🔍 Click to zoom
Drager X-plore 8500 Short PAPR Hood
$101.00
Final price set by Amazon · may vary
Short answer: the drager x-plore 8500 short papr hood is covered below on the specifications its own listing publishes, the standards it is certified to, and who it suits. WC Safety Editorial Pick: The Drager X-plo...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
Short answer: the drager x-plore 8500 short papr hood is covered below on the specifications its own listing publishes, the standards it is certified to, and who it suits.
WC Safety Editorial Pick: The Drager X-plore 8500 Short Hood is the standard-fit headtop for the X-plore 8500 PAPR — the correct choice for average and shorter workers where the long hood provides more drape than needed.
The Drager X-plore 8500 Short Hood is the standard-length replacement hood for the X-plore 8500 PAPR system, designed for workers of average to shorter stature where the extended-length long hood would result in excess drape at the shoulders. The short hood connects directly to the X-plore 8500 blower via the Drager breathing hose and receives the system's 175 L/min airflow to maintain positive pressure within the hood. For most industrial applications and most workers, the short hood is the default hood selection before evaluating whether the long variant is needed.
The short hood provides full head, face, neck, and shoulder coverage using the same soft, lightweight fabric as the long variant — the coverage area is equivalent at the front and sides; the difference is in the additional back-and-shoulder length of the long version. In environments where workers are performing seated assembly, bench work, or upright tasks where bending or reaching overhead is minimal, the short hood provides complete coverage without the additional material of the long variant. This makes it the higher-comfort choice for tasks that don't create coverage gaps with standard-length hoods.
Facilities specifying Drager X-plore 8500 PAPR programs should keep both short and long hoods in inventory to accommodate the range of worker heights on their team. The correct approach is to fit each worker initially and determine which size maintains adequate neck and shoulder coverage during their specific work tasks. A proper PAPR hood should cover the neck completely and have the front panel resting on the upper chest, not the chin — if the chin is the lowest coverage point, the worker needs the long variant.
drager x-plore 8500 short papr hood — what the listing actually specifies
Key Features
An air-purifying respirator filters air, it does not supply any. Under 29 CFR 1910.134 no air-purifying respirator may be worn in an atmosphere that is IDLH or oxygen-deficient (below 19.5% oxygen). Those conditions require a supplied-air respirator or an SCBA, and no filter or cartridge rating changes that.
- Short (standard) variant — correct fit for average to shorter workers
- Compatible with Drager X-plore 8500 PAPR blower and breathing hose
- Soft fabric hood — lightweight, lower heat load than hard headtops
- Full head, face, neck, and shoulder coverage
- Wide-vision visor for unobstructed situational awareness
- Part of the Drager X-plore 8000 headtop family
Technical Specifications
| Spec | Value |
|---|---|
| Size/Variant | Short (standard length) |
| Compatible System | Drager X-plore 8500 PAPR |
| Hood Type | Soft fabric hood |
| Coverage | Head, face, neck, shoulders |
| Connection | Drager X-plore 8500 breathing hose |
Pros & Cons
✓ Pros
- Standard fit for most workers — the starting point for X-plore 8500 hood selection
- Lightweight and cool — lower heat load than hard headtop alternatives
- Wide visor — unobstructed field of vision
- Direct X-plore 8500 compatibility — factory-matched headtop
✗ Cons
- May leave coverage gaps for workers over ~6'0" — order long hood for tall workers
- Soft hood only — no head impact protection for impact hazard environments
Shop Compatible PAPR Equipment
- All Powered Air Purifying Respirators
- PAPR Replacement Filters
- 3M Versaflo S-433S-5 PAPR Hood Small/Medium
- 3M Versaflo S-133L-5 PAPR Hood 5-Pack
- 3M Versaflo TR-600-ECK Economy PAPR Starter Kit
- 3M Versaflo TR-300-HIK Heavy Industry PAPR Kit
- Allegro EZ Air Max PAPR
- Sundstrom SR 500/520 PAPR Kit
- RPB Z-Link Respirator with PX5 PAPR
- Full-Face Respirators
- Half-Face Respirators
- PAPR Cartridges
More from our PAPR Hood reviews
The trade-offs behind this choice are worked through in 3m 2091 vs 2097 filter, 3m 2091 vs honeywell north 7580p100, 3m 6000 vs 6500 respirator, 3m 6000 vs 6500 vs 7500 series half mask respirator compared, 3m 6001 vs 6003 cartridge.
