Skip to content
Industrial Safety Equipment & PPE β€” ANSI/OSHA Compliant
Industrial Safety Equipment & PPE β€” ANSI/OSHA Compliant
Home β€Ί Lanyards β€Ί FallTech 8260YLE Leading Edge Lanyard β€” Dual Cl...

FallTech 8260YLE Leading Edge Lanyard β€” Dual Class Y-Leg, Rebar Hooks

FallTech Lanyard
$298.25
Final price set by Amazon Β· may vary

EDITORIAL PICK. Featured in our best fall protection lanyards guide β€” compare it across the lanyards collection. The dual-class leading edge lanyard β€” FallTech 8260YLE A leading edge lanyard is what you reach for wh...

Check Price on Amazon

πŸ”’ Amazon Associate Β· You pay the same price Β· We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments β€” no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
EDITORIAL PICK. Featured in our best fall protection lanyards guide β€” compare it across the lanyards collection.

The dual-class leading edge lanyard β€” FallTech 8260YLE

A leading edge lanyard is what you reach for when the only anchor is at foot level and a fall would drag the line across a sharp structural edge β€” the situation where an ordinary lanyard can be cut through. The FallTech 8260YLE is built for exactly that: a Y-leg cable-core lanyard whose lifeline is tested on a .005 inch radius sharpened steel edge, wrapped in a red PVC cover so the crew can identify it as a leading-edge unit at a glance. It is dual class, rated for both a 6 ft overhead free fall and a 12 ft foot-level free fall, and its two legs give 100% tie-off as you move across the steel.

Shoppers searching a leading edge shock absorbing lanyard, a y leg lanyard, a dual class lanyard, or a sharp edge lanyard land here; it carries steel rebar hooks and a snap hook, plus a D-ring for a self-retracting device, at an ANSI 130 to 310 lb capacity. Match it to your harness and anchor, and run the clearance math, covered below.

Key features

  • Leading edge Y-leg (twin-leg) shock-absorbing lanyard for foot-level tie-off
  • Cable-core lifeline tested on a .005 in radius sharpened steel edge
  • Dual class β€” 6 ft overhead and 12 ft foot-level free fall
  • Steel rebar hooks + snap hook; D-ring for a self-retracting device
  • Red PVC cover for easy leading-edge identification; ANSI 130–310 lb
  • FallTech β€” coated galvanized cable, plated alloy-steel hardware

Pros & cons

Pros
  • Edge-tested for foot-level sharp-edge falls
  • Dual class handles 6 ft and 12 ft free fall
  • Y-leg 100% tie-off with rebar hooks
Cons
  • Specialist price versus a standard lanyard
  • Foot-level free fall demands more clearance

Specifications

Type Leading edge Y-leg cable shock-absorbing lanyard
Edge rating Tested on .005 in radius sharpened steel edge
Class Dual class β€” 6 ft and 12 ft free fall
Hooks / capacity Rebar hooks + snap hook; ANSI 130–310 lb
Brand / SKU FallTech / 8260YLE

What the 8260YLE is for

Steel erection and structural work where anchors are at foot level and the fall path crosses a sharp edge β€” the job a standard lanyard is not rated for. It sits in the lanyards collection, is the connector in the ABC system explained in the fall protection equipment guide and the ABCDs of fall protection, and applies wherever a fall hazard triggers the rules in when is fall protection required.

Building the system around the lanyard

Clip the harness end to the back D-ring of a harness from the full body harnesses collection β€” ranked in the best safety harness guide β€” and the rebar hooks to a foot-level anchor from the anchor points collection, such as a trailing I-beam anchor, sized to the anchor strength requirements and ranked in the best roof anchors guide, with rated connectors where needed. Inspect the harness to the harness inspection checklist, and fit a suspension trauma strap for the rescue plan.

