FallTech G727630 Self-Retracting Lifeline, 30 ft Galvanized Cable

CHECK PRICE ON AMAZON →SHOP SELF-RETRACTING LIFELINES →

As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.

FallTech G727630 Self-Retracting Lifeline, 30 ft Galvanized Cable Overview

What This Self-Retracting Lifeline Is Built For

Fall protection is life-safety equipment. A personal fall arrest system must limit free fall and arrest forces under OSHA 1926.502 / 1910.140 and ANSI Z359: use a full-body harness (never a body belt for fall arrest) with a compatible self-retracting lifeline or shock-absorbing lanyard and an anchorage rated 5,000 lb per worker (or engineered to a 2:1 safety factor). Match the SRL to the anchorage location and edge exposure — this device is built for overhead anchorage, so anchor overhead and keep the cable off sharp edges; inspect every component before each use, immediately retire anything that has arrested a fall or shows damage, and work to a documented rescue plan. Browse fall protection and self-retracting lifelines.

Pros & Cons

How It Compares

Specifications

Related Guides

best self-retracting lifelines, fall protection equipment guide, best safety harness, best fall protection kits, best fall protection lanyards.

Related Resources

fall protection self retracting lifelines full body harnesses anchor points

Frequently Asked Questions

What length and cable does the FallTech G727630 use?

It is a 30 ft self-retracting lifeline on 3/16-inch galvanized steel cable. Galvanized cable resists abrasion and outdoor exposure, which suits a 30 ft overhead working length. Other FallTech cable lengths are separate part numbers.

What connectors come on the G727630?

A load-indicating swivel snap hook on the lifeline end plus a connecting anchorage carabiner, rated 5,000 lb minimum tensile strength with a 3,600 lb gate. The swivel limits cable twist and the load indicator flags a unit that has arrested a fall. Confirm the connectors fit your anchor and harness hardware before ordering.

What is the housing made of?

A glass-filled nylon housing for impact resistance, over a rugged internal steel drum and inertial braking system, with a recoil spring bumper to help reduce retraction lock-up. This is a general-purpose overhead SRL build; it is not the aluminum-housing edge-rated model.

What ANSI standard does the G727630 meet?

Its published listing cites ANSI Z359.1-2007 and ANSI A10.32. The current SRL standard is ANSI Z359.14, which uses Class 1 and Class 2 designations; because the listing predates that revision we do not publish a class we cannot verify. Confirm the current certification and class on FallTech's datasheet.

What weight capacity does it support?

The rated capacity is not stated in the product title, so we do not publish a figure we cannot verify. Check FallTech's datasheet for the capacity range and confirm the combined worker-plus-tools weight falls within it before use.

Does the G727630 include a harness?

No. It is the self-retracting lifeline only. OSHA requires a complete personal fall-arrest system, so you also need a compliant full body harness and a rated anchorage. The SRL links the harness dorsal D-ring back to the overhead anchor point.

Can I use the G727630 over a leading edge or at foot level?

No. It is built for overhead anchorage, not for sharp-edge or foot-level work. Running a standard cable SRL over an edge can cut the lifeline during a fall. For edge or foot-level anchorage, use an edge-rated (Class 2) SRL instead. Browse our self-retracting lifelines for edge-rated options.

Is a body belt allowed with this SRL?

No. OSHA 1926.502 and 1910.140 require a full body harness for fall arrest; body belts are prohibited for arresting a fall. Connect the SRL to the dorsal D-ring of a full body harness. See our fall protection range to complete the system.

What kind of anchorage does it need?

Per OSHA, the anchorage for a personal fall-arrest system must support the loads required by the standard, commonly cited as 5,000 lb per attached worker unless engineered by a qualified person to a 2:1 safety factor. Anchor overhead per FallTech's instructions and never tie off to an unrated point.

Can this SRL be reused after it arrests a fall?

No. OSHA and ANSI Z359 require that any fall-arrest component subjected to impact loading be removed from service immediately. The load-indicating snap hook flags a deployed unit. Retire and replace the SRL after any fall event, and follow FallTech's inspection intervals for normal use.

Is galvanized cable better than synthetic web for this length?

For a 30 ft overhead working length in abrasive or outdoor conditions, galvanized cable resists cuts and wear better than web. Web SRLs are lighter and common at shorter lengths. Match the lifeline to your environment; compare options in our self-retracting lifelines collection.

How is the G727630 different from FallTech's Contractor cable SRLs?

They share the same 30 ft galvanized-cable, glass-filled-nylon overhead-SRL layout and the same connector strengths. Model and part numbers differ, and certification revisions can vary by build date, so match the exact part number and confirm the current ANSI class on FallTech's datasheet rather than assuming they are identical.

How should I inspect the G727630 before use?

Before each use, check the cable for kinks, broken wires, or corrosion; verify the cable pays out and retracts smoothly and that the brake locks when pulled sharply; inspect the swivel snap hook, carabiner, and load indicator; and check the nylon housing for cracks. Remove it from service if any component fails inspection and follow FallTech's guidance.