DeWalt DPG82 Smoke Concealer Anti-Fog Safety Goggle
$15.75
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the DeWalt DPG82 Smoke Concealer, a sealed anti-fog goggle for bright outdoor work. Editorial assessment by Steven Eaton, WC Safety editor, based on published DeWalt spe...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the DeWalt DPG82 Smoke Concealer, a sealed anti-fog goggle for bright outdoor work.
Editorial assessment by Steven Eaton, WC Safety editor, based on published DeWalt specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published DeWalt specifications and category fit. We did not laboratory-test this product.
The DeWalt DPG82 Smoke Concealer is an ANSI Z87.1-rated dual-mold safety goggle with a smoke anti-fog lens and a sealed wraparound fit, blocking airborne particles, liquid splash, and chemical mist from any angle while cutting glare in bright conditions — and unlike open glasses, it is a sealed goggle for outdoor splash and dust, meeting OSHA 29 CFR 1910.133.
CHECK PRICE ON AMAZON → SHOP SAFETY GOGGLES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the DeWalt DPG82 Smoke seals and shades at once
Outdoor work with a splash or dust hazard asks two things of eye protection: a full seal against liquid and airborne particles, and glare control in the sun. The DPG82 Smoke does both — the same dual-mold sealed goggle as the clear DPG82, with a smoke anti-fog lens that tints down bright light while the sealing surface blocks splash and dust from every angle. It is ANSI Z87.1-rated and meets OSHA 29 CFR 1910.133. As safety goggles go, this is the sealed smoke-lens pick, and the glasses vs goggles guide and the ANSI Z87.1 guide explain when a goggle is required. It seals the eye and cuts the glare.
Safety first: unlike open glasses, the DPG82 is a sealed goggle — the listing states it blocks liquid splash and chemical mist, so it is intended for a chemical splash hazard as well as dust and debris. Confirm the specific D3 splash marking on the listing for your chemical, and where the face also needs coverage add a face shield over the goggle. The smoke lens is for bright light — indoors, use the clear safety glasses or clear goggle instead; match the protection to the hazard with the glasses vs face shields guide. Retire the goggle when the seal or lens is worn.
What the DeWalt DPG82 Smoke listing documents
From the published specs: an ANSI Z87.1-rated safety goggle; a dual-mold sealed wraparound fit around the eye socket; a smoke anti-fog lens for glare control; and compliance with OSHA 29 CFR 1910.133, blocking particles, liquid splash, and chemical mist from any angle. These are true smoke lens safety goggle and sealed safety goggle credentials in an anti-fog safety goggle. Confirm the D3 splash marking and any OTG fit on the listing.
How the DeWalt DPG82 Smoke compares to other eye protection
For the clear-lens version, the DeWalt DPG82 Clear; for an open wraparound glass, the Uvex Genesis; for a foam-lined frame between glasses and goggles, the Uvex Seismic; for a Z87+ and ballistic glass, the Pyramex Venture II; and for face-level splash coverage, the face shields collection. The eye protection buyer's guide covers the range.
Choosing the right eye protection for the hazard
Match the seal and lens to the hazard and light. Browse the eye protection and anti-fog eyewear collections; for the anti-fog trade-off, the anti-fog guide and the anti-fog vs anti-scratch guide; and for the smoke-tint decision, the clear vs smoke guide.
Where it fits by job and crew orders
The DPG82 Smoke suits outdoor construction, chemical-handling, and grounds tasks with splash, mist, or dust exposure in bright light — see the outdoor eyewear guide and the laboratory eyewear guide; for glare, compare the polarized vs non-polarized guide. Confirm the D3 marking and fit on the listing, and retire the goggle when worn. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Frequently asked questions
What is the DeWalt DPG82 Smoke Concealer?
An ANSI Z87.1-rated dual-mold safety goggle with a smoke anti-fog lens and a sealed wraparound fit. It blocks particles, splash, and mist from any angle while cutting glare in bright conditions.
How is the smoke lens different from the clear DPG82?
The smoke lens tints down bright light and glare for outdoor and high-glare work; the clear DPG82-11 is for indoor and low-light. Both are the same sealed dual-mold goggle - choose by the light.
Is it rated for chemical splash?
