🔍 Click to zoom
MCR Safety 9278NF CutPro A3 Cut-Resistant Gloves
Size: X-Small
EDITORIAL REVIEW: 4.5/5 WC Safety Review — MCR Safety 9278NF CutPro A3 Cut-Resistant Gloves Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We d...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 WC Safety Review — MCR Safety 9278NF CutPro A3 Cut-Resistant Gloves
Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.
MCR Safety 9278NF CutPro A3 Cut-Resistant Gloves Overview
The MCR Safety 9278NF CutPro A3 Cut-Resistant Gloves are a mid-tier cut-resistant gloves option for crews that handle sheet metal edges, trim, fasteners, and small parts but don't need the bulk or cost of a high-level sleeve. The 9278NF carries an ANSI/ISEA 105 cut level A3 rating, which sits in the practical middle of the A1 through A9 scale — enough to defend against incidental contact with light-to-moderate edges while keeping the glove thin and dexterous.
A nitrile-foam palm coating gives the 9278NF its grip and abrasion resistance, holding onto dry and lightly oily parts without the slick feel of a bare knit. Because the CutPro 9278NF is an industrial work glove, it is not an exam, food-contact, or disposable product — buy it for hand protection on the line, not for clean-room or food-prep duty. Compare it against the rest of MCR's CutPro family below, and use the how to choose cut-resistant gloves by ANSI level guide if you're deciding between A3 and a higher tier.
What MCR Safety Is Built For
| Task | Fit | Buyer guidance |
|---|---|---|
| Sheet-metal and parts assembly | Strong fit | A3 cut protection handles trim and light edges; thin build keeps fastener dexterity. |
| Warehouse and material handling | Strong fit | Nitrile-foam palm grips boxes, totes, and banding; pair with broader material-handling gloves selection for mixed tasks. |
| Automotive and light fabrication | Good fit | Dry-to-light-oily grip suits parts work; step up a cut tier for heavy stamping or glass. |
| Glass and metal stamping (heavy edges) | Step up | Move to an A5-A9 CutPro for sustained contact with sharp, high-energy edges. |
| Chemical or solvent immersion | Not suitable | 9278NF is not a chemical barrier; use dedicated chemical-resistant gloves instead. |
Cut and impact gloves reduce injury risk but do not make a task safe. Match the ANSI/ISEA 105 cut level (A1–A9) and ANSI/ISEA 138 impact level to the real hazard, inspect each pair for wear before use, and follow your site's hand-protection program. No glove is cut-proof or puncture-proof — keep hands clear of moving blades and pinch points. See ANSI/ISEA 105 cut levels explained.
Pros & Cons
Pros
- ANSI/ISEA 105 cut level A3 protection for moderate-edge tasks
- Nitrile-foam palm coating grips dry and lightly oily parts
- Thin, dexterous build keeps fastener and small-part feel
- Available across a size run (XS-XL) for a consistent crew fit
- Backed by MCR Safety's established CutPro line
Cons
- A3 is mid-tier — not enough for heavy stamping, glass, or high-energy edges
- Not a chemical, heat, or needle barrier
- Not food-safe, medical, or disposable — industrial use only
- Coated palm wears faster than a leather-reinforced glove on abrasive work
How It Compares
Within MCR's CutPro line, the 9278NF is the entry-protection choice: its A3 rating covers everyday edges, while the A5 92785NF-XL CutPro A5 and the A8 92743LT step up for sharper, sustained contact. If your work mixes cut hazards with impact — back-of-hand knocks on machinery or pipe — look instead at MCR's impact-resistant gloves such as the Predator impact gloves, which add TPR impact protection the 9278NF does not have. Choose the 9278NF when A3 is enough and you want maximum dexterity at the lowest tier.
Specifications
| Brand / Model | MCR Safety 9278NF (CutPro) |
| Glove type | Cut-resistant work glove |
| Cut rating | ANSI/ISEA 105 cut level A3 |
| Palm coating | Nitrile foam |
| Best for | Assembly, parts handling, light fabrication, warehouse |
| Sizing | XS through XL (size run) |
| Not rated for | Chemical immersion, high heat, food contact |
Related Glove Resources
cut-resistant gloves impact-resistant gloves material-handling gloves chemical-resistant gloves heat-resistant gloves nitrile gloves how to choose cut-resistant gloves by ANSI level ANSI/ISEA 105 cut levels explained nitrile gloves guide EN 388 glove standard explained
Frequently Asked Questions
What cut level are the MCR 9278NF CutPro gloves?
They carry an ANSI/ISEA 105 cut level A3 rating, the practical mid-point of the A1-A9 scale. See the ANSI/ISEA 105 cut levels explained guide for how A3 compares to higher tiers.
What does A3 cut resistance actually protect against?
A3 defends against incidental contact with light-to-moderate edges like sheet-metal trim, fasteners, and box banding. For heavy stamping, glass, or sustained sharp-edge contact, step up to A5 or higher.
What is the palm coating on the 9278NF?
The 9278NF uses a nitrile-foam palm coating, which grips dry and lightly oily parts and adds abrasion resistance over a bare knit liner.
Are these gloves food-safe or medical-grade?
No. The 9278NF is an industrial cut-resistant work glove, not a food-contact, exam, or disposable product. Use it for hand protection on the line, not clean-room or food-prep duty.
Are the 9278NF gloves chemical-resistant?
No. They are not a chemical barrier. For solvent or chemical immersion, use dedicated chemical-resistant gloves instead.
What sizes do the 9278NF CutPro gloves come in?
The 9278NF is offered across a size run from XS through XL. Check the glove size chart to match hand circumference before ordering for a crew.
How do I choose between A3 and a higher cut level?
Match the level to your sharpest sustained hazard, not your average task. A3 suits assembly and parts work; heavy edges call for A5-A9. The how to choose cut-resistant gloves by ANSI level guide walks through it.
How does the 9278NF compare to the CutPro A5 92785NF?
The A5 92785NF offers higher cut protection for sharper edges, while the A3 9278NF stays thinner and more dexterous for lighter tasks. Choose A5 when edge contact is more frequent or severe.
Do these gloves provide impact protection?
No, the 9278NF is a cut glove without TPR impact protection. If you need impact defense, look at impact-resistant gloves such as the MCR Predator line, which add back-of-hand protection.
Are the 9278NF gloves good for warehouse and material handling?
Yes. The nitrile-foam palm grips boxes, totes, and banding well, and A3 cut protection covers most warehouse edges. For mixed tasks, browse the material-handling gloves selection.
What standards apply to these cut-resistant gloves?
Cut performance is rated under ANSI/ISEA 105 (A3). Many comparable gloves also carry an EN 388 rating in Europe; see the EN 388 glove standard explained reference for how those scores map.
Will the nitrile-foam coating hold up on abrasive work?
The coating resists abrasion well for assembly and handling, but on heavily abrasive surfaces a coated palm wears faster than a leather-reinforced glove. Match the glove to the duty cycle and rotate as the palm shows wear.
Written by Steven Eaton, WC Safety Editorial — hand-protection desk. Specifications sourced from MCR Safety published data. Compare the range in cut-resistant gloves.
WC Safety is an independent PPE retailer and Amazon Associate; no paid placement. Match the glove to your specific hazard and follow your site PPE program.
Brand / Vendor
MCR Safety
Model / SKU
9278NF-XS
Product Type
Cut-Resistant Gloves
Condition
New
MPN
9278NF-XS
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.