ABUS 74/40 Lockout Tagout Padlocks, 10-Pack Keyed Different — Non-Conductive Safety Lockout Padlock
$70.99
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 WC Safety Review — ABUS 74/40 Lockout Tagout Padlocks — 10-Pack Keyed Different Editorial assessment by Steven Eaton, WC Safety editor, based on published ABUS specifications and category f...
Key Features
- Padlocks, Lockout/Tagout & Security Equipment
- Included components: Unit
- Instruction Guide
🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5 WC Safety Review — ABUS 74/40 Lockout Tagout Padlocks — 10-Pack Keyed Different
Editorial assessment by Steven Eaton, WC Safety editor, based on published ABUS specifications and category fit. We did not laboratory-test this product.
CHECK PRICE ON AMAZON →SHOP LOCKOUT/TAGOUT →
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
ABUS 74/40 Lockout Tagout Padlocks, 10-Pack Keyed Different — Non-Conductive Safety Lockout Padlock Overview
The ABUS 74/40 lockout tagout padlocks are sold here as a 10-pack keyed different — each of the ten locks carries its own unique key, with no key crossover inside the set. Under OSHA 29 CFR 1910.147 (The Control of Hazardous Energy), each authorized worker must apply their own lock and tag to the energy-isolating device and retain sole control of the key. A keyed-different pack supports that one-worker-one-lock-one-key model directly, which is why it is a staple of lockout tagout programs.
The 74/40 body is a non-conductive thermoplastic, a property crews favor for electrical isolation work where a conductive padlock body is undesirable. The 1-inch (25 mm) shackle passes through breaker cleats, disconnect hasps, and valve handles to hold them in the de-energized position. For points that need several workers to lock the same device, pair these padlocks with lockout hasps so each person hangs an individual lock; add lockout tagout tags to identify the lock owner and the reason for the lockout.
Buyers stocking a full energy-control program typically build out from lockout padlocks across all lockout tagout categories — cable lockouts for awkward multi-point isolation, plug lockouts for cord-and-plug equipment, and lockout stations to organize and dispense the locks at the point of use. The 10-pack format keeps per-lock cost low when you need to issue personal locks to a whole crew at once.
What It Is Built For
| Use case | Fit | Buyer guidance |
|---|---|---|
| Issuing personal locks to a crew | Excellent | Keyed different means each of the 10 locks has its own unique key — assign one lock per authorized worker for 1910.147 compliance. |
| Electrical breaker / disconnect lockout | Excellent | Non-conductive thermoplastic body is the common choice for electrical isolation; 1-inch shackle fits standard breaker cleats and disconnect hasps. |
| Group lockout on a single device | Good | Works through a lockout hasp so multiple workers can each apply their own lock to the same isolation point. |
| Valve / fluid-line isolation | Good | 1-inch shackle passes through most valve-handle lockouts; confirm your valve cover accepts a 25 mm shackle. |
| Single keyed-alike master setup | Not suited | This pack is keyed different (every lock a separate key); choose a keyed-alike padlock if one supervisor key must open every lock. |
| High-security / forced-entry resistance | Limited | Lockout padlocks are warning devices for energy control, not anti-theft hardware — do not rely on them as security locks. |
Lockout/tagout devices are part of an OSHA 29 CFR 1910.147 energy-control program. A lock isolates hazardous energy (electrical, hydraulic, pneumatic, mechanical) so equipment cannot be re-energized during service. Each authorized worker applies their own keyed-different lock and a tag; never share or remove another worker's lock. The hardware is only as good as the written procedure, training, and verification of zero energy behind it. Browse lockout/tagout devices.
Pros & Cons
Pros
- 10 padlocks per pack — equips a full crew with personal locks at low per-lock cost
- Keyed different: every lock opens with its own unique key, matching one-worker-one-lock-one-key procedure
- Non-conductive thermoplastic body suited to electrical isolation work
- 1-inch (25 mm) shackle fits common breaker cleats, disconnect hasps, and valve lockouts
- ABUS-built lockout padlock from an established LOTO hardware maker
- Each worker keeps sole control of their key for 1910.147 compliance
Cons
- Keyed different is not for setups that need one supervisor key to open every lock — choose keyed alike instead
- Not a security/anti-theft lock; it is an energy-control warning device only
- Single device shared by many workers still needs a separate lockout hasp
- Identification of lock owner requires separate lockout tags
How It Compares
How the ABUS 74/40 10-pack compares to sibling lockout padlocks in the WC Safety lockout tagout range:
| Model | Pack & keying | Shackle | Best for |
|---|---|---|---|
| ABUS 74/40 (this product) | 10-pack, keyed different | 1 in (25 mm), non-conductive body | Issuing personal locks to a whole crew |
| ABUS 2ALHB/40-75 | Single, keyed alike | Long shackle (75 mm) | Tall cleats / deep hasps where one key opens matched locks |
| American Lock A1107R | Single safety padlock, red | Standard shackle | Individual high-visibility personal lock |
| Brady SafeKey (ALU series) | Single, keyed different | 1 in (25 mm), aluminum body | Color-coded single locks where a metal body is acceptable |
Round out the program with lockout hasps for group lockout, cable lockouts and plug lockouts for non-standard isolation points, lockout tagout tags for owner identification, and a lockout stations board to dispense everything at the point of use.
