47.7in W Deep 5 Tier Heavy Duty Garage Shelving, Adjustable Metal Rack Storage Shelves

What to check before you buy

Capacity per shelf level

Shelving is rated per level with an evenly distributed load, not as one total. Stacking everything heavy on one beam is the usual cause of failure.

Anchoring and tip-over

Tall, narrow units need to be anchored to the wall or floor. Height-to-depth ratio is what drives tip-over risk, and loading the top levels first makes it worse.

Decking type

Wire decking allows sprinkler flow through the rack and does not trap debris; solid decking supports small items but can obstruct overhead sprinklers.

Damage inspection

Bent uprights and deformed beams have lost capacity that cannot be judged by eye. Damaged rack components are replaced, not straightened.

How it compares to other shelving and storage racks we review

List prices recorded when this page was last updated; Amazon pricing moves frequently, so check the live listing. Browse the full shelving and storage racks range, or see all jobsite equipment.

Frequently asked questions

How much weight can a shelf hold?

Manufacturers rate shelving per level, assuming the load is spread evenly across the beam. Concentrated loads at the center of a beam impose far higher stress than the rating implies.

Does shelving need to be anchored?

Tall or narrow units generally do. Anchoring is what prevents tip-over when a unit is loaded unevenly or when someone climbs it, and manufacturers specify it in the assembly instructions.

Can I climb my storage racks?

No. Racking is not designed or rated as a ladder or work platform, and climbing is a common source of both falls and rack damage. Use a proper ladder or order picker.

What is the difference between boltless and bolted shelving?

Boltless (rivet) shelving assembles faster and adjusts easily, suiting light and medium duty. Bolted structural shelving takes higher loads and abuse but is slower to reconfigure.

When should damaged racking be taken out of service?

As soon as an upright, beam or brace is bent, cracked, or has been struck. Deformation means the component no longer carries its rated load, and repair by straightening is not acceptable.

Where do the specifications on this page come from?

They are taken from the manufacturer's published listing. WC Safety does not laboratory-test products, and nothing is claimed here that the manufacturer does not state.

Does WC Safety sell this product?

No. WC Safety is an independent review site and an Amazon Associate. Purchases happen on Amazon, and we earn a commission on qualifying purchases at no extra cost to you.

How was the rating on this page determined?

The score shown is the live Amazon customer rating captured at the time of review. It reflects buyer feedback, not a WC Safety test result.