The listing states the sealed goggle blocks liquid splash and chemical mist from any angle and meets OSHA 29 CFR 1910.133. Confirm the specific D3 splash marking on the product listing for your chemical task.
How is a goggle different from safety glasses?
A goggle seals against the face around the entire eye socket, blocking particles, liquid splash, and mist from every angle; open safety glasses leave gaps at the sides and top.
Is the lens anti-fog?
Yes - this is the smoke anti-fog variant (DPG82-21), which resists fogging in humid or temperature-changing work where a sealed goggle would otherwise fog.
What standard does it meet?
The listing states ANSI Z87.1 rating and compliance with OSHA 29 CFR 1910.133 for eye and face protection in industrial, construction, laboratory, and chemical environments.
Can I use the smoke lens indoors?
A smoke lens is intended for bright and outdoor conditions; indoors or in low light it reduces visibility, so choose the clear DPG82-11 for indoor work.
When should I choose this over safety glasses?
Choose the sealed goggle when the hazard includes liquid splash, chemical mist, or fine airborne dust that open glasses cannot keep out, and you also need glare control outdoors.
Does a sealed goggle fog up?
Sealed goggles trap warm, humid air and are more prone to fogging than open glasses; this is the anti-fog variant, which resists it. In extreme humidity, pair with anti-fog wipes and confirm ventilation on the listing.
Does it fit over prescription glasses?
Confirm the over-the-glasses fit on the product listing; some Concealer configurations accommodate prescription eyewear underneath, but verify for this variant.
How do I care for it?
Clean the lens with lens-safe wipes, keep the sealing surface clean, and retire the goggle when the lens is scratched, the seal degrades, or the frame is cracked, since a damaged goggle no longer seals as rated.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Read our detailed DeWalt DPG82 Smoke Concealer Anti-Fog Safety Goggle review — strengths, limitations, and the alternatives that matter.
Brand / Vendor
DeWalt
Model / SKU
DPG82-21C
Product Type
Safety Goggles
Price
$15.75 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the DeWalt DPG82 Smoke Concealer?
An ANSI Z87.1-rated dual-mold safety goggle with a smoke anti-fog lens and a sealed wraparound fit. It blocks particles, splash, and mist from any angle while cutting glare in bright conditions.
How is the smoke lens different from the clear DPG82?
The smoke lens tints down bright light and glare for outdoor and high-glare work; the clear DPG82-11 is for indoor and low-light. Both are the same sealed dual-mold goggle - choose by the light.
Is it rated for chemical splash?
The listing states the sealed goggle blocks liquid splash and chemical mist from any angle and meets OSHA 29 CFR 1910.133. Confirm the specific D3 splash marking on the product listing for your chemical task.
How is a goggle different from safety glasses?
A goggle seals against the face around the entire eye socket, blocking particles, liquid splash, and mist from every angle; open safety glasses leave gaps at the sides and top.
Is the lens anti-fog?
Yes - this is the smoke anti-fog variant (DPG82-21), which resists fogging in humid or temperature-changing work where a sealed goggle would otherwise fog.
What standard does it meet?
The listing states ANSI Z87.1 rating and compliance with OSHA 29 CFR 1910.133 for eye and face protection in industrial, construction, laboratory, and chemical environments.
Can I use the smoke lens indoors?
A smoke lens is intended for bright and outdoor conditions; indoors or in low light it reduces visibility, so choose the clear DPG82-11 for indoor work.
When should I choose this over safety glasses?
Choose the sealed goggle when the hazard includes liquid splash, chemical mist, or fine airborne dust that open glasses cannot keep out, and you also need glare control outdoors.
Does a sealed goggle fog up?
Sealed goggles trap warm, humid air and are more prone to fogging than open glasses; this is the anti-fog variant, which resists it. In extreme humidity, pair with anti-fog wipes and confirm ventilation on the listing.
Does it fit over prescription glasses?
Confirm the over-the-glasses fit on the product listing; some Concealer configurations accommodate prescription eyewear underneath, but verify for this variant.
How do I care for it?
Clean the lens with lens-safe wipes, keep the sealing surface clean, and retire the goggle when the lens is scratched, the seal degrades, or the frame is cracked, since a damaged goggle no longer seals as rated.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.