DEWALT DPG22V Vented Safety Helmet — Type II Class C, 4-Point Chin Strap

SHOP SAFETY HELMETS →VENTED HARD HATS →

DEWALT DPG22V Vented Safety Helmet Overview

Who It Is For

Match this helmet to the hazard. It is Class C, which means it is vented and gives no electrical protection at all, so it must not be used for work on or near energized conductors; where an electrical hazard exists, use a Class E helmet like the non-vented DPG22 and follow de-energizing and NFPA 70E practices. Just as important, a safety helmet protects your head but does not keep you from falling. Whenever you work at height above the trigger in OSHA 1926.501, head protection has to be paired with a personal fall arrest system — an anchor, a full-body harness, and a connecting device — not used in its place, even though the 4-point strap helps the helmet stay on during a slip. Keep the shell intact, use only DEWALT-approved accessories in the slots, and set the ratchet and chin strap for a level, stable fit. See Type I vs Type II and helmets vs bump caps to match the helmet to your hazard.

Pros & Cons

How It Compares

Specifications

Related Guides

Hard hat classes explained, Type I vs Type II, Class E vs Class G, best safety helmet, helmets vs bump caps.

Related Resources

Safety helmets head protection DEWALT DPG22 non-vented (Class E) Ergodyne 8973 vented Class C 3M SecureFit X5001V vented

Frequently Asked Questions

Does Class C protect against electrical hazards?

No. Class C means conductive: the helmet offers no electrical protection at all. It is vented, and vents rule out an electrical rating. For electrical work you need a Class E helmet, such as the non-vented DEWALT DPG22, proof-tested to 20,000 volts.

What are the side vents for?

The vents on either side increase airflow to keep you cooler on hot jobs, which is the main reason to choose a vented helmet. The trade-off is that vents make the helmet Class C, so it cannot be used where electrical protection is required.

Can I use the DPG22V for electrical work?

No. Because it is vented and Class C, it provides no electrical protection. If you work on or near energized conductors, choose the non-vented Class E DPG22 instead, and always follow de-energizing and NFPA 70E practices; a helmet is one layer, not clearance to work live.

Do the vents let in rain, dust, or debris?

Vents allow some airflow and can let in fine dust or light rain, which is the trade-off for cooler wear. In heavy rain, dust, or falling-debris conditions, or where electrical protection is needed, a non-vented helmet like the DPG22 is the better choice.

What is the EPS foam liner for?

EPS is the energy-absorbing foam used in climbing and cycling helmets. With the PC/ABS shell it helps the DPG22V manage the top and lateral impacts a Type II helmet is tested for, which a bare-shell traditional hard hat does not have.

How does the ratchet suspension adjust?

The articulating smooth-glide ratchet lets you set circumference with one hand at the rear knob, and it pivots to sit level. Set it snug but not tight, then tune the chin strap so the helmet stays centered during movement and at height.

Why does it use a 4-point chin strap?

A 4-point strap anchors at four places around the shell, so it holds the helmet securely and keeps it centered during a slip, trip, or lateral impact better than a 2-point strap. That retention is part of what separates a Type II safety helmet from a basic hard hat.

What colors does the DPG22V come in?

DEWALT offers the DPG22V in several colors, including white, yellow, slate, and orange, so crews can color-code by role or trade. This listing is the yellow version; check the exact variant before ordering for a color-matched fleet.

Which ANSI standard does it meet?

It is rated to ANSI/ISEA Z89.1 Type II, Class C. Standards are periodically revised, so confirm the exact edition and markings molded or labeled inside the shell match what your site or contract requires before you put it into service.

Is the DPG22V cap-style or full-brim?

The DPG22V is a climbing- or cap-style safety helmet, not a full-brim hard hat. If you specifically want a 360-degree brim for sun and rain runoff, choose a full-brim helmet instead; the impact rating is separate from the brim style.

How do I clean and maintain it?

Wipe the shell with mild soap and water, and avoid solvents that can weaken polycarbonate. Clean or replace the sweatband and pads as they wear, and inspect the shell, vents, suspension, and chin strap for cracks or damage before each use.

Is a safety helmet different from a traditional hard hat?

Yes. This safety helmet adds Type II lateral protection, an EPS liner, and a 4-point chin strap, closer to a climbing helmet, while a traditional hard hat is often Type 1 and top-impact only. Both must meet Z89.1, but the helmet covers more impact directions.