DEWALT Reinforcer RX Bifocal Safety Glasses — ANSI Z87.1+ Reader Wraparound
$13.99
Final price set by Amazon · may vary
Diopter: +1.5 Diopter
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the DEWALT Reinforcer RX, the bifocal-reader wraparound that ends the readers-vs-safety-glasses swap. Editorial assessment by Steven Eaton, WC Safety editor, based on pu...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the DEWALT Reinforcer RX, the bifocal-reader wraparound that ends the readers-vs-safety-glasses swap.
Editorial assessment by Steven Eaton, WC Safety editor, based on published DEWALT specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published DEWALT specifications and category fit. We did not laboratory-test this product.
The DEWALT Reinforcer RX integrates a reading-magnification segment into a full ANSI Z87.1+ wraparound safety glass, so close-up workers get impact protection and near-vision help without switching between safety glasses and readers. The bifocal sits in the lower inner portion of the lens without obstructing the main safety coverage, and it comes in +1.5, +2.0, and +2.5 diopter strengths for the most common reading needs.
CHECK PRICE ON AMAZON → SHOP DEWALT SAFETY GLASSES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the DEWALT Reinforcer RX ends the reader swap
Workers who need readers face a bad habit on the job: pull off the safety glasses, put on the readers to check a gauge or label, and spend those seconds with no eye protection. The Reinforcer RX removes the swap entirely — a magnified bifocal segment built into the lower lens of a full Z87.1+ wraparound, so close reading and impact protection live in one frame. Glance down to read, look up to work. Our full DEWALT Reinforcer RX review rates it 4.5/5, and the safety glasses buyer's guide covers when a bifocal frame fits.
Safety first: the Reinforcer RX is impact-and-debris protection, not a sealed goggle — it is not rated against a chemical splash hazard, fine airborne dust, or vapor, which require sealed goggles or a face shield per your hazard assessment. The bifocal is a reading-magnification segment, not a full prescription — pick the diopter that matches your reading need, and don't rely on it for distance correction. Choose eyewear against measured hazards with the when-do-you-need-safety-glasses guide.
What the listing documents
From the published specs: a full ANSI Z87.1+ wraparound polycarbonate safety glass with an integrated bifocal reading segment in the lower inner lens; three diopter strengths — +1.5, +2.0, and +2.5; rubber temple tips and nosepiece; base model DPG59-215C. As dewalt safety glasses go, the Reinforcer RX is the reader member — a genuine bifocal safety glasses build and a true reader safety glasses that keeps the Z87.1+ rating.
Choosing your Reinforcer RX diopter
Pick the magnification, not a tint: +1.5 for mild close-up help, +2.0 for moderate, and +2.5 for stronger reading — match the diopter to your usual drugstore-reader strength. The broader reader category is covered in the safety reading glasses collection, and for a plain clear safety lens without magnification, see the clear-lens collection. For humid work, add fog control from the anti-fog collection and anti-fog guide.
Where the Reinforcer RX sits in the DEWALT line
The Reinforcer RX is DEWALT's reader-integrated frame; for standard vision the Contractor Pro carries the widest tints, the Radius is the compact entry frame, and the Supervisor is the premium full-frame. Browse the full DEWALT safety glasses collection, and the best safety glasses 2026 roundup places the line against other brands.
Where it fits by job and crew orders
The bifocal suits inspection, assembly, maintenance, and any close-up detail work — the manufacturing, mechanics, and construction guides rank frames by task, and smaller-faced wearers should check the small-face guide and women's fit guide. Where the hazard exceeds impact — splash, dust, vapor — step to a sealed goggle from the safety goggles collection or the broader eye protection collection. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Reading the Z87 marking, and what it does not cover
Protective eyewear in the US is built to ANSI/ISEA Z87.1, and OSHA 1910.133 requires eye protection that meets it. The marking on the frame is the specification, and the important distinction is a single character: Z87 is basic impact, Z87+ is high impact — tested with a quarter-inch steel ball at 150 ft/s for spectacles. If the work throws anything, Z87+ is the line.
