🔍 Click to zoom
CutPro A5 Cut-Resistant Gloves — MCR Safety 92785NFS Micro-Foam Nitrile (Small)
Size: S
EDITORIAL REVIEW: 4.5/5 WC Safety Review — MCR Safety 92785NFS CutPro A5 Micro Foam Nitrile Gloves — Small Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and cat...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 WC Safety Review — MCR Safety 92785NFS CutPro A5 Micro Foam Nitrile Gloves — Small
Editorial assessment by the WC Safety Editorial Team, based on published MCR Safety specifications and category fit. We did not laboratory-test this glove.
CHECK PRICE ON AMAZON →SHOP CUT-RESISTANT GLOVES →
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
CutPro A5 Cut-Resistant Gloves — MCR Safety 92785NFS Micro-Foam Nitrile (Small) Overview
The MCR Safety 92785NFS CutPro is an industrial cut-resistant glove rated ANSI/ISEA 105 Level A5 — high-cut protection for sheet-metal handling, glass, blade work, and parts assembly where a thin disposable or a basic knit won't keep crew hands intact. The micro-foam nitrile palm coating bites into dry and lightly oiled surfaces while keeping the back of the hand breathable, so operators get grip and dexterity without trading away cut performance. This listing is the Small size; size up across the line for a fleet fit using the glove size chart.
The A5 shell sits in the upper-middle band of the ANSI/ISEA 105 cut levels — meaningfully tougher than A2–A3 knits but lighter and more flexible than A8–A9 needle-resist gloves. For most metal-fab, fabrication, and warehouse cut hazards, A5 is the standard buy. If you're spec'ing protection by hazard, the how to choose cut-resistant gloves by ANSI level guide maps tasks to ratings. Buyers comparing nitrile dip chemistry and coating wear can reference the nitrile gloves guide before standardizing a line on the 92785NFS.
What MCR Safety Is Built For
| Task | Fit | Buyer guidance |
|---|---|---|
| Sheet-metal and stamping handling | Strong fit | A5 shell resists slicing on burred edges; micro-foam palm grips dry stock without slipping. |
| Glass and panel handling | Strong fit | High cut rating suits framing and glazing crews; pair sizing to a snug fingertip for control. |
| Light-oil parts assembly | Good fit | Micro-foam nitrile channels light oil for grip; not a substitute for chemical-resistant gloves in solvent immersion. |
| Warehouse and material handling | Good fit | Breathable back keeps hands cool over a shift; see material-handling gloves for lower-cut alternatives. |
| Heavy chemical immersion | Not suitable | Coated cut glove, not a sealed barrier — choose chemical-resistant gloves for solvent or acid contact. |
| Hot-surface or welding work | Not suitable | No thermal rating claimed; use heat-resistant gloves or welding-specific impact gloves for heat hazards. |
Cut and impact gloves reduce injury risk but do not make a task safe. Match the ANSI/ISEA 105 cut level (A1–A9) and ANSI/ISEA 138 impact level to the real hazard, inspect each pair for wear before use, and follow your site's hand-protection program. No glove is cut-proof or puncture-proof — keep hands clear of moving blades and pinch points. See ANSI/ISEA 105 cut levels explained.
Pros & Cons
Pros
- ANSI/ISEA 105 Level A5 cut protection — upper-middle band, covers most metal-fab and fabrication hazards
- Micro-foam nitrile palm grips dry and lightly oiled surfaces
- Breathable back of hand keeps the glove cool over a full shift
- Thin, flexible A5 shell preserves fingertip dexterity for assembly and parts work
- Part of a sized CutPro line (this is Small) for consistent fleet standardization
Cons
- Coated cut glove, not a sealed barrier — not for chemical immersion
- No published ANSI/ISEA 138 impact or thermal rating
- Small size runs snug; confirm hand measurement before bulk ordering
- Not food-safe or medical-grade — strictly an industrial work glove
How It Compares
Within the CutPro line, the 92785NFS is the micro-foam nitrile A5 build sized Small; the same A5 shell ships in larger sizes such as the 92785NF-XL for mixed-hand crews. Step down to the A3 9278NF for lighter cut hazards and better breathability, or up to the A8 92743LT crinkle-latex build when blade and edge exposure is severe. For grip-only abrasion work without high cut needs, browse material-handling gloves or the broader nitrile gloves range. Buyers cross-shopping ratings should read the EN 388 glove standard explained to translate ANSI cut levels for EU-spec sites.
