DEWALT Converter Safety Glasses — ANSI Z87.1+ Glasses-to-Goggle Convertible
EDITORIAL REVIEW: 4.5/5 — WC Safety Review of the DEWALT Converter, the glasses-to-goggle hybrid that switches in the field. Editorial assessment by Steven Eaton, WC Safety editor, based on published DEWALT specific...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Editorial assessment by Steven Eaton, WC Safety editor, based on published DEWALT specifications and category fit. We did not laboratory-test this product.
The DEWALT Converter is a glasses-to-goggle hybrid rated ANSI Z87.1+ that converts in the field between traditional safety glasses and sealed-gasket goggles — using interchangeable ratcheting bayonet temple arms and an elastic head strap. A soft foam frame insert forms a conforming seal against the face in goggle mode for dust and debris exclusion, and a large wraparound lens with an enlarged opening improves sightlines. All three lens options include anti-fog.
CHECK PRICE ON AMAZON → SHOP DEWALT SAFETY GLASSES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the DEWALT Converter replaces two products
Plenty of shifts mix open-air work with bursts of dusty, active work that need a sealed frame — normally that means carrying both safety glasses and goggles. The Converter folds them into one: bayonet temple arms for open-glasses comfort, or an elastic strap with a foam gasket that seals against dust when the work gets heavy. Switch in the field, no second product. The enlarged lens keeps sightlines open even sealed, and every lens is anti-fog. Our full DEWALT Converter review rates it 4.5/5, and the safety glasses buyer's guide covers when a hybrid beats separate frames.
Safety first: in goggle mode the foam gasket seals against dust and debris — a real advantage over open glasses — but the gasket is breathable and is not rated for a chemical splash hazard. For splash, fine mist, or vapor, use a goggle specifically D3 splash-rated (non-vented or indirect-vent) or a face shield rather than the Converter's foam seal. A sealed frame also traps warm air, so the all-anti-fog lenses matter. Match eyewear to measured hazards with the when-do-you-need-safety-glasses guide.
What the listing documents
From the published specs: ANSI Z87.1+ high-impact rating in both modes; interchangeable ratcheting bayonet temple arms and an elastic head strap for field conversion between open glasses and sealed goggles; a soft foam frame insert forming a conforming seal; a large wraparound lens with an enlarged opening; anti-fog on all three lens options — Clear, Smoke, and Indoor/Outdoor; base model DPG83-11. As dewalt safety glasses go, the Converter is the flexible member — a genuine convertible safety glasses build and a true glasses goggle hybrid.
Choosing your Converter variant
All three anti-fog tints share the convertible frame: Clear Anti-Fog from the clear-lens collection for indoor and sealed dusty work, Smoke Anti-Fog for outdoor glare, and Indoor/Outdoor Anti-Fog for shifting light from the I/O collection. Since fog control is built in, the anti-fog guide and anti-fog collection explain why it matters on a sealed frame, and the clear-vs-smoke lens guide settles the outdoor tint.
Where the Converter sits in the DEWALT line and beyond
The Converter is DEWALT's convertible; for fixed open frames the Supervisor is the premium full-frame and the Contractor Pro carries the widest tints. For other foam-sealed hybrids see the foam-lined collection, and where a true sealed splash or vapor barrier is required, step to the safety goggles collection. Browse the full DEWALT safety glasses collection, and the best safety glasses 2026 roundup places the line against other brands.
Where it fits by job and crew orders
The convertible design suits demolition, grinding, and mixed indoor-outdoor work where dust comes and goes — the construction, manufacturing, and mechanics guides rank frames by task, and smaller-faced wearers should check the small-face guide. Where the hazard exceeds sealed dust protection — chemical splash, vapor — step to a dedicated goggle from the broader eye protection collection. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Reading the Z87 marking, and what it does not cover
Protective eyewear in the US is built to ANSI/ISEA Z87.1, and OSHA 1910.133 requires eye protection that meets it. The marking on the frame is the specification, and the important distinction is a single character: Z87 is basic impact, Z87+ is high impact — tested with a quarter-inch steel ball at 150 ft/s for spectacles. If the work throws anything, Z87+ is the line.
The suffixes narrow it further: D3 is splash and droplet, D4 dust, D5 fine dust. These matter because a spectacle cannot earn D3 — droplet protection needs a sealed goggle. Safety glasses are impact protection, not chemical splash protection, however wraparound the lens looks, and substituting one for the other is a common and consequential error.
A face shield is also secondary protection under 1910.133: it is worn over primary eye protection, never instead of it. And tint is not shade — a dark lens without a stated IR/UV shade number offers no rated protection against radiant energy.
Frequently asked questions
What is the DEWALT Converter?
A glasses-to-goggle hybrid rated ANSI Z87.1+ that converts in the field between traditional safety glasses and sealed-gasket goggles, using interchangeable ratcheting bayonet temple arms and an elastic head strap. A soft foam frame insert seals against the face in goggle mode, and all lens options include anti-fog.
How does the conversion work?
Snap in the ratcheting bayonet temple arms to wear it as open safety glasses, or swap to the elastic head strap so the foam gasket seals against your face as a goggle. You change configuration in the field to match the task, without carrying two products.
What does goggle mode protect against?
In strap mode the soft foam gasket forms a conforming seal that blocks fine dust and airborne debris that open glasses let in around the edges - the same particulate barrier a foam-lined goggle provides, on a convertible frame.
Is it rated for chemical splash?
No - the foam gasket is breathable and seals against dust and debris, not liquids. For a chemical splash hazard, use a goggle specifically D3 splash-rated (non-vented or indirect-vent) or a face shield; don't rely on the Converter's foam seal for splash.
Is it ANSI Z87.1+ rated?
Yes - it carries the ANSI Z87.1+ high-impact rating in both configurations, so it meets the requirement for most construction and industrial impact hazards whether worn as glasses or goggles.
Do all the lenses have anti-fog?
Yes - every Converter lens option (Clear, Smoke, and Indoor/Outdoor) includes an anti-fog coating, which matters because the sealed goggle mode traps warm air and would otherwise fog quickly.
What tints does the Converter come in?
Clear Anti-Fog for indoor work, Smoke Anti-Fog for outdoor glare, and Indoor/Outdoor Anti-Fog for shifting light - all with the same convertible frame and foam gasket.
Why the enlarged lens opening?
A larger lens opening improves your field of view and sightlines, which helps in the goggle configuration where a gasket and strap can otherwise feel enclosed. It keeps the convertible feeling open even when sealed.
Who is the Converter for?
Workers whose shift mixes open-air tasks and dusty sealed-protection tasks - so they'd otherwise switch between glasses and goggles. One convertible frame covers both, cutting the gear they carry.
Is it enough, or do I need dedicated goggles?
For impact and dust, the Converter's goggle mode covers it. But it is not a sealed splash or vapor goggle - for a chemical splash hazard, fine mist, or vapor, use a dedicated D3-rated goggle or face shield. Match the eyewear to your hazard assessment.
How do I care for the Converter?
Rinse grit before wiping the lens with a microfiber cloth, keep the foam gasket clean and dry, and store the spare temples or strap with it. Retire the lens once scratches enter your line of sight - a scratched safety lens no longer protects fully.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.