How the 8260YLE compares

A standard lanyard like the twin-leg rebar SafeWaze V-Line or the free-fall-rated SafeWaze FS88760-FF is not rated for sharp-edge contact β€” only a leading-edge unit is. For a retractable option at an edge, a leading-edge self-retracting lifeline arrests shorter β€” browse the self-retracting lifelines collection and the best self-retracting lifelines guide, and weigh the trade-offs in shock-absorbing lanyard vs SRL. Browse the lanyards & lifelines collection, or build a rig from the best fall protection kits. Everything lives in the fall protection collection.

Safety note: a leading edge lanyard is one part of a personal fall arrest system β€” it works only with a rated full body harness and a rated anchor, under OSHA 1926.502 and the FallTech instructions. Use a leading-edge unit only for the edge and free-fall class it is rated for; a foot-level tie-off produces a longer free fall, so you need more clearance below, not less β€” run the full clearance calculation for the 12 ft class if that applies. Keep one leg connected while you move the other, stay within the 130 to 310 lb range, and retire the lanyard after any fall, a deployed shock pack, or cable damage.

Ordering FAQ

Is the FallTech 8260YLE leading edge lanyard in stock and ready to ship?
Yes β€” this listing is active and ships through Amazon. The linked Amazon listing carries live price and delivery.

What makes it a leading edge lanyard?
It is built for falls where the line can drag across a sharp structural edge. Its cable-core lifeline is tested on a .005 in radius sharpened steel edge, and a red PVC cover marks it as a leading-edge unit β€” so a foot-level fall over an edge does not cut the line.

When do I need a leading edge lanyard?
When your only anchor is at foot level and the fall path crosses a sharp edge β€” steel decking, beams, and structural steel. A standard lanyard is not rated for that edge contact; a leading-edge one is.

What does dual class mean?
It is rated for both foot-level and overhead tie-offs, covering a 6 ft free fall and a 12 ft free fall. One lanyard handles both standard overhead anchoring and the longer foot-level free fall.

Is it single-leg or twin-leg?
Y-leg β€” twin-leg. Two legs give 100% tie-off, so you stay connected on one while you move the other across the structure.

What hooks does it have?
Steel rebar hooks and a steel snap hook tie-off, plus a D-ring for attaching a self-retracting device. The rebar hooks clip onto structural steel and rebar.

What is the weight capacity?
An ANSI user capacity of 130 to 310 lb, including the worker plus tools within that range.

Why the red cover on the cable?
The red PVC cover protects the cable and makes it easy to identify the lanyard as a leading-edge model on the jobsite, so it is not confused with a standard lanyard.

What is it made of?
A coated galvanized steel cable lifeline with plated alloy-steel hardware β€” durable materials chosen to survive edge contact. It is marked intermediate-to-advanced skill level to set up correctly.

Is the 8260YLE OSHA compliant?
As the connecting device in a fall arrest rig, it works within a compliant setup with a rated full body harness and anchor under OSHA 1926.502, and it meets ANSI. Foot-level tie-off makes the fall-clearance calculation critical.

How do I inspect it before use?
Check the cable and its red cover for cuts, kinks, and broken strands; the shock pack for deployment; and the rebar hooks and snap hook gates for function. Retire it after any fall or a deployed pack.

How do I reorder for a crew?
Reorder from this page β€” the linked Amazon listing makes equipping a crew for leading-edge work quick.

As an Amazon Associate, WC Safety earns from qualifying purchases. We stock this product; affiliate links do not affect the price you pay.

By Steven Eaton, WC Safety Editorial β€” fall protection desk. Specs are drawn from the manufacturer listing and published product data; we do not invent test results. Your employer’s hazard assessment and a qualified person’s system design govern final selection and use.
Brand / Vendor
FallTech
Model / SKU
β€”
Product Type
Lanyard
Price
$298.25 (Amazon)
Availability
Check current availability on Amazon
🏷️
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
🏭
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
πŸ”¬
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
🏭
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors β€” not casual consumers.
Verified Buyer Reviews

Customer Reviews

Share Your Experience

Write a Review

Select a rating
βœ“

Thank you for your review!

Your submission has been received and will be published after verification.

FallTech 8260YLE Leading Edge Lanyard β€” Dual Class Y-Leg, Rebar Hooks