🔍 Click to zoom
DBI-SALA 8000141 Confined Space Tripod — Tall Aluminum Configuration
$2,279.56
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.6/5 — WC Safety review of the DBI-SALA 8000141, the tall Advanced tripod for openings a standard head straddles poorly. Editorial assessment by Steven Eaton, WC Safety editor, based on published ...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.6/5 — WC Safety review of the DBI-SALA 8000141, the tall Advanced tripod for openings a standard head straddles poorly.
Editorial assessment by Steven Eaton, WC Safety editor, based on published 3M DBI-SALA specifications and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on published 3M DBI-SALA specifications and category fit. We did not laboratory-test this product.
The 3M DBI-SALA 8000141 exists for the openings that embarrass standard tripods: raised hatches, oversized collars, curb boxes, and wide vault mouths. It is the tall configuration of the Advanced aluminum line — same brackets, same accessory ecosystem, more reach — sold bare so your program chooses the retrieval hardware.
CHECK PRICE ON AMAZON → SHOP CONFINED SPACE GEAR →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the dbi-sala 8000141 is the odd-geometry answer
Tripod stance is load-path engineering: legs planted square, head centered, line dropping true. Oversized and raised openings break that geometry for standard heads — legs splay wide, angles flatten, and the stance weakens exactly where the loads are highest. The 8000141 buys the reach to keep the stance honest, while staying inside the same Advanced ecosystem of brackets, pulleys, and bases as its standard sibling. The buy-the-geometry-you-have logic is laid out in the confined space equipment collection, and our full 8000141 review maps which openings genuinely need it.
Editor's take: standard collars do not need this much tripod — the 8000140 covers those for meaningfully less. Buy the 8000141 for the vault list where a standard head keeps ending up perched instead of planted.
Building the rescue tripod rig on the tall head
Bare structure in, complete system out: a man-rated winch on the leg bracket for positioning, the Guardian 10974 3-way SRL as the life-safety line with crank-over rescue, cable routed over the 8003205 head pulley so the drop stays centered, and the 8005048 mounting base where the same oversized opening gets worked on a schedule. That combination is what makes the tall head a true rescue tripod rather than just a taller stand. The entrant rides a full-body harness — D-ring guidance in the harness guide — and integrated alternatives like the 8301080 tripod-with-winch suit programs that want the package pre-matched.
Odd geometry changes the anchor, not the rules: the entrant still rides a personal fall arrest system on a vertical entry, and the retrieval line still gets rigged and function-checked before anyone passes the collar.
The permit program around the tall confined space tripod
OSHA 29 CFR 1910.146 asks the same questions at a wide hatch as at a manhole: a tested atmosphere from the 4-gas monitor collection — the H2S guide and industrial CO guide cover the staples — continuous ventilation from an Allegro blower or the high-volume MOUNTO for big vaults, a staged trauma kit, and retrieval wristlets where a nozzle runs narrow. The enforcement arithmetic for cutting corners is tallied in our OSHA PPE violation report.
Fleet logic: one ecosystem, two geometries
Districts with mixed entry lists usually land on both configurations — standard heads for the manhole vans, the 8000141 for the vault and station list — sharing winches, SRLs, and rigging across one documentation chain. The alternatives and trade-offs sit in the ranked tripod systems guide (the MSA Workman anchors the value tier), with the wider load-path context in the SRL buyer's guide, when fall protection is required, and the fall protection range.
Fits your program if
- Your entry list includes raised hatches, curb boxes, or oversized vault collars
- You already run DBI-SALA Advanced hardware and want one accessory ecosystem
- You are building a component rig with your own winch and retrieval SRL
Look elsewhere if
- Your openings are standard collars — the 8000140 costs less and packs smaller
- You want a rig-ready package — integrated and kit options assemble it for you
- You expected retrieval hardware in the box — this is the bare structure
Bottom line: when the opening is the problem, the 8000141 is the fix — the same trusted ecosystem, sized for the geometry your standard tripod keeps losing to.
Frequently asked questions
What is the DBI-SALA 8000141?
The tall configuration of DBI-SALA's Advanced aluminum confined space tripod — same head hardware and bracket compatibility as the standard 8000140, with added height and spread for oversized or raised openings. It is sold bare; retrieval hardware mounts separately.
How does it differ from the 8000140?
Geometry only: the 8000141 reaches higher and spans wider for raised hatches, curb boxes, and wide vault collars, while running identical brackets, pulleys, and winch mounts. If your openings are standard manholes, the 8000140 does the same job for less.
