Guardian 10715 Concrete Anchor Fall Protection Strap, 4 ft

A concrete anchor fall protection strap for slab work — Guardian 10715

On a concrete deck the tie-off point is a cast-in insert, not a beam or a ridge — and connecting to it needs the right strap. Concrete anchor fall protection is exactly the Guardian 10715’s job: 4 feet of web with a loop on one end and a D-ring on the other, wrapped in protective sheathing that survives the abrasion concrete inflicts on bare webbing. Loop it to the slab anchor, clip your lanyard to the D-ring, and the deck has a rated connection point.

Crews searching concrete tie off anchors or guardian concrete anchor usually need two things — the anchor set in the slab and the strap that connects to it. This is the strap; the sheathing is why it lasts where a plain sling would chafe through.

Key features

• 4 ft web strap: loop end + D-ring end
• Protective sheathing guards webbing from concrete abrasion
• Connects to cast-in inserts and slab-set concrete anchor points
• Rated D-ring tie-off for lanyards and SRLs
• Guardian Fall Protection — SKU 10715, live Amazon pricing on the linked listing

Pros & cons

Specifications

What the 10715 is for

Tilt-up and precast construction, parking structures, bridge decks, and any concrete slab where the anchor is cast in — the tie-off concrete anchor points for fall protection a steel strap or roof bracket cannot serve. It sits in the concrete corner of the anchor points collection, supplies the A of the ABC system in the fall protection equipment guide, and pairs with a harness from the ranked harness guide and the site loadout in the construction PPE checklist.

Building the system on this strap

The 10715 is the flexible link; the anchor it attaches to is hardware like the Werner A510000 reusable concrete anchor. Clip a lanyard from the lanyards collection (ranked in the lanyard guide) or an SRL from the SRL collection (ranked in the SRL guide) to the D-ring, and outfit every harness with trauma straps. One-box roofing and slab starters live in the ranked kits guide, and self-connection gets easier with a D-ring extender.

How the 10715 compares

For steel rather than concrete, a wrap-style cross arm strap or the bolt-on FallTech 7414 is the right connection; abrasive or hot paths take the galvanized Guardian 10412 cable choker. Roof surfaces belong to the Guardian ridge anchors instead. The full field lives in the fall protection collection.

Safety note: a connecting strap is one component of a personal fall arrest system — the concrete anchor it attaches to must be rated and installed by a qualified person, the sheathing must actually protect the web from the slab edge, and OSHA 1926.502’s 5,000 lb-per-worker anchorage rule governs the rig in use. Add the strap length to your clearance math, anchor at or above the D-ring where geometry allows, and retire every loaded component after an arrest.

Ordering FAQ

Is the Guardian 10715 in stock and ready to ship?
Yes — this listing is active and ships through Amazon. Open the linked listing for live price, availability, and delivery speed.

How does the 10715 concrete anchor strap work?
It is a 4 ft web strap with a loop on one end and a D-ring on the other: connect the loop to a cast-in concrete anchor point or a suitable structural element per Guardian’s instructions, and the D-ring becomes your rated tie-off connection.

What is the protective sheathing for?
The sheathing shields the webbing from abrasion against concrete edges and rough surfaces — the wear point that would otherwise shorten a bare strap’s life on a slab.

Does this strap set its own anchor in concrete?
No — it is the connecting strap, not a drop-in anchor. It attaches to a cast-in insert or a reusable concrete anchor already set in the slab; for that hardware, see a reusable concrete anchor.

What connects to the D-ring?
A shock-absorbing lanyard or SRL via a rated self-locking snap hook or carabiner. Anchor at or above your dorsal D-ring where geometry allows and run the clearance math before choosing the connector.

Is the 10715 OSHA compliant?
It serves the connecting role between anchor and worker in a fall arrest rig — OSHA 1926.502 requires 5,000 lb per attached worker or a qualified-person design, and the concrete anchor point it attaches to must meet that rating.

Where are concrete anchor straps used?
Concrete decks, tilt-up and precast construction, parking structures, and bridge work — anywhere the tie-off point is a cast-in insert or slab-set anchor rather than steel or a shingle roof.

How long is the strap?
4 feet — enough reach to route from a slab-level anchor point to a working connection without adding unnecessary free fall. Include its length in your clearance math.

How many workers can use one strap?
One per anchor point unless Guardian’s instructions state otherwise — the OSHA anchorage requirement applies per attached worker, and it is the concrete anchor’s rating that governs.

How do I inspect the 10715?
Before each use: webbing and sheathing free of cuts, fraying, burns, UV chalking, and chemical damage; stitching intact; the loop and D-ring free of deformation or cracks. Retire after any fall arrest with the loaded system.

Concrete anchor strap or a reusable concrete anchor — which do I need?
Often both: the reusable anchor is the hardware set in or clamped to the slab, and this strap is the flexible rated connection from that anchor to your lanyard. Match the strap to the anchor’s connection point.

Can I use this strap on steel instead of concrete?
Steel beams have their own tool — a cross arm strap sized to wrap the member. Use this concrete strap for its intended slab-anchor connection unless Guardian’s instructions cover another use.

How do I reorder these for a crew?
Reorder from this page — the listing and its linked Amazon ASIN stay constant, so equipping every concrete tie-off position takes seconds.

As an Amazon Associate, WC Safety earns from qualifying purchases. We stock this product; affiliate links do not affect the price you pay.