The suffixes narrow it further: D3 is splash and droplet, D4 dust, D5 fine dust. These matter because a spectacle cannot earn D3 — droplet protection needs a sealed goggle. Safety glasses are impact protection, not chemical splash protection, however wraparound the lens looks, and substituting one for the other is a common and consequential error.
A face shield is also secondary protection under 1910.133: it is worn over primary eye protection, never instead of it. And tint is not shade — a dark lens without a stated IR/UV shade number offers no rated protection against radiant energy.
Frequently asked questions
What is the DEWALT Reinforcer RX-Bifocal?
A full ANSI Z87.1+ wraparound safety glass with an integrated reading-magnification (bifocal) segment in the lower lens, so you get impact protection and near-vision help without switching between safety glasses and readers. It comes in +1.5, +2.0, and +2.5 diopter strengths.
How does the bifocal segment work?
A magnified reading section sits in the lower inner portion of the lens, so you glance down to read gauges, labels, and fine print at close range, then look up through the clear main lens for normal work - all while keeping the Z87.1+ safety rating.
Which diopter strength should I choose?
Match it to your reading needs: +1.5 for mild magnification, +2.0 for moderate, and +2.5 for stronger close-up help. If you already use drugstore readers, pick the diopter closest to that strength.
Is it a substitute for prescription safety glasses?
No - the bifocal is a reading-magnification segment, not a full custom prescription. It handles near-vision reading needs; for a full distance or astigmatism correction, prescription safety eyewear is the right route.
Is it ANSI Z87.1+ rated?
Yes - it is a full ANSI Z87.1+ wraparound, so it meets the high-impact requirement for most construction and industrial eye hazards while adding the reader segment.
Does the bifocal segment block my main view?
No - it occupies only the lower inner portion of the lens, leaving the main safety coverage area clear. You look through the clear upper lens for general work and drop your eyes to the segment only for close reading.
Who is the Reinforcer RX for?
Workers who need reading glasses on the job - inspectors reading gauges, technicians checking labels, anyone doing close-up detail - and don't want to remove safety glasses (and lose protection) to read. It combines both into one frame.
Is it over-the-glasses (OTG)?
No - the Reinforcer RX is not an OTG frame. It replaces readers with a built-in bifocal rather than fitting over your own glasses; for wearing over existing frames, choose an OTG model.
Is it enough, or do I need goggles?
The Reinforcer RX protects against impact and debris from the front and sides. It does not seal against a chemical splash hazard, fine dust, or vapor - those need sealed goggles or a face shield. Match the eyewear to your hazard assessment.
What tint does it come in?
The Reinforcer RX-Bifocal is offered by diopter strength (+1.5, +2.0, +2.5) on a clear lens suited to indoor and general work. For outdoor tinted reading needs, a separate tinted reader or safety reading glass is the better route.
How do I care for the lenses?
Rinse grit before wiping and use a microfiber or lens-safe cloth; take care around the bifocal segment. Retire a lens once scratches enter your line of sight - a scratched safety or reading segment no longer performs fully.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
DEWALT
Model / SKU
DPG59-215C
Product Type
Safety Glasses
Price
$9.18 (Amazon)
Rating
4.5 / 5 — 4736 Amazon ratings
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.5 / 5· 4,736 ratings on Amazon
★★★★★
Love These Glasses
I bought a clear pair and shaded to wear as sun glasses. The sun glasses are as good as the clear lens. My review of the clear lens Dewalt safety glasses is below.I'm 46 and wear reading glasses. It's gotten to the point I have to put on my reading glasses to see the tape measure, see to cut the line with a saw, etc - until now. These things are awesome! They have built in bifocals. Look down through the bifocal, you can see up close. Look up or straight ahead and you see through the regular safety glass. The bifocal part of the glasses is slightly oversized - for example, big enough so you can see the saw blade and the line you're cutting, not say just one tiny spot. The quality of the lenses seems good too. Objects are clear and sharp. They are stylish enough for a variety of uses and inexpensive enough to be disposable or easily replaceable - light and comfortable too. They even come with a protective sleeve to protect the lenses. Just remember... this is a review for $11.00 safety glasses, not $300.00 prescription glasses. Whoever came up with this idea is a genius. I just ordered a second pair with the smoked lenses for working outside (or reading a book on the beach, or sunglasses that let me see to tie a fly when fly fishing, you get the idea). Highly recommended!