Specifications
| Brand | ABUS |
| Model | 74/40 |
| Pack quantity | 10 padlocks |
| Keying | Keyed different (unique key per lock) |
| Body material | Non-conductive thermoplastic |
| Shackle clearance | 1 in (25 mm) |
| Device type | Safety lockout padlock |
| Intended use | OSHA 29 CFR 1910.147 energy isolation |
| ASIN | B0CZ7L1FG4 |
Related Resources
lockout tagout lockout padlocks lockout hasps cable lockouts lockout stations lockout tagout tags plug lockouts
Frequently Asked Questions
Is the ABUS 74/40 10-pack keyed alike or keyed different?
This pack is keyed different — each of the ten padlocks opens with its own unique key, and no two locks share a key. That fits the OSHA 1910.147 model where each worker controls a single personal lock. If you need one key to open every lock, choose a keyed-alike option from our lockout padlocks range instead.
Why would I want keyed-different locks instead of keyed alike?
Keyed different enforces individual accountability: each authorized worker keeps the only key to their own lock, so no one else can remove it. This is the standard arrangement for personal lockout under 1910.147. Keyed alike is used when a single supervisor key needs to open a matched set.
How many locks are in the pack?
Ten padlocks. The 10-pack format is built for equipping a full crew with personal locks at once, which lowers the per-lock cost compared with buying single locks. Browse single units under lockout padlocks if you need fewer.
Is the 74/40 body non-conductive?
Yes — the 74/40 uses a non-conductive thermoplastic body, which is the common choice for electrical isolation work where a conductive padlock body is undesirable. Confirm your facility's electrical safety procedures for the specific application.
What size is the shackle?
The 74/40 has a 1-inch (25 mm) shackle clearance, which fits common breaker cleats, disconnect hasps, and many valve-handle lockouts. Verify the opening on your specific energy-isolating device or lockout hasps accept a 25 mm shackle.
Does this meet OSHA lockout tagout requirements?
OSHA 29 CFR 1910.147 requires that each worker apply their own lock and tag to the energy-isolating device and keep sole control of the key. A keyed-different padlock supports that procedure. Compliance also depends on your written energy-control program, training, and using the lock with proper lockout tagout tags.
Can several workers lock out the same machine?
Yes — when more than one person services a single device, run each individual lock through a lockout hasp so every worker applies and removes their own lock. The machine stays isolated until the last lock is removed.
What is the difference between this and the ABUS 2ALHB/40-75?
The 74/40 here is a 10-pack of keyed-different locks with a standard 1-inch shackle and non-conductive body. The 2ALHB/40-75 is a single keyed-alike lock with a long 75 mm shackle for deeper cleats. Compare both within our lockout padlocks collection by keying and shackle length.
Can I use these for cord-and-plug equipment?
The padlock secures the isolation device, but cord-and-plug equipment is best isolated with a dedicated enclosure. Pair the 74/40 with plug lockouts so the plug cannot be reinserted while the lock is applied.
Do the locks come with tags?
Tags are not included with the padlocks. Under 1910.147 each lock should carry a tag identifying the lock owner and the reason for the lockout — add lockout tagout tags to complete each worker's kit.
How should I store and dispense ten locks?
A wall-mounted board keeps locks, keys, and tags organized at the point of use and makes it obvious which locks are issued. See our lockout stations to dispense the 10-pack and keep the rest of your lockout tagout devices in one place.
Is a lockout padlock a security lock?
No. Lockout padlocks are energy-control warning devices, not anti-theft hardware — they hold an isolation point in the safe position and signal that a worker is servicing the equipment. Do not rely on them for forced-entry security. For full program setup, build out from lockout padlocks and the broader lockout tagout range.
Written by Steven Eaton, WC Safety Editorial. Specifications sourced from ABUS published data. Compare the range in lockout/tagout.
WC Safety is an independent PPE review site and Amazon Associate; no paid placement. Match the product to your specific hazard and follow your site PPE program.
Brand / Vendor
ABUS
Model / SKU
74/40
Product Type
Lockout Padlock
Condition
New
MPN
74/40
Price
$70.99 (Amazon)
Rating
4.0 / 5 — 1 reviews
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
★★★★☆4.0 / 5· 1 Amazon customer review
★★★★☆
4.0 out of 5 stars
One of the locks I later found wasn't working with what I thought was the matching key (color-coded would've been nicer!) but it's possible I mixed things up so I'm deducting only 1 star instead of 2 here. Very functional overall still!
Anonymous · 2026-04-30 · ✓ Verified Buyer
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.