FallTech 7414 D Ring Anchor Point — Bolt-On Anchorage

A D ring anchor point that bolts to the structure — FallTech 7414

Roof brackets solve pitched shingle work; everything else needs a d ring anchor point fastened to real structure. The FallTech 7414 is that hardware: an anchorage plate that bolts through a structural member and leaves a rated D-ring wherever workers tie off again and again — mezzanines, platforms, rooftop units, loading positions. Install it once at each recurring exposure and the improvised tie-off problem disappears.

Searches for the exact falltech 7414 bolt on d ring anchorage land here; the broader ring anchor point question — which fixed ring, fastened how, rated for what — is what this page answers. One boundary up front: this is fall protection hardware, not a cargo tie-down ring; lashing points are a different product class with different ratings.

Key features

• Bolt-on anchorage plate with fixed rated D-ring
• Through-fastens to structural members per FallTech’s instructions
• Serves recurring tie-off positions where anchors should always exist
• Takes standard rated snap hooks, carabiners, lanyards, and SRLs
• FallTech — SKU 7414, live Amazon pricing on the linked listing

Pros & cons

Specifications

What the 7414 is for

Fixed positions with repeat exposure — the places a hazard assessment marks “tie off here, every time.” It anchors the structural end of the anchor points collection, supplies the A of the ABC system in the fall protection equipment guide, and belongs in the same plan as a harness from the ranked harness guide and the site-wide loadout in the construction PPE checklist.

Building the system on this anchor

Stay single-vendor if you like: the FallTech 8368 rope grab lanyard set and 7479 rope grab pair with any 5/8 in lifeline from the vertical lifelines guide, connect a shock lanyard from the ranked lanyard guide, or run an SRL from the SRL collection where clearance is tight. Hard-to-reach dorsal connections get a fix from the D-ring extenders guide, and every harness in the plan should carry trauma straps.

How the 7414 compares

Different surfaces, different anchors: shingled ridges take the Guardian RIDG-1 or Ridge-It, day work takes the Pitch Pro, concrete takes the Werner A510000, and steel you cannot drill takes a cross-arm strap or cable choker instead. The full field lives in the fall protection collection.

Safety note: a bolt-on plate is one component of a personal fall arrest system — in service it is only as strong as the bolts and the structural member they pass through, judged by a qualified person per FallTech’s instructions and OSHA 1926.502. Work in line below the ring, run the clearance math before selecting the connector, and retire every loaded component after an arrest.

Ordering FAQ

Is the FallTech 7414 in stock and ready to ship?
Yes — this listing is active and ships through Amazon. Open the linked listing for live price, availability, and delivery speed.

What is a bolt-on D-ring anchorage?
An anchor plate that bolts through a structural member — steel, engineered wood, or framing per the manufacturer’s instructions — and leaves a rated D-ring as the tie-off point. Where nails suit a shingled ridge, bolts suit structure you can through-fasten.

Is this for fall protection or cargo tie-down?
Fall protection. Tie-down and lashing D-rings are a different product class with different ratings — never mix the two directions. This page and its collection are personal fall arrest equipment.

How does the 7414 install?
Bolt it through the structural member following FallTech’s fastener and torque instructions. The rating in service depends on the bolts and the structure they pass through — a qualified person judges the substrate.

What connects to the D-ring?
Any rated connector: a shock-absorbing lanyard, an SRL, or a rope grab lanyard set. The fixed ring takes standard self-locking snap hooks and carabiners from the connectors collection.

Can the 7414 be a permanent anchor point?
Bolt-on anchorages are commonly installed as lasting tie-off points at recurring work positions — machine access, loading areas, mezzanines. Leave it installed and inspect it on the same schedule as the rest of your system.

Where do crews typically use bolt-on D-rings?
Recurring work-at-height positions where a rated tie-off should always exist: along mezzanines and platforms, at rooftop equipment, over loading positions — anywhere improvising an anchor would otherwise become routine.

How strong must the installed anchorage be?
OSHA 1926.502 requires 5,000 lb per attached worker, or an engineered system at a 2:1 safety factor designed by a qualified person. The plate is one link; the bolts and structure complete the chain.

How many workers per anchor?
One per anchor point unless FallTech’s instructions for your installed configuration state otherwise — the OSHA anchorage requirement applies per attached worker.

What inspection does a bolt-on anchor need?
Before each use: D-ring free of deformation, cracks, or heavy corrosion; bolts tight; no elongated holes or substrate damage. After arresting a fall, it retires with the loaded system components.

What’s the difference between this and a roof anchor?
Surface and fastening: roof anchors nail or clamp at a ridge for pitched-roof work; a bolt-on plate through-fastens to structure anywhere. Same OSHA anchorage rules, different install.

Does FallTech make the rest of the system?
Yes — FallTech rope grabs, lanyard sets, and SRLs are stocked here, so a single-vendor rig from anchor to harness connector is easy to assemble.

How do I reorder the 7414 for more positions?
Reorder from this page — the listing and its linked Amazon ASIN stay constant, so equipping every recurring work position takes minutes.

As an Amazon Associate, WC Safety earns from qualifying purchases. We stock this product; affiliate links do not affect the price you pay.