Mechanix Durahide F9-360 Gloves, A9 Cut-Resistant Leather

Mechanix Durahide F9-360 gloves — ANSI A9 Cut-Resistant Work Gloves

The Mechanix Durahide F9-360 gloves give your crew ANSI/ISEA 105 A9 cut resistance in a Durahide F9-360 that pairs a Durahide leather build with an all-around 360 A9 cut liner and TPR knuckle guards. Before you order, read the full hands-on review or see how it stacks up in the cut-resistant gloves buyer’s guide.

New to cut ratings? The ANSI/ISEA 105 cut levels A1–A9 guide and our how to read an ANSI cut level reference explain exactly what an A9 cut resistant gloves rating like A9 stops — and what it does not.

Key features

• 360-degree A9 cut coverage — highest cut tier
• ANSI/ISEA 105 A9 cut-resistant liner
• Sizes S through 2XL
• Built for heavy material handling, demolition, and oil & gas work
• Sold as cut resistant leather gloves for buyers cross-shopping that term

Pros & cons

Specifications

What the Mechanix Durahide F9-360 is for

Reach for the Mechanix Durahide F9-360 for heavy material handling, demolition, and oil & gas work. Browse the full cut-resistant gloves range, or the broader hand protection catalog, to line it up against alternatives. For knuckle hazards, the ANSI/ISEA 138 impact standard explains the levels. Not sure where to start? Our how to choose work gloves reference walks through the decision. Buyers also stock these alongside material-handling gloves and search them as leather impact gloves.

Which size should you order?

Sizes S through 2XL. Measure across your palm and check the glove size chart — a cut liner should fit snug so it does not bunch at the fingertips. The how to choose cut gloves by ANSI level walk-through helps you match both the size and the protection tier to your task.

How the Mechanix Durahide F9-360 compares

Weigh the Mechanix Durahide F9-360 against Mechanix M-Pact, Mechanix Original, Mechanix Pursuit D5. Need a higher tier? Step up through the A5 cut gloves or compare tiers in the A4 vs A5 guide. For impact as well as cut, see the impact-resistant gloves line. The best cut-resistant gloves guide ranks the full field so you can see where this pick lands.

Safety note: Cut and impact gloves reduce — but never eliminate — injury risk, and they are not rated against a chemical splash hazard, solvents, or live electrical work. Match the glove to a documented hazard assessment and replace any pair once the liner is nicked or worn through.

Ordering FAQ

What ANSI cut level is the Mechanix Durahide F9-360?
It carries an ANSI/ISEA 105 A9 cut rating. Cut ratings describe lab cut resistance, not a cut-proof guarantee.

Is the Mechanix Durahide F9-360 in stock and ready to ship?
Yes — this listing is active and ships through Amazon. Select your size to see live availability and shipping speed.

What size of the Mechanix Durahide F9-360 should I order?
Sizes S through 2XL. Measure across your palm and use the glove size chart; a cut liner should fit snug, not loose.

Can I order the Mechanix Durahide F9-360 by the case?
Most sizes ship by the pair or by the box; bulk and case options appear on the linked Amazon listing for each size.

What tasks is the Mechanix Durahide F9-360 the right pick for?
It is built for heavy material handling, demolition, and oil & gas work. Match it to your hazard assessment before relying on it.

Does the Mechanix Durahide F9-360 work with touchscreens?
Yes — the fingertips are touchscreen-capable.

How is the Mechanix Durahide F9-360 different from a disposable glove?
This is a reusable work glove with a knit or leather build, not a single-use disposable. It is washed and reused, not discarded after one task.

Is the Mechanix Durahide F9-360 heat-resistant?
No — it is not a heat glove. For hot surfaces, choose a dedicated heat-resistant glove.

Does the Mechanix Durahide F9-360 have impact protection?
Yes — it carries back-of-hand TPR impact guards rated to ANSI/ISEA 138.

How do I reorder the Mechanix Durahide F9-360 later?
Reorder by the model number shown in the specifications above, or return to this page and select your size again.

Should I buy the Mechanix Durahide F9-360 or step up a cut tier?
If your task matches the rating, this is the right pick; if you handle thinner or sharper stock, step up a cut level.

Where can I read an independent review of the Mechanix Durahide F9-360?
See our full hands-on review, linked at the top of this page, for build notes, pros and cons, and how it compares to the rest of the lineup.

As an Amazon Associate, WC Safety earns from qualifying purchases. We stock and curate this product; affiliate links do not affect the price you pay.