🔍 Click to zoom
Ansell HyFlex 11-542 Gloves, A4 Cut & Heat-Resistant
$35.00
Final price set by Amazon · may vary
EDITORIAL PICK. Read our hands-on Ansell HyFlex 11-542 gloves review and see where the Ansell HyFlex 11-542 ranks in our cut-resistant gloves guide. Ansell HyFlex 11-542 gloves — ANSI A4 Cut-Resistant Work Gloves Th...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL PICK. Read our hands-on Ansell HyFlex 11-542 gloves review and see where the Ansell HyFlex 11-542 ranks in our cut-resistant gloves guide.
Ansell HyFlex 11-542 gloves — ANSI A4 Cut-Resistant Work Gloves
The Ansell HyFlex 11-542 gloves give your crew ANSI/ISEA 105 A4 cut resistance in a HyFlex 11-542 that pairs a Kevlar liner with a nitrile palm coating. Before you order, read the full specification-based review or see how it stacks up in the cut-resistant gloves buyer’s guide.
New to cut ratings? The ANSI/ISEA 105 cut levels A1–A9 guide and our how to read an ANSI cut level reference explain exactly what an heat and cut resistant gloves rating like A4 stops — and what it does not.
Key features
- Kevlar liner adds contact-heat resistance
- ANSI/ISEA 105 A4 cut-resistant liner
- Sizes 7 (S) through 11 (XXL)
- Built for machinery, EMS, and automotive tasks that mix sharp edges with warm surfaces
- Sold as A4 cut resistant gloves for buyers cross-shopping that term
Pros & cons
Pros
- Trusted Ansell build
- Kevlar liner adds contact-heat resistance
- Genuine ANSI A4 cut protection
- Sized to match the hand
Cons
- Cut protection is not cut-proof — no glove is
- Single material focus; pair with task-specific PPE for chemical or heat hazards
Specifications
| Brand | Ansell |
|---|---|
| Model | HyFlex 11-542 |
| ANSI/ISEA 105 cut level | A4 |
| Construction | A Kevlar liner with a nitrile palm coating |
| Color | Yellow/black |
| Sizing | Sizes 7 (S) through 11 (XXL) |
| Impact (ANSI/ISEA 138) | No |
| Heat resistance | Yes — contact heat |
| Use | Machinery, EMS, and automotive tasks that mix sharp edges with warm surfaces |
What the Ansell HyFlex 11-542 is for
Reach for the Ansell HyFlex 11-542 for machinery, EMS, and automotive tasks that mix sharp edges with warm surfaces. Browse the full cut-resistant gloves range, or the broader hand protection catalog, to line it up against alternatives. For warm surfaces, cross-check our heat-resistant gloves guide. Not sure where to start? Our how to choose work gloves reference walks through the decision. Buyers also stock these alongside material-handling gloves and search them as Kevlar work gloves.
Which size should you order?
Sizes 7 (S) through 11 (XXL). Measure across your palm and check the glove size chart — a cut liner should fit snug so it does not bunch at the fingertips. The how to choose cut gloves by ANSI level walk-through helps you match both the size and the protection tier to your task.
How the Ansell HyFlex 11-542 compares
Weigh the Ansell HyFlex 11-542 against Ansell HyFlex 11-518, Ansell HyFlex 11-531, Ansell HyFlex 11-561. Need a higher tier? Step up through the A5 cut gloves or compare tiers in the A4 vs A5 guide. For impact as well as cut, see the impact-resistant gloves line. The best cut-resistant gloves guide ranks the full field so you can see where this pick lands.
Safety note: Cut and impact gloves reduce — but never eliminate — injury risk, and they are not rated against a chemical splash hazard, solvents, or live electrical work. Match the glove to a documented hazard assessment and replace any pair once the liner is nicked or worn through.
Ordering FAQ
What ANSI cut level is the Ansell HyFlex 11-542?
It carries an ANSI/ISEA 105 A4 cut rating. Cut ratings describe lab cut resistance, not a cut-proof guarantee.
Is the Ansell HyFlex 11-542 in stock and ready to ship?
This listing is active and ships through Amazon. Select your size to see live availability and shipping speed.
What size of the Ansell HyFlex 11-542 should I order?
Sizes 7 (S) through 11 (XXL). Measure across your palm and use the glove size chart; a cut liner should fit snug, not loose.
Can I order the Ansell HyFlex 11-542 by the case?
Most sizes ship by the pair or by the box; bulk and case options appear on the linked Amazon listing for each size.
