy the Marshall
Order this if your day is spent on a ranch, in an oilfield yard, or around a pole barn where laces catch, freeze, or clog with mud. If you are unsure whether your role requires a rated safety toe, our guide on when you need safety toe boots covers the OSHA and ASTM basics. The pull-on wellington cut is also the standard answer for anyone who wants dependable waterproof work boots without stooping to tie boots. It is not the right pick for climbing β if you work poles or steep terrain, a raised logger heel like the Irish Setter Mesabi logger tracks better. For flat concrete all day, a wedge romeo such as the Wolverine Trade Wedge romeo is lighter.
Sizing and fit
Because there are no laces to cinch, pull-on fit is driven by your instep and calf. Most wearers order their normal Irish Setter size; if you have a high instep or wide foot, size up a half and add a cushioned insole from our work boot insoles range to take up volume. The 11-inch shaft clears most jeans; tuck for wet work. Pair with moisture-wicking work socks to manage the taller boot's heat.
Marshall vs the pull-on and steel-toe field
| Boot | Height / style | Toe | Best for |
|---|---|---|---|
| Irish Setter Marshall | 11 inch pull-on | Steel | Ranch / oilfield, laces-free |
| Wolverine Trade Wedge Romeo | Low wedge romeo | Steel | Flat concrete, quick on/off |
| Ariat Groundbreaker Chelsea | Chelsea pull-on | Steel (wide square) | Roomy toe box, ranch-to-jobsite |
Choose the Marshall over the Wolverine Trade Wedge romeo when you want a tall waterproof shaft instead of a low wedge; choose it over the Ariat Groundbreaker chelsea when you want a taller wellington rather than an ankle chelsea. All three are covered in our best pull-on work boots guide. Check current price on Amazon
More from our Safety Footwear reviews
What separates the models in this category is set out in best boot care products, best composite toe work boots, best electrical hazard work boots.
Directly comparable options are grouped in ariat work boots, carhartt work boots, composite toe boots.
Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.