PIP MaxiFlex Cut Nitrile-Coated Gloves, A2 Cut-Resistant

PIP MaxiFlex Cut nitrile-coated gloves — ANSI A2 Cut-Resistant Work Gloves

The PIP MaxiFlex Cut nitrile-coated gloves give your crew ANSI/ISEA 105 A2 cut resistance in a MaxiFlex Cut that pairs a MaxiFlex Cut seamless knit with a breathable micro-foam nitrile coating. Before you order, read the full specification-based review or see how it stacks up in the cut-resistant gloves buyer’s guide.

New to cut ratings? The ANSI/ISEA 105 cut levels A1–A9 guide and our how to read an ANSI cut level reference explain exactly what an cut resistant nitrile gloves rating like A2 stops — and what it does not.

Key features

• Breathable micro-foam nitrile, multi-pack value
• ANSI/ISEA 105 A2 cut-resistant liner
• Sold in a multi-pack
• Built for all-day precision handling, assembly, and inspection
• Sold as micro foam nitrile gloves for buyers cross-shopping that term

Pros & cons

Specifications

What the PIP MaxiFlex Cut is for

Reach for the PIP MaxiFlex Cut for all-day precision handling, assembly, and inspection. Browse the full cut-resistant gloves range, or the broader hand protection catalog, to line it up against alternatives. Not sure where to start? Our how to choose work gloves reference walks through the decision. Buyers also stock these alongside material-handling gloves and search them as A2 cut resistant gloves.

Which size should you order?

Sold in a multi-pack. Measure across your palm and check the glove size chart — a cut liner should fit snug so it does not bunch at the fingertips. The how to choose cut gloves by ANSI level walk-through helps you match both the size and the protection tier to your task.

How the PIP MaxiFlex Cut compares

Weigh the PIP MaxiFlex Cut against PIP MaxiFlex Cut 34-8743, Ansell HyFlex 11-518, Ansell HyFlex 11-531. Need a higher tier? Step up through the A5 cut gloves or compare tiers in the A4 vs A5 guide. For impact as well as cut, see the impact-resistant gloves line. The best cut-resistant gloves guide ranks the full field so you can see where this pick lands.

Safety note: Cut and impact gloves reduce — but never eliminate — injury risk, and they are not rated against a chemical splash hazard, solvents, or live electrical work. Match the glove to a documented hazard assessment and replace any pair once the liner is nicked or worn through.

Ordering FAQ

What ANSI cut level is the PIP MaxiFlex Cut?
It carries an ANSI/ISEA 105 A2 cut rating. Cut ratings describe lab cut resistance, not a cut-proof guarantee.

Is the PIP MaxiFlex Cut in stock and ready to ship?
This listing is active and ships through Amazon. Select your size to see live availability and shipping speed.

What size of the PIP MaxiFlex Cut should I order?
Sold in a multi-pack. Measure across your palm and use the glove size chart; a cut liner should fit snug, not loose.

Can I order the PIP MaxiFlex Cut by the case?
Most sizes ship by the pair or by the box; bulk and case options appear on the linked Amazon listing for each size.

What tasks is the PIP MaxiFlex Cut the right pick for?
It is built for all-day precision handling, assembly, and inspection. Match it to your hazard assessment before relying on it.

Does the PIP MaxiFlex Cut work with touchscreens?
Touchscreen capability varies by size and coating; check the linked listing for the exact model you select.

How is the PIP MaxiFlex Cut different from a disposable glove?
This is a reusable work glove with a knit or leather build, not a single-use disposable. It is washed and reused, not discarded after one task.

Is the PIP MaxiFlex Cut heat-resistant?
No — it is not a heat glove. For hot surfaces, choose a dedicated heat-resistant glove.

Does the PIP MaxiFlex Cut have impact protection?
No — it has no back-of-hand impact guards. For knuckle hazards, choose an impact-rated glove.

How do I reorder the PIP MaxiFlex Cut later?
Reorder by the model number shown in the specifications above, or return to this page and select your size again.

Should I buy the PIP MaxiFlex Cut or step up a cut tier?
If your task matches the rating, this is the right pick; if you handle thinner or sharper stock, step up a cut level.

Where can I read an independent review of the PIP MaxiFlex Cut?
See our full specification-based review, linked at the top of this page, for build notes, pros and cons, and how it compares to the rest of the lineup.

As an Amazon Associate, WC Safety earns from qualifying purchases. Affiliate links do not affect the price you pay.