Specifications
| Brand / Model | MCR Safety 92785NFS (CutPro) |
| Glove type | Cut-resistant work glove (industrial) |
| Cut rating | ANSI/ISEA 105 Level A5 |
| Palm coating | Micro-foam nitrile |
| Coverage | Palm-dipped, breathable knit back |
| Size | Small |
| Best for | Dry to light-oil handling |
Related Glove Resources
cut-resistant gloves impact-resistant gloves material-handling gloves chemical-resistant gloves heat-resistant gloves nitrile gloves how to choose cut-resistant gloves by ANSI level ANSI/ISEA 105 cut levels explained nitrile gloves guide EN 388 glove standard explained
Frequently Asked Questions
What cut level is the MCR Safety 92785NFS?
It is rated ANSI/ISEA 105 Level A5 — high-cut protection in the upper-middle band of the A1–A9 scale, suited to sheet-metal, glass, and blade-edge handling.
Is the 92785NFS a food-safe or medical glove?
No. It is an industrial cut-resistant work glove, not a food-handling or medical exam glove. Use disposable food-grade gloves for food contact and exam gloves for clinical use.
What does the micro-foam nitrile coating do?
The micro-foam nitrile palm coating channels away light oil and bites into dry surfaces for grip, while the uncoated knit back stays breathable so hands stay cooler over a shift.
What size is this listing?
This is the Small (S) size. The CutPro A5 line is offered in larger sizes for full-crew fits — check the glove size chart to map hand measurements before ordering.
How does A5 compare to A3 or A8?
A5 offers more cut protection than A2–A3 knits but is lighter and more flexible than A8–A9 needle-resist gloves. It's the standard pick for most metal-fab and fabrication cut hazards. See the ANSI/ISEA 105 cut levels guide for the full scale.
Can I use these gloves for chemical handling?
No. This is a coated cut glove, not a sealed liquid barrier. For solvent, acid, or immersion work, choose chemical-resistant gloves rated for the specific chemical.
Do these gloves have an impact rating?
No ANSI/ISEA 138 impact rating is published for the 92785NFS. If you need back-of-hand impact protection, look at dedicated impact-resistant gloves instead.
Are these gloves good for light-oil work?
Yes. The micro-foam nitrile palm is designed to grip dry and lightly oiled parts. For heavy oil or full immersion, step up to a chemical-resistant glove.
Will these work for warehouse and material handling?
Yes, for cut-hazard handling. The breathable back keeps hands cool over a shift. For lower-cut, grip-focused tasks you can also compare material-handling gloves.
How do I choose the right cut level for my job?
Match the ANSI/ISEA 105 cut level to the sharpest edge your crew handles. The how to choose cut-resistant gloves by ANSI level guide walks through hazard-to-rating mapping; A5 covers most general metal and fabrication work.
How does the ANSI A5 rating translate to EN 388?
ANSI/ISEA 105 and EN 388 use different cut test methods, so ratings don't map one-to-one. The EN 388 glove standard explained reference shows how to read each scale for cross-spec ordering.
Can I standardize my whole crew on this glove?
Yes. The 92785NFS is part of the sized CutPro A5 line, so you can order Small here and matching larger sizes for a consistent fleet spec. Confirm each operator's size with the glove size chart and review the nitrile gloves guide for coating-wear expectations.
Written by Steven Eaton, WC Safety Editorial — hand-protection desk. Specifications sourced from MCR Safety published data. Compare the range in cut-resistant gloves.
WC Safety is an independent PPE retailer and Amazon Associate; no paid placement. Match the glove to your specific hazard and follow your site PPE program.
Brand / Vendor
MCR Safety
Model / SKU
92785NFS
Product Type
Cut Resistant Gloves
Condition
New
MPN
92785NFS
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.