3M DBI-SALA Rope Lifeline β 30 ft 5/8 in with Self-Locking Snap Hook
EDITORIAL PICK. Featured in our best vertical lifelines & rope grabs guide β compare it across the vertical lifelines & rope grabs collection. The DBI-SALA rope lifeline β 30 ft, self-locking hook A rope lif...
Check Price on Amazonπ Amazon Associate Β· You pay the same price Β· We earn a small commission
The DBI-SALA rope lifeline β 30 ft, self-locking hook
A rope lifeline is the vertical line a rope grab rides on, and the 3M DBI-SALA version brings two things the budget ropes do not: a self-locking snap hook that cannot roll open under load, and an integral i-Safe RFID tag that stores this ropeβs inspection history. It is a 30 ft, 5/8 inch polyester/polypropylene blend line, taped at the trailing end, built for a rope-grab fall arrest system. Clip the self-locking hook to a rated anchor or tie-off adaptor, add your own 5/8 inch rope grab and a harness, and you have a vertical fall arrest connection with a paper trail.
Shoppers searching a 5/8 rope lifeline or a rope lifeline with snap hook for a rope-grab system land here; as a bare fall arrest rope rather than a bundled kit, you pick the grab that suits your work. Just match the grab to the 5/8 inch diameter, covered below.
Key features
- 30 ft (9 m) 5/8 in polyester/polypropylene blend rope lifeline
- Self-locking snap hook at one end; taped trailing end
- Integral i-Safe RFID tag for electronic inspection records
- Blended rope for added abrasion and UV resistance; unique splice terminations
- 3M DBI-SALA (Capital Safety) β industrial/occupational use only
Pros & cons
- Self-locking hook resists roll-out
- i-Safe RFID tag tracks inspection history
- Blended rope with abrasion and UV resistance
- Rope only β no grab or shock absorber included
- Fixed 30 ft length; grab must fit 5/8 inch rope
Specifications
| Type | Vertical rope lifeline (bare) |
|---|---|
| Rope | 5/8 in (16 mm) polyester/polypropylene blend |
| Length | 30 ft (9 m), fixed |
| Ends | Self-locking snap hook + taped trailing end |
| Brand / SKU | 3M DBI-SALA / 3DSVRL-30 β i-Safe RFID |
What this rope lifeline is for
Rope-grab fall arrest at moderate heights where the crew already owns a 5/8 inch grab β pitched-roof work, tower and structure descent, any vertical-movement job where the line carries the grab. It sits in the vertical lifelines & rope grabs collection, serves the connector side of the ABC system explained in the fall protection equipment guide and the ABCDs of fall protection, and applies wherever a fall hazard triggers the rules in when is fall protection required.
Building the system on this lifeline
The self-locking hook connects to a rated anchor from the anchor points collection β the ranked options are in the best roof anchors guide β sized to the anchor strength requirements. Add a 5/8 inch rope grab β the Guardian 01503 rope grab or the FallTech 7479 self-tracking grab from the rope grabs guide β and a harness from the full body harnesses collection, with a rated connector. Inspect the harness to the harness inspection checklist and fit a suspension trauma strap for the rescue plan.
How this DBI-SALA lifeline compares
The Guardian VL58 and Peakworks Standard are lower-cost bare ropes with standard snap hooks; the Peakworks Premium adds a wide length range. The Guardian VLA ships the rope already paired with a matched grab and shock absorber β buy that if you do not own a grab β and the KwikSafety Tsunami is a further option. As a DBI-SALA vertical lifeline, this earns its place on the self-locking hook and the i-Safe inspection tag. Where clearance runs short, a self-retracting lifeline replaces the whole rope-and-grab setup β see the best self-retracting lifelines guide and the trade-offs in shock-absorbing lanyard vs SRL. For a ready-to-work bundle, see the best fall protection kits. Everything lives in the fall protection collection.
Safety note: a bare rope lifeline is only one component β it does not arrest a fall on its own. It needs a rated anchor, a rope grab matched to the 5/8 inch diameter, and a full body harness to form a compliant personal fall arrest system under OSHA 1926.502. Run the clearance math for the 30 ft length, work in line below the anchor to avoid a swing fall, and retire the rope if the sheath is cut or the core is exposed.
Ordering FAQ
Is the 3M DBI-SALA rope lifeline in stock and ready to ship?
Yes β this listing is active and ships through Amazon. The linked Amazon listing carries live price and delivery.
Does this lifeline include a rope grab?
No β it is the bare rope lifeline only, with a self-locking snap hook at one end and a taped end at the other. It is the line a rope grab rides on; you add a grab rated for 5/8 inch rope plus your harness.
How long is it?
30 ft (9 m). It is a fixed cut length, sized for single-story and moderate-height work where 30 ft reaches from the anchor to your lowest work position with margin.
What is the self-locking snap hook?
A snap hook whose gate locks automatically when released, so it cannot roll open or unclip under load without a deliberate two-action release. It connects the top of the lifeline to your anchor or a tie-off adaptor.
What is the i-Safe RFID tag for?
An integral RFID identification tag that lets you log and store inspection records electronically against this specific lifeline, so its service history travels with the rope.
What is the rope made of?
A 5/8 inch (16 mm) polyester/polypropylene blend. The blend adds abrasion and UV resistance for durability, and 3M uses unique splice terminations for extra strength at the ends.
What rope grab fits this lifeline?
A rope grab rated for 5/8 inch rope, the lineβs nominal diameter. Match the grab to the rope diameter exactly β a grab sized for a different rope may not lock reliably. Compatible grabs are in the collection.
Is this DBI-SALA lifeline OSHA compliant?
As one component it forms a compliant rig when paired with a rated anchor, a matched rope grab, and a full body harness under OSHA 1926.502. 3M labels the lifeline for industrial and occupational use only.
Can I use it for climbing or recreation?
No β 3M labels this an industrial/occupational fall-protection product only. It is not intended, labeled, or packaged for recreational, sporting, or consumer use.
How does the lifeline work in a fall?
It hangs vertically from the anchor; your rope grab rides it and locks onto the line when it senses a fall. The rope itself does not stretch to absorb force β that is the job of the grabβs or lanyardβs shock element.
How do I inspect the lifeline before use?
Run the full length through a gloved hand for cuts, fraying, glazing, and chemical damage; check the self-locking hook gate and the spliced terminations, and log the check against the i-Safe tag. Retire the rope if the sheath is cut or the core is exposed.
How do I reorder for a crew?
Reorder from this page β the linked Amazon listing makes equipping each additional worker with their own lifeline quick.
As an Amazon Associate, WC Safety earns from qualifying purchases. We stock this product; affiliate links do not affect the price you pay.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.