🔍 Click to zoom
BULANGDI Lockout Hasp 10-Pack — Red Aluminum, 1.5" Extended Jaw
$36.99
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.4/5 — WC Safety Review of the BULANGDI lockout hasp 10-pack, red aluminum with 1.5-inch extended jaws for group LOTO. Editorial assessment by Steven Eaton, WC Safety editor, based on the publishe...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.4/5 — WC Safety Review of the BULANGDI lockout hasp 10-pack, red aluminum with 1.5-inch extended jaws for group LOTO.
Editorial assessment by Steven Eaton, WC Safety editor, based on the published BULANGDI listing and category fit. We did not laboratory-test this product.
Editorial assessment by Steven Eaton, WC Safety editor, based on the published BULANGDI listing and category fit. We did not laboratory-test this product.
The BULANGDI lockout hasp 10-pack is the hardware behind lockout/tagout's most important sentence: nobody's lock comes off but their own. Clamp the extended 1.5-inch jaw on the isolation point, and every worker on the job hangs a personal padlock through the hasp — the machine stays dead until the last lock leaves. Ten hasps stock a facility's lockout points in one order.
CHECK PRICE ON AMAZON → SHOP LOCKOUT HASPS →
As an Amazon Associate, WC Safety earns from qualifying purchases.
What a lockout hasp actually does
Group maintenance breaks single-lock lockout: one padlock on the disconnect protects one worker, and everyone else is trusting somebody else's lock. The hasp fixes the arithmetic — it clamps the energy point once and offers a hole for every worker's personal padlock, so each person's protection is under each person's key. That's not convenience hardware; it's the mechanism OSHA 29 CFR 1910.147 group-lockout provisions are built around, and it's why a loto hasp hangs at every serious lockout station. The complete LOTO guide walks the whole program; the step-by-step reference covers execution.
Safety first: hardware doesn't make a LOTO program — the written energy-control procedure, training, verification of zero energy, and annual audits do, per OSHA 29 CFR 1910.147. A hasp on a valve feeding a line that could release stored pressure or a chemical splash hazard still demands the full isolation-and-verify sequence before anyone works. One lock per worker, no exceptions, and nobody removes a lock that isn't theirs.
What the listing documents
From the listing: red aluminum lockout hasps with a 1.5-inch extended jaw; a 10-pack; part of a lockout/tagout energy-control program per OSHA 1910.147. The extended jaw is the working feature — valve handles, thick disconnect levers, and awkward isolation geometry defeat compact jaws, and a hasp that doesn't fit the point doesn't protect anyone. As a lockout tagout hasp for mixed facilities, extended-jaw is the safer default spec.
Picking inside the hasp shelf
Format and material split the shelf: this red aluminum 10-pack is the stock-the-station play, the BULANGDI stainless 1-inch version trades jaw reach for corrosion-proof steel, the WUWEOT stainless 1.5-inch 8-pack is the heavy duty lockout hasp alternative, and the Bozzys 6-hole steel anchors dedicated group-lockout duty. All of them hold the locks; none of them replace the personal padlocks — keyed-different sets like the ABUS 74/40 10-pack or TradeSafe reds pair one lock to one worker.
Building the full LOTO station
Hasps are one drawer of the station: do-not-operate tags identify whose lock is whose, cable lockouts wrap valve clusters no hasp reaches, plug lockouts handle cord-powered equipment, and station boards keep it all visible and auditable. Starting from zero, the kit roundup bundles the first order, the padlock roundup covers the locks, and the lockout-vs-tagout reference and LOTO explainer ground the program. Electrical isolation work — LOTO's most common home — also pairs with rated head protection: the electrical hard hat picks and the Class E vs Class G comparison cover the dielectric side of the same maintenance jobs.
Ownership and program fit
Inspect jaw action and lock holes before each use and retire any hasp with a bent jaw or cracked hole — hasps are cheap and failures aren't. Store them at the lockout station so the procedure never stalls hunting hardware, keep the red color scheme consistent so stray non-LOTO locks stand out, and audit counts annually alongside the written procedure per the padlock selection reference and the wider LOTO collection. For facility-scale orders, quantity purchasing runs through a free Amazon Business account — the walkthrough is linked in our footer.
Frequently asked questions
What is a lockout hasp for?
Multi-worker lockout on a single energy point: the hasp clamps the isolation device, and every worker adds a personal padlock through the hasp's holes. The equipment can't re-energize until the last lock comes off — each worker controls their own protection, which is the core of OSHA's group lockout rules.
What does the 1.5-inch extended jaw do?
Reach. Valve handles, thick disconnect levers, and awkward isolation points defeat standard-jaw hasps; the extended 1.5-inch jaw wraps geometry a compact jaw can't. If your plant's lockout points are mixed, extended jaws are the safer default.
Why a 10-pack?