Verified Purchaser · May 22, 20 · ✓ Amazon Verified Purchase
★★★★★
Sunglasses with bifocals
My husband uses these every day . He is able to avoid carrying sunglasses and reading glasses .
Verified Purchaser · March 23, · ✓ Amazon Verified Purchase
★★★★☆
Excellent, BUT be aware of the very large size.
This is an excellent product, especially at this price. Contrary to a few other reviewers, I find these glasses to be fairly well-made and relatively sturdy. It's true that the temples and nosepieces are quite bendable, and they very possibly could break if used by someone who's in the habit of quickly tearing them off of their head with one hand. Since I've always worn glasses, I do tend to be fairly careful with frames. I often observe many people who aren't, and for these types of users, I can see these glasses needing to be replaced in time. But, after all, these are not meant to compare to a heavy-duty pair of frames that one would find at an optical shop. The optics are decent, and the dark smoke tint is good for reading at the pool or beach. I also very much like the neoprene sleeve. Very large sunglasses, such as these, often don't fit in standard cases, but this sleeve prevents lens scratching, and provides some protection for the frame itself. Hardly worth mentioning is the tiny and flimsy plastic clip that comes attached to the sleeve. I really can't imagine it being useful, but for me, it's a non-issue.The only thing preventing me from giving these a five-star rating, is the fact that the extremely large size, which isn't observable in the product photos or description, makes them odd-looking, and somewhat bug-eyed on most faces. Now, I do know the reason for this; the size and shape make these excellent for safety and protection in a shop atmosphere. Luckily, I did read other reviews which mentioned the size issue, so I was prepared. If one plans to us them for their intended purpose, i.e. for safety, then give them five stars.
Verified Purchaser · July 9, 20 · ✓ Amazon Verified Purchase
★★★★★
Good, affordable eye protection.
Good fit, good protection of my eyes, very affordable. The optics (diopters) seems to be a bit wimpy, but not bad - it IS, after all, plastic - but they're comfortable to wear and look pretty good, even though I'm just doing yard work and no one sees them. We only get one set of eyes.
Verified Purchaser · May 4, 202 · ✓ Amazon Verified Purchase
★★★★★
These safety glasses are one of the best deals going
Cut to the Chase: These safety glasses are one of the best deals going. I highly recommend them.Background: I had cataract surgery done and as part of that had my vision corrected. I had been extremely near sighted and had worn glasses my entire life. My distance vision is now 20/20 but now I need reading glasses. I am also a shooter and firearm instructor.I went looking for a pair of sunglasses that would also double as safety glasses. I really wanted a pair where the main lens was uncorrected for normal vision while the bottom part be magnified for reading. While shooting you could use the bottom part of the lens to obtain a clear “front/rear sight picture” and with a slight tilt of the head use the top part of the lens to obtain a clear view of your target. Now for my review:Dewalt DPG59-220C Reinforcer Rx-Bifocal 2.0 Smoke Lens High Performance Protective Safety Glasses with Rubber Temples and Protective Eyeglass Sleeve.PRO:The glasses are inexpensive (approximately $10) however that is not evident in their construction, styling or performance.The glasses are very light weight, it is like you are not wearing glasses at all. The temple pieces go straight back with a slight downward curve (no issue with the temple pieces being too short to go behind the ear). The temple pieces bend inward slightly so that they “pinch” your head to hold them in place (the pressure is slight, not uncomfortable at all). There is a rubber like insert in the end of each temple piece to add comfort and aid in retention when your skin gets sweaty. There is also a rubber like nose piece that also helps prevent the glasses slipping.The lenses are some kind of plastic (not polycarbonate). The lenses wrap around the sides and the top makes contact with your forehead, both of these features are important in shooting glasses to prevent debris (empty shell cases) making it to your eye. The wrap around design does not have any distortion. The lenses are a dark smoke color and according to the information are UV protected (not polarized) and meet ANSI requirements for safety glasses.The magnified portion is molded in at the bottom of the lens, approximately 0.5” tall and 1.25” wide (about 20% of the total lens height). I initially thought the magnified portion was too small, however when wearing them it is the perfect size. Unnoticeable in regular use however there when you need the magnification.I also have higher priced shooting glasses (Wiley X) that I like a little better, however they are significantly more expensive and also do NOT have the option