Ansell HyFlex 11-727 Gloves, A2 Cut-Resistant PU Palm

Ansell HyFlex 11-727 gloves — ANSI A2 Cut-Resistant Work Gloves

The Ansell HyFlex 11-727 gloves give your crew ANSI/ISEA 105 A2 cut resistance in a HyFlex 11-727 that pairs an ultralight nylon/spandex shell with a polyurethane palm. Before you order, read the full specification-based review or see how it stacks up in the cut-resistant gloves buyer’s guide.

New to cut ratings? The ANSI/ISEA 105 cut levels A1–A9 guide and our how to read an ANSI cut level reference explain exactly what an A2 cut resistant gloves rating like A2 stops — and what it does not.

Key features

• Breathable nylon/spandex shell
• ANSI/ISEA 105 A2 cut-resistant liner
• Sizes 6 (XS) through 11 (XXL)
• Built for machinery operation, auto mechanics, and warehousing
• Sold as PU palm cut resistant gloves for buyers cross-shopping that term

Pros & cons

Specifications

What the Ansell HyFlex 11-727 is for

Reach for the Ansell HyFlex 11-727 for machinery operation, auto mechanics, and warehousing. Browse the full cut-resistant gloves range, or the broader hand protection catalog, to line it up against alternatives. Not sure where to start? Our how to choose work gloves reference walks through the decision. Buyers also stock these alongside material-handling gloves and search them as nylon spandex work gloves.

Which size should you order?

Sizes 6 (XS) through 11 (XXL). Measure across your palm and check the glove size chart — a cut liner should fit snug so it does not bunch at the fingertips. The how to choose cut gloves by ANSI level walk-through helps you match both the size and the protection tier to your task.

How the Ansell HyFlex 11-727 compares

Weigh the Ansell HyFlex 11-727 against Ansell HyFlex 11-518, Ansell HyFlex 11-531, Ansell HyFlex 11-542. Need a higher tier? Step up through the A5 cut gloves or compare tiers in the A4 vs A5 guide. For impact as well as cut, see the impact-resistant gloves line. The best cut-resistant gloves guide ranks the full field so you can see where this pick lands.

Safety note: Cut and impact gloves reduce — but never eliminate — injury risk, and they are not rated against a chemical splash hazard, solvents, or live electrical work. Match the glove to a documented hazard assessment and replace any pair once the liner is nicked or worn through.

Ordering FAQ

What ANSI cut level is the Ansell HyFlex 11-727?
It carries an ANSI/ISEA 105 A2 cut rating. Cut ratings describe lab cut resistance, not a cut-proof guarantee.

Is the Ansell HyFlex 11-727 in stock and ready to ship?
This listing is active and ships through Amazon. Select your size to see live availability and shipping speed.

What size of the Ansell HyFlex 11-727 should I order?
Sizes 6 (XS) through 11 (XXL). Measure across your palm and use the glove size chart; a cut liner should fit snug, not loose.

Can I order the Ansell HyFlex 11-727 by the case?
Most sizes ship by the pair or by the box; bulk and case options appear on the linked Amazon listing for each size.

What tasks is the Ansell HyFlex 11-727 the right pick for?
It is built for machinery operation, auto mechanics, and warehousing. Match it to your hazard assessment before relying on it.

Does the Ansell HyFlex 11-727 work with touchscreens?
Touchscreen capability varies by size and coating; check the linked listing for the exact model you select.

How is the Ansell HyFlex 11-727 different from a disposable glove?
This is a reusable work glove with a knit or leather build, not a single-use disposable. It is washed and reused, not discarded after one task.

Is the Ansell HyFlex 11-727 heat-resistant?
No — it is not a heat glove. For hot surfaces, choose a dedicated heat-resistant glove.

Does the Ansell HyFlex 11-727 have impact protection?
No — it has no back-of-hand impact guards. For knuckle hazards, choose an impact-rated glove.

How do I reorder the Ansell HyFlex 11-727 later?
Reorder by the model number shown in the specifications above, or return to this page and select your size again.

Should I buy the Ansell HyFlex 11-727 or step up a cut tier?
If your task matches the rating, this is the right pick; if you handle thinner or sharper stock, step up a cut level.

Where can I read an independent review of the Ansell HyFlex 11-727?
See our full specification-based review, linked at the top of this page, for build notes, pros and cons, and how it compares to the rest of the lineup.

As an Amazon Associate, WC Safety earns from qualifying purchases. Affiliate links do not affect the price you pay.