Because lockout points multiply: every machine, panel, and valve in the energy-control procedure needs a hasp available when maintenance starts. A 10-pack stocks the lockout station so the procedure never stalls on missing hardware.
How many padlocks fit one hasp?
Standard hasps carry multiple lock holes — typically six. Larger crews chain hasps: the last hole of the first hasp holds a second hasp, extending capacity without changing the one-lock-per-worker rule.
Aluminum or steel hasp — which should I buy?
Aluminum is lighter, non-rusting, and spark-conscious; steel takes more abuse in heavy industrial service. For most facility LOTO programs the aluminum tier serves well; pick steel where hasps live outdoors or get dropped daily.
Does a hasp replace lockout padlocks?
No — it multiplies them. Each worker still needs a personal, uniquely-keyed lockout padlock; the hasp is the manifold that lets all those locks control one point. Pair the pack with keyed-different padlocks assigned per worker.
Is the red color meaningful?
Red is the conventional lockout color — it signals safety hardware at a glance and matches most programs' padlock color coding. Consistent color makes an unauthorized lock or a stray non-LOTO padlock stand out immediately.
What does OSHA require for group lockout?
29 CFR 1910.147 requires each authorized employee to affix a personal lockout device during group work — exactly what a hasp enables. The written energy-control procedure, training, and annual audits are the program around the hardware.
Can I use these for tagout-only points?
Hasps are lockout hardware. Where equipment genuinely can't accept a lock, OSHA's tagout provisions apply with extra requirements — but if a hasp can clamp the point, lockout beats tagout every time. Our lockout-vs-tagout reference covers the line.
How do I inspect and maintain hasps?
Check jaw action and lock holes before each use — a bent jaw or cracked hole retires the hasp on the spot. Aluminum resists corrosion, so cleaning is a wipe-down; store them at the lockout station, not in toolboxes.
What else completes a LOTO station?
Padlocks (keyed different, per worker), do-not-operate tags, cable lockouts for valve clusters, plug lockouts for cord-powered gear, and a station board that keeps it all auditable. Kits bundle the starting set.
How do I order for a full facility?
Quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Brand / Vendor
BULANGDI
Model / SKU
—
Product Type
Lockout Hasp
Price
$36.99 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.
Frequently Asked Questions
What is a lockout hasp for?
Multi-worker lockout on a single energy point: the hasp clamps the isolation device, and every worker adds a personal padlock through the hasp's holes. The equipment can't re-energize until the last lock comes off — each worker controls their own protection, which is the core of OSHA's group lockout rules.
What does the 1.5-inch extended jaw do?
Reach. Valve handles, thick disconnect levers, and awkward isolation points defeat standard-jaw hasps; the extended 1.5-inch jaw wraps geometry a compact jaw can't. If your plant's lockout points are mixed, extended jaws are the safer default.
Why a 10-pack?
Because lockout points multiply: every machine, panel, and valve in the energy-control procedure needs a hasp available when maintenance starts. A 10-pack stocks the lockout station so the procedure never stalls on missing hardware.
How many padlocks fit one hasp?
Standard hasps carry multiple lock holes — typically six. Larger crews chain hasps: the last hole of the first hasp holds a second hasp, extending capacity without changing the one-lock-per-worker rule.
Aluminum or steel hasp — which should I buy?
Aluminum is lighter, non-rusting, and spark-conscious; steel takes more abuse in heavy industrial service. For most facility LOTO programs the aluminum tier serves well; pick steel where hasps live outdoors or get dropped daily.
Does a hasp replace lockout padlocks?
No — it multiplies them. Each worker still needs a personal, uniquely-keyed lockout padlock; the hasp is the manifold that lets all those locks control one point. Pair the pack with keyed-different padlocks assigned per worker.
Is the red color meaningful?
Red is the conventional lockout color — it signals safety hardware at a glance and matches most programs' padlock color coding. Consistent color makes an unauthorized lock or a stray non-LOTO padlock stand out immediately.
What does OSHA require for group lockout?
29 CFR 1910.147 requires each authorized employee to affix a personal lockout device during group work — exactly what a hasp enables. The written energy-control procedure, training, and annual audits are the program around the hardware.
Can I use these for tagout-only points?
Hasps are lockout hardware. Where equipment genuinely can't accept a lock, OSHA's tagout provisions apply with extra requirements — but if a hasp can clamp the point, lockout beats tagout every time. Our lockout-vs-tagout reference covers the line.
How do I inspect and maintain hasps?
Check jaw action and lock holes before each use — a bent jaw or cracked hole retires the hasp on the spot. Aluminum resists corrosion, so cleaning is a wipe-down; store them at the lockout station, not in toolboxes.
What else completes a LOTO station?
Padlocks (keyed different, per worker), do-not-operate tags, cable lockouts for valve clusters, plug lockouts for cord-powered gear, and a station board that keeps it all auditable. Kits bundle the starting set.
How do I order for a full facility?
Quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.