of being both shooting glasses and reading glasses at the same time.I like these so much that I bought a 2nd pair of the smoke lens (2.5x) and a pair of the clear lens (3.0x). I may buy more and keep a pair in the car, in the shooting bag, in the tool box, etc. At the price, why not.CON:The lenses being some kind of plastic means they are more susceptible to being scratched. The protective eyeglass sleeve provided is cumbersome to use. Since the lenses wrap around, the glasses have a deeper profile that prevent a regular eyeglass case from being used. I have not bothered with a case and just make sure I don’t lay them lens down. At the inexpensive price point it is not a big deal if you have to replace them if they do get scratched.The glasses are a “one-size-fits-most”. For me they fit perfectly, however I imagine that you might be able to heat the temple pieces until they got soft and then gently bend them in/out if they are too tight/loose for your head.I am a big guy / big head and the size of the glasses look fine on me. Smaller framed people may think the glasses look too big for their head.Tip: The name “Dewalt” is printed on each temple piece, I used a black sharpie pen to cover it over. They now just look like a nice pair of sunglasses and not safety glasses.Keep in mind that this review is worth exactly what you paid for it.Update: I have now used them practically every day for a year. I stand by my original review but I do have one nit to pick: The temple pieces have a soft rubber pad that keeps it comfortable while it is “pinching” your head to keep the glasses in place. However, this soft rubber does NOT wrap around the end which is hard plastic. When the temple pieces are folded, the hard end of the temple piece touches the inside of the lens. Over time this causes a vertical wear/scratch on the inside of the lens. I carry theses in my pants pocket and in the course of a day, the frames flex and cause the scratch. If you don’t carry them in a pocket or use the supplied foam sleeve, this should not be as much of an issue. I am going to try modifying the temple ends and see if I can solve the issue. At around $12 I am not that concerned if I have to replace them every year or two.I have also purchased the Jackson Safety Nemesis Safety glasses that I like as well, the temple pieces do NOT touch the inside of the lens However I don’t like the temple ends either, they come back straight to a point which could seriously poke you in the eye if you are not careful putting them on.
Verified Purchaser · May 19, 20 · ✓ Amazon Verified Purchase
★★★★★
Worth having.
These work great. Great price and quality.
Verified Purchaser · January 2, · ✓ Amazon Verified Purchase
★★★☆☆
Glasses Arrived with Scratches
First my main Con (why I only give them 3 stars):This is my second pair. I returned the first pair and asked for a replacement. Actually I ordered clear Bifocals and a pair of smoked bifocals. I returned both pair. The reason? Scratched lenses right out of the packaging. The clear pair of safety glasses in the replacement order also arrived with a scratched lens, the second pair of smoked lenses were not. The scratches seem to be caused by the packaging. I ordered them in the Frustration Free packaging so the standard packaging may not cause similar damage. My guess, based on what I can see is the glasses jiggling loose inside the packaging, plastic lens against plastic container scratches the outside of the lenses where they rub the container. Not good. I decided to keep the clear pair this time. The scratches won't interfere with my vision, they are only on the right lens and slightly right of my right eye's direct field of vision, but still within my peripheral vision, annoying. I'd let Dewalt know about this problem if I knew how. No one whats to pay this kind of money for scratched glasses.Pros:The 1.5 bifocal portion on each lens is clear and works well. Freeing me from having to switch back and forth to my readers when trying to read a tape measure or ruler. Plus the bifocal sections are located low enough that I easily can look over them when I don't need them, which is most of the time. So, I really like this feature.The nose bridge pads are rubber and very comfortable.The clear and the smoked glasses are identical other than the tinting in the smoked lenses for sunny outdoor work. The no magnifying portion of the lenses are not distorted and easy to look through, not counting the scratches.The protective cover sleeve is a thick stretchy fabric that protects the lenses and holds the glasses securely. It has a small plastic clip hook that will fit over a normal width belt loop, say on a pair of jeans.Minor Con:The protective sleeve is very tight I worry I'm going to break my glasses when pulling it over them. I've only done it a few times so far and so far so good. hopefully that will continue.I took several pretty good pictures of the glasses, protective sleeve and Packaging, but it appears Amazon is no longer allowing customer product photos.