The rest of the range sits in 3m 6000 series full face mask respirator, 3m 60921 vs 60923 vs 60926 respirator cartridges, 3m 7800 series full face mask respirator.
Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.
Further reading that bears directly on this choice: 3m 6003 vs honeywell north 7583p100l, 3m 60921 vs 60923 cartridge, 3m 60921 vs 60923 vs 60926 cartridge, 3m 60921 vs 60926 cartridge.
Alternatives at the same protection level are listed in 3m disposable respirators, 3m full face mask respirators.
Related standards and selection guidance: 3m 60921 vs honeywell north 7581p100l, 3m 60923 vs 60926 cartridge, 3m 60926 vs honeywell north 75scp100l, 3m 6500 vs 7500 respirator.
To see what else meets the same specification, start with 3m half mask respirators, 3m respirator filters and cartridges.
Brand / Vendor
Drager
Model / SKU
—
Product Type
PAPR Hood
Price
$101.00 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is the difference between the Drager X-plore 8500 Short Hood and Long Hood?
The short hood is the standard-length version for average to shorter workers. The long hood adds coverage at the back and shoulders for taller workers. Select based on worker height and whether shoulder coverage is maintained during work tasks.
Is the short hood the right choice for most workers?
For most workers of average height, the short hood provides complete coverage. Workers over approximately 6'0" may require the long hood to prevent coverage gaps at the shoulders during overhead or bending work.
Does the short hood work with the X-plore 8500 PAPR?
Yes. The Drager X-plore 8500 Short Hood is designed specifically for the X-plore 8500 PAPR blower and connects via the Drager breathing hose included in the X-plore 8500 kit.
Does the hood come with a breathing hose?
No. The breathing hose is included with the X-plore 8500 PAPR kit. The hood connects to the existing hose.
How do I know if I need the short or long hood for my workers?
Check that the hood's shoulder coverage rests on the upper chest (not just the chin). If workers report the hood riding up during overhead or bending work, the long hood is the correct size.
Is the short hood easy to put on and take off?
Yes. The soft fabric construction makes the short hood quick to don and doff. Disconnect the breathing hose, remove the hood, and store. Reconnect the hose when reusing.
How often should I replace the X-plore 8500 Short Hood?
Replace when visually contaminated, physically damaged, or per your facility's scheduled replacement program. In high-exposure environments, replace at shift end.
Can the short hood be used in pharmaceutical clean rooms?
Confirm the fabric's particle shedding characteristics with Drager against your cleanroom classification requirements before deploying in controlled environments.
Is the X-plore 8500 Short Hood NIOSH approved?
Yes. The short hood is part of the NIOSH-approved Drager X-plore 8500 PAPR system configuration.
Does the short hood have a wider visor than the long hood?
Both the short and long hoods feature the same wide-vision visor panel — the difference is solely in the overall hood length, not the visor size.
Can I use the short hood with the X-plore 8500 intrinsically safe PAPR variant?
Verify intrinsic safety hood compatibility directly with Drager for your specific Zone 1 or Zone 2 application.
What other PAPR headtops and hoods are available?
Browse our full selection of PAPR hoods and blower systems at Powered Air Purifying Respirators . Written by Steven Eaton , WC Safety — PPE Specialist with 10+ years sourcing and evaluating industrial respiratory protection. All specifications are manufacturer-verified or NIOSH-documented. Reviewed by: WC Safety Editorial | Buy Drager X-plore 8500 Short PAPR Hood on Amazon →