What tasks is the Ansell HyFlex 11-542 the right pick for?
It is built for machinery, EMS, and automotive tasks that mix sharp edges with warm surfaces. Match it to your hazard assessment before relying on it.
Does the Ansell HyFlex 11-542 work with touchscreens?
Touchscreen capability varies by size and coating; check the linked listing for the exact model you select.
How is the Ansell HyFlex 11-542 different from a disposable glove?
This is a reusable work glove with a knit or leather build, not a single-use disposable. It is washed and reused, not discarded after one task.
Is the Ansell HyFlex 11-542 heat-resistant?
Yes — the build adds contact-heat resistance, though it is not a primary heat glove.
Does the Ansell HyFlex 11-542 have impact protection?
No — it has no back-of-hand impact guards. For knuckle hazards, choose an impact-rated glove.
How do I reorder the Ansell HyFlex 11-542 later?
Reorder by the model number shown in the specifications above, or return to this page and select your size again.
Should I buy the Ansell HyFlex 11-542 or step up a cut tier?
If your task matches the rating, this is the right pick; if you handle thinner or sharper stock, step up a cut level.
Where can I read an independent review of the Ansell HyFlex 11-542?
See our full specification-based review, linked at the top of this page, for build notes, pros and cons, and how it compares to the rest of the lineup.
As an Amazon Associate, WC Safety earns from qualifying purchases. Affiliate links do not affect the price you pay.
By Steven Eaton, WC Safety Editorial — hand-protection desk. Cut levels and construction details are drawn from manufacturer data and the ANSI/ISEA 105 standard; we do not invent test results. See the EN 388 standard reference for the European cut/abrasion equivalents.
Brand / Vendor
Ansell
Model / SKU
11542
Product Type
Cut-Resistant Gloves
Price
$35.00 (Amazon)
Rating
4.12 / 5 — 8 reviews
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.1 / 5· 66 ratings on Amazon
★★★★★
More than tough enough
Super durable. If you’re on the fence on size, go up.
Verified Purchaser · June 3, 20 · ✓ Amazon Verified Purchase
★★★★★
Gloves for the shop
Excellent Purchase for me. Good quality and are holding up great. I purchased these about 6 months ago and still on my 1st set, and I wear them daily.
Verified Purchaser · July 10, 2 · ✓ Amazon Verified Purchase
★★★★★
Great protection! Nice fit for small hands.
These are great for my small women's hands. They protect my hands from getting damaged by roof shingles and sharp edges during construction.
Verified Purchaser · February 6 · ✓ Amazon Verified Purchase
★☆☆☆☆
Not very cut resistant
I got these because he uses his gloves all the time and the number 1 reason that they get destroyed is because they get cut up.This said heat and cut resistant so I thought that meant a little cut would not go through the glove, though for not cause them to get holes as fast, that wasn't the case.This is what looked like after a 12hr day. The thumb and forefinger are already torn through. The tip of the middle finger almost gone. I expected them to get rough looking, they're work gloves. It's how fast they started get torn up that I have a problem with.He does a lot of mechanical work and hauling.We've bought cheaper gloves that took a week before they got this bad.
Verified Purchaser · August 6, · ✓ Amazon Verified Purchase
★★★★★
Great
Love these for soldering
Verified Purchaser · February 1 · ✓ Amazon Verified Purchase
★★★☆☆
Not durable.
The metal strands that make it cut resistant break apart and poke your hands. I work with metal and at first I thought it was metal shavings in my gloves, turns out it IS the gloves. Also the heat resistant wears off pretty quickly with use. A little pricy for the durability overall.
Verified Purchaser · July 31, 2 · ✓ Amazon Verified Purchase
★★★★☆
Gloves
They’re not bad but don’t use them with any kind of metal products you are working with oil because it’s soaks right through.
Verified Purchaser · June 26, 2 · ✓ Amazon Verified Purchase
★★★★★
Awesome heat resistant gloves. Tight at first but break in nicely
$45 bucks for 3 pair but worth it. I’ve been using my first set of three for over a year and they’ve held up well.Cut as well as heat resistant I use them for tig welding as they give me more dexterity for handling smaller parts. The best part but Not in the product description, is you can wash these. I’ve literally washed them while wearing them using dish soap to degrease and hang dry. Having more than one pair is convenient while one set is being washed/drying.
Verified Purchaser · August 26, · ✓ Amazon Verified Purchase
Showing 8 of 66 Amazon reviews.
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.