When do I actually need the tall configuration?
When the opening is raised above grade, unusually wide, or fitted with equipment that forces the legs outward — the situations where a standard tripod ends up perched at a compromised angle instead of planted square over the hole.
What winch and SRL does it take?
The same DBI-SALA ecosystem as the rest of the Advanced line: a man-rated winch on the leg bracket and a 3-way retrieval SRL for fall arrest with crank-over rescue, with cable routed over the head pulley so the line drops centered.
Is it a rescue tripod?
It anchors rescue-capable rigs, yes — with a 3-way retrieval SRL mounted, it is the anchor structure for non-entry rescue at exactly the odd-geometry openings where improvised anchors are worst.
Does it include a winch or line?
No — like the 8000140, it is the bare aluminum structure. That is deliberate: component programs choose their own retrieval hardware and keep one documentation chain across the fleet.
What does OSHA require at these openings?
29 CFR 1910.146(k)(3) requires retrieval systems for permit-space entrants, with a mechanical retrieval device for vertical entries deeper than 5 feet. Oversized geometry does not waive the rule — it just makes the anchor structure choice matter more.
Can it still work standard manholes?
Yes — tall heads handle standard collars fine; they simply cost and weigh more than the job needs. Fleets with mixed geometry often run one of each configuration.
How is it inspected?
User check before each setup and formal periodic inspection per DBI-SALA's schedule, together with the winch, SRL, and rigging it carries — the whole load path inspects as a system.
What accessories exist for it?
The Advanced ecosystem: the 8003205 head pulley for centered cable routing and the 8005048 mounting base for fixed, repeatable footprints at scheduled entry points.
Why buy the taller head instead of improvising with a standard one?
Because a standard tripod forced wide on an oversized collar loses stance geometry exactly where the loads are highest. Buying the geometry you actually have is the entire logic of the two configurations.
How do I order for a crew or district?
Quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
3M DBI-SALA
Model / SKU
8000141
Product Type
Confined Space Tripod
Price
$2,279.56 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the DBI-SALA 8000141?
The tall configuration of DBI-SALA's Advanced aluminum confined space tripod — same head hardware and bracket compatibility as the standard 8000140, with added height and spread for oversized or raised openings. It is sold bare; retrieval hardware mounts separately.
How does it differ from the 8000140?
Geometry only: the 8000141 reaches higher and spans wider for raised hatches, curb boxes, and wide vault collars, while running identical brackets, pulleys, and winch mounts. If your openings are standard manholes, the 8000140 does the same job for less.
When do I actually need the tall configuration?
When the opening is raised above grade, unusually wide, or fitted with equipment that forces the legs outward — the situations where a standard tripod ends up perched at a compromised angle instead of planted square over the hole.
What winch and SRL does it take?
The same DBI-SALA ecosystem as the rest of the Advanced line: a man-rated winch on the leg bracket and a 3-way retrieval SRL for fall arrest with crank-over rescue, with cable routed over the head pulley so the line drops centered.
Is it a rescue tripod?
It anchors rescue-capable rigs, yes — with a 3-way retrieval SRL mounted, it is the anchor structure for non-entry rescue at exactly the odd-geometry openings where improvised anchors are worst.
Does it include a winch or line?
No — like the 8000140, it is the bare aluminum structure. That is deliberate: component programs choose their own retrieval hardware and keep one documentation chain across the fleet.
What does OSHA require at these openings?
29 CFR 1910.146(k)(3) requires retrieval systems for permit-space entrants, with a mechanical retrieval device for vertical entries deeper than 5 feet. Oversized geometry does not waive the rule — it just makes the anchor structure choice matter more.
Can it still work standard manholes?
Yes — tall heads handle standard collars fine; they simply cost and weigh more than the job needs. Fleets with mixed geometry often run one of each configuration.
How is it inspected?
User check before each setup and formal periodic inspection per DBI-SALA's schedule, together with the winch, SRL, and rigging it carries — the whole load path inspects as a system.
What accessories exist for it?
The Advanced ecosystem: the 8003205 head pulley for centered cable routing and the 8005048 mounting base for fixed, repeatable footprints at scheduled entry points.
Why buy the taller head instead of improvising with a standard one?
Because a standard tripod forced wide on an oversized collar loses stance geometry exactly where the loads are highest. Buying the geometry you actually have is the entire logic of the two configurations.
How do I order for a crew or district?
Quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.