SafeWaze FS88760-FF 6 ft Shock Absorbing Lanyard — 12 ft Free Fall Rated

The 6 ft shock absorbing lanyard for a 12 ft free fall — SafeWaze FS88760-FF

Most lanyards assume an overhead anchor and a 6 ft free fall, but the SafeWaze FS88760-FF is a 6 ft shock absorbing lanyard rated for a 12 ft free fall — twice the standard. That rating is the whole point: when you can only tie off at foot level or below your harness D-ring, you fall further before the lanyard arrests you, and the extra fall energy needs a lanyard built for it. It is a single-leg, fixed-length, polyester energy-absorbing lanyard weighing about 3 lb, backed by a 12-month warranty.

Shoppers searching a free fall lanyard, a 12 ft free fall lanyard, or a general energy absorbing lanyard for foot-level anchoring land here; as a fall arrest lanyard it is the connecting device between your harness and anchor. Because the free fall is larger, the clearance math matters even more — covered below.

Key features

• 6 ft fixed-length energy-absorbing (shock-absorbing) lanyard
• Rated for a 12 ft free fall — twice the standard 6 ft
• Single leg; polyester construction; about 3 lb
• Built for foot-level and below-D-ring anchor tie-off
• 12-month manufacturer warranty
• SafeWaze — a connecting device for personal fall arrest

Pros & cons

Specifications

What the FS88760-FF is for

Fall arrest where you cannot anchor overhead and free fall can reach 12 ft — foot-level tie-off on structural steel and similar work. It sits in the lanyards collection, is the connector in the ABC system explained in the fall protection equipment guide and the ABCDs of fall protection, and applies wherever a fall hazard triggers the rules in when is fall protection required.

Building the system around the lanyard

Attach one end to the back D-ring of a harness from the full body harnesses collection — ranked in the best safety harness guide — and the other to an anchor from the anchor points collection, sized to the anchor strength requirements and ranked in the best roof anchors guide, with a rated carabiner if needed. Inspect the harness to the harness inspection checklist, and fit a suspension trauma strap for the rescue plan.

How the FS88760-FF compares

Need to vary the length? The SafeWaze FS560-AJ adjusts from 4 to 6 ft for standard overhead anchoring. For continuous tie-off past anchors, a twin-leg shock-absorbing lanyard keeps you connected while you move. Where clearance is tight, a self-retracting lifeline arrests faster and shorter — see the best self-retracting lifelines guide and the trade-offs in shock-absorbing lanyard vs SRL. Browse alternatives in the lanyards & lifelines collection, or build a complete rig from the best fall protection kits. Everything lives in the fall protection collection.

Safety note: a lanyard is one part of a personal fall arrest system — it works only with a rated full body harness and a rated anchor, under OSHA 1926.502. A 12 ft free fall rating does not shorten your required clearance — it means the opposite: a foot-level anchor produces a longer fall, so you need more clear space below you, not less. Run the full clearance calculation for your anchor position and the shock pack's deployment distance, verify the rated capacity on the label, connect only to the harness back D-ring for fall arrest, and retire the lanyard after any fall or a deployed pack.

Ordering FAQ

Is the SafeWaze FS88760-FF lanyard in stock and ready to ship?
Yes — this listing is active and ships through Amazon. The linked Amazon listing carries live price and delivery.

What does the 12 ft free fall rating mean?
It is rated for a free fall of up to 12 ft, twice the standard 6 ft. That matters when your anchor is at foot level or otherwise below your harness D-ring, because you can fall further before the lanyard begins to arrest you.

Why would I need a 12 ft free fall lanyard?
When you cannot anchor overhead — for example a foot-level tie-off on structural steel — your free fall is longer. A lanyard rated for that longer free fall is designed to handle the extra energy of the fall. Confirm the application against the manufacturer instructions.

How long is it?
6 ft. It is a fixed-length energy-absorbing lanyard, not adjustable; if you need to vary the length, choose an adjustable lanyard instead.

Is it a single-leg or twin-leg lanyard?
Single leg — one lanyard. For continuous 100 percent tie-off while moving past anchors, you need a twin-leg lanyard instead.

What is it made of and how much does it weigh?
Polyester construction, about 3 lb. It carries a 12-month manufacturer warranty.

How does the energy absorber work?
The shock-absorbing element extends in a controlled way during a fall to limit the force transmitted to your body. Once it has deployed, the lanyard must be removed from service.

What is the weight capacity?
Check the manufacturer listing and label for the rated capacity and connector details before use, and confirm they suit your worker weight plus tools. Do not exceed the labeled rating.

What does it connect to?
As a connecting device, one end attaches to your harness back D-ring and the other to a rated anchor or anchor connector. Confirm the end connectors match your harness and anchor points.

Is the FS88760-FF OSHA compliant?
As the connecting device in a fall arrest rig, it works within a compliant setup when paired with a rated full body harness and anchor under OSHA 1926.502 — and the larger free fall makes the fall-clearance calculation especially important.

How do I inspect it before use?
Check the webbing for cuts, fraying, burns, and chemical damage; the stitching for pulled threads; the end connectors for function; and the shock pack for signs of deployment. Retire it after any fall or a deployed pack.

How do I reorder for a crew?
Reorder from this page — the linked Amazon listing makes equipping each worker quick.

As an Amazon Associate, WC Safety earns from qualifying purchases. We stock this product; affiliate links do not affect the price you pay.