Guardian 10412 Fall Protection Choker — 6 ft Galvanized Cable Anchor

A fall protection choker for steel that cuts webbing — Guardian 10412

A webbing strap is the fast answer for overhead steel — until the beam has a sharp edge, weld spatter, or heat, and the web is the weak link. That is where a fall protection choker in galvanized cable earns its place: the Guardian 10412 wraps a beam or column in 6 feet of wire rope, chokes one O-ring through the other, and leaves a rated tie-off that the wrap path can no longer threaten. It is the durable cousin of the cross-arm strap, built for hostile steel.

As a cable choker anchor — Guardian calls it a galvanized cable choker; riggers call it a wire rope anchor sling — the 10412 does the strap’s job where webbing simply would not survive. The 2.5-inch and 3-inch O-ring ends form the choke and the connection point.

Key features

• 6 ft galvanized wire-rope choker anchor
• 2.5-inch and 3-inch O-ring ends form the choke and connection
• Cut-, abrasion-, and heat-resistant where webbing fails
• The cable cross arm anchor for steel erection and welding environments
• Guardian Fall Protection — SKU 10412, live Amazon pricing on the linked listing

Pros & cons

Specifications

What the 10412 is for

Steel erection, heavy fabrication, and welding work where the anchor’s wrap path is exactly the surface that destroys webbing. It fills the cable-anchor slot of the connectors collection, supplies the A of the ABC system in the fall protection equipment guide, and can serve as end anchorage for a horizontal lifeline span per the system manual. The worker’s side starts at the ranked harness guide and the loadout in the construction PPE checklist.

Building the system on this anchor

Clip a shock-absorbing lanyard from the lanyards collection (ranked in the lanyard guide) or an SRL from the SRL collection (ranked in the SRL guide) to the standing O-ring — a Saflok carabiner keeps the connection clean, and every harness in the plan should carry trauma straps.

How the 10412 compares

The webbing alternatives — Guardian 10787, 01630 X-ARM-48, and the Werner strap — are lighter and cheaper on clean steel; this cable choker is the pick when the wrap path bites back. Steel you can through-drill takes the bolt-on FallTech 7414, and concrete takes the sheathed Guardian 10715. The full field lives in the fall protection collection.

Safety note: a cable choker is one component of a personal fall arrest system — wrap it per Guardian’s instructions on structure a qualified person judges adequate, avoid crushing the cable over a knife edge, and let OSHA 1926.502’s 5,000 lb-per-worker anchorage rule govern the rig in use. Anchor at or above the O-ring where geometry allows, run the clearance math, and retire every loaded component after an arrest.

Ordering FAQ

Is the Guardian 10412 in stock and ready to ship?
Yes — this listing is active and ships through Amazon. Open the linked listing for live price, availability, and delivery speed.

What is a cable choker anchor?
A wire-rope sling that wraps a beam or column and passes one O-ring end through the other to choke tight — the same rig concept as a webbing cross-arm strap, but in galvanized cable that resists cutting, abrasion, and heat.

Why choose cable over a webbing strap?
Sharp edges, weld spatter, and rough steel cut webbing; galvanized cable shrugs them off. Where the wrap path is abrasive or hot, the cable choker outlasts a web strap — that is the whole reason to carry one.

What are the O-ring ends for?
One O-ring passes through the other to form the choke around the steel, and the standing O-ring becomes the connection point for your rated snap hook or carabiner. The 10412 has a 2.5-inch and a 3-inch O-ring.

How long is the 10412?
6 feet of cable — enough to wrap substantial columns and beams. Match the length to the girth of the member so the choke closes with the connecting O-ring clear of the wrap.

What connects to the anchor?
A shock-absorbing lanyard or SRL through a rated self-locking snap hook or carabiner on the standing O-ring. Anchor at or above your dorsal D-ring where geometry allows and run the clearance math before choosing the connector.

Is the 10412 OSHA compliant?
It serves the anchorage role in a fall arrest rig — OSHA 1926.502 requires 5,000 lb per attached worker or a qualified-person design, with the cable wrapped per Guardian’s instructions on structure that can take the load.

Where are cable chokers used?
Steel erection, heavy industrial, and welding environments — anywhere a webbing strap’s wrap path would face cutting edges, weld spatter, or heat. It is the durable cross-arm alternative for hostile steel.

Can cable damage the structure or itself?
Cable is far more edge-tolerant than webbing but not indestructible — inspect for broken wires, kinks, and birdcaging, and avoid crushing the cable over a knife edge. A damaged sling retires immediately.

How many workers can tie off to one choker?
One per anchor unless Guardian’s instructions state otherwise — the OSHA anchorage requirement applies per attached worker.

How do I inspect a cable choker anchor?
Before each use: run the cable through a gloved hand feeling for broken wires and kinks, check for birdcaging and corrosion through the galvanizing, and confirm the O-rings are free of deformation or cracks. Retire after any fall arrest with the loaded system.

Cable choker or webbing cross arm strap — which should I buy?
Clean, edge-free steel favors the lighter, cheaper webbing strap; abrasive, sharp, or hot wrap paths favor this cable choker. Many steel crews carry both and pick per the beam in front of them.

How do I reorder chokers for a crew?
Reorder from this page — the listing and its linked Amazon ASIN stay constant, so adding a cable choker to every kit and gang box takes seconds.

As an Amazon Associate, WC Safety earns from qualifying purchases. We stock this product; affiliate links do not affect the price you pay.