Verified Purchaser · April 11, · ✓ Amazon Verified Purchase
★★★★★
Really good
I wear these all the time in the garage or out in the yard. They fit perfectly, not to tight or loose, very comfortable and light weight. They will fog if you're wearing a mask in the cold. The magnifying bifocals are a super extra bonus, you don't really know the bifocals are there until you intentionaly look throught them. They seem sturdy enough to withstand abuse. You have to be careful about loosing the nose pieces, they are secured very well, but add a little silicone adhesive and you won't loose them
Verified Purchaser · February 2 · ✓ Amazon Verified Purchase
★★★☆☆
Great value, need a case.
Hard to get use to, you can see the line where the reader begins. Is low to kine of site making them difficult to get use to. Love the concept, but still pretty out on them. Work just alike any of my other safety glasses as far as glare reduction have not noticed a thing great about them. Material is pretty standard. CARRING CASE is a joke and disappointed there is no protective case for them when not in use. Great Value.
Verified Purchaser · June 18, 2 · ✓ Amazon Verified Purchase
★★★★★
They are awesome !
Seriously, should’ve got these a long time ago they’re absolutely fantastic
Verified Purchaser · April 30, · ✓ Amazon Verified Purchase
Showing 10 of 4,736 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the DEWALT Reinforcer RX-Bifocal?
A full ANSI Z87.1+ wraparound safety glass with an integrated reading-magnification (bifocal) segment in the lower lens, so you get impact protection and near-vision help without switching between safety glasses and readers. It comes in +1.5, +2.0, and +2.5 diopter strengths.
How does the bifocal segment work?
A magnified reading section sits in the lower inner portion of the lens, so you glance down to read gauges, labels, and fine print at close range, then look up through the clear main lens for normal work - all while keeping the Z87.1+ safety rating.
Which diopter strength should I choose?
Match it to your reading needs: +1.5 for mild magnification, +2.0 for moderate, and +2.5 for stronger close-up help. If you already use drugstore readers, pick the diopter closest to that strength.
Is it a substitute for prescription safety glasses?
No - the bifocal is a reading-magnification segment, not a full custom prescription. It handles near-vision reading needs; for a full distance or astigmatism correction, prescription safety eyewear is the right route.
Is it ANSI Z87.1+ rated?
Yes - it is a full ANSI Z87.1+ wraparound, so it meets the high-impact requirement for most construction and industrial eye hazards while adding the reader segment.
Does the bifocal segment block my main view?
No - it occupies only the lower inner portion of the lens, leaving the main safety coverage area clear. You look through the clear upper lens for general work and drop your eyes to the segment only for close reading.
Who is the Reinforcer RX for?
Workers who need reading glasses on the job - inspectors reading gauges, technicians checking labels, anyone doing close-up detail - and don't want to remove safety glasses (and lose protection) to read. It combines both into one frame.
Is it over-the-glasses (OTG)?
No - the Reinforcer RX is not an OTG frame. It replaces readers with a built-in bifocal rather than fitting over your own glasses; for wearing over existing frames, choose an OTG model.
Is it enough, or do I need goggles?
The Reinforcer RX protects against impact and debris from the front and sides. It does not seal against a chemical splash hazard, fine dust, or vapor - those need sealed goggles or a face shield. Match the eyewear to your hazard assessment.
What tint does it come in?
The Reinforcer RX-Bifocal is offered by diopter strength (+1.5, +2.0, +2.5) on a clear lens suited to indoor and general work. For outdoor tinted reading needs, a separate tinted reader or safety reading glass is the better route.
How do I care for the lenses?
Rinse grit before wiping and use a microfiber or lens-safe cloth; take care around the bifocal segment. Retire a lens once scratches enter your line of sight - a scratched safety or reading segment no longer performs fully.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.