KwikSafety Gibbon Grip Cross Arm Strap Anchor — 3, 6 & 10 ft (Double D-Ring)

A cross arm strap anchor in three lengths — KwikSafety Gibbon Grip

Most strap anchors come in one length and hope it fits your steel. The KwikSafety Gibbon Grip is the cross arm strap anchor that solves that with range — 3, 6, and 10 ft — so the wrap actually closes on the joist, beam, or column in front of you. Loop it, pass one D-ring through the other to choke, and the standing D-ring is your rated tie-off. ANSI tested, OSHA compliant, and priced for outfitting a whole crew.

Read the full KwikSafety Gibbon Grip Cross Arm Strap Anchor review →

Searches for the gibbon grip anchor or a kwiksafety cross arm strap land here; for cross arm strap fall protection rigging the wrap-edge-clearance discipline below matters more than the length you pick — but the length range is why this one fits jobs the single-size straps do not.

Key features

• Three lengths: 3 ft, 6 ft, 10 ft (choose above)
• Double-D-ring web pass-thru choke — nothing threads wrong
• ANSI tested, OSHA compliant anchor hardware
• Wraps beams, joists, and columns into rated tie-off points
• KwikSafety — live Amazon pricing per length on the linked listings

Pros & cons

Specifications

What the Gibbon Grip is for

Mechanical, electrical, and steel trades working under decks and along beam lines — anywhere the overhead is structure, not roof, and the steel comes in more than one size. It holds the multi-length slot of the connectors collection, supplies the A of the ABC system in the fall protection equipment guide, and can serve as end anchorage for a horizontal lifeline span per the system manual. The worker’s side starts at the ranked harness guide and the loadout in the construction PPE checklist.

Building the system on this strap

Clip a shock-absorbing lanyard from the lanyards collection (ranked in the lanyard guide) or an SRL from the SRL collection (ranked in the SRL guide) to the standing D-ring — a Saflok carabiner keeps the connection clean, and every harness in the plan should carry trauma straps.

How the Gibbon Grip compares

Guardian’s 10787 Premium is a 6 ft premium build and the 01630 a 4 ft pass-thru loop; the Werner strap undercuts at 3–4 ft. The Gibbon Grip’s pitch is the length range in one product line. Steel you can through-drill takes the bolt-on FallTech 7414, and sharp or hot wrap paths take the galvanized Guardian 10412 cable choker. The full field lives in the fall protection collection.

Safety note: a strap anchor is one component of a personal fall arrest system — wrap it per KwikSafety’s instructions on structure a qualified person judges adequate, protect the webbing from sharp edges, and let OSHA 1926.502’s 5,000 lb-per-worker anchorage rule govern the rig in use. Anchor at or above the D-ring where geometry allows, run the clearance math, and retire every loaded component after an arrest.

Ordering FAQ

Is the KwikSafety Gibbon Grip in stock and ready to ship?
This listing is active and ships through Amazon. Select your length on this page; each variant links to its own live Amazon listing for price and delivery.

What lengths does the Gibbon Grip come in?
Three: 3 ft, 6 ft, and 10 ft, selectable above. Match the length to the girth of the steel you wrap — the strap must choke fully around the member with the D-rings clear of the wrap. The 10 ft suits large columns and doubled wraps.

How does the double-D-ring choke work?
Wrap the strap around the beam and pass one D-ring through the other — the strap cinches on the steel and the standing D-ring becomes the rated connection point for your snap hook. Web-pass-thru, so nothing threads wrong.

Is the Gibbon Grip ANSI and OSHA compliant?
KwikSafety lists it as ANSI tested and OSHA compliant hardware. As with any anchor, compliance in use depends on wrapping it per the instructions on structure that can hold the load.

What structures suit a cross arm strap anchor?
Overhead beams, joists, columns, and structural steel a wrap can encircle — the standard anchor for mechanical, electrical, and steel trades needing a tie-off where no fixed anchor exists.

What connects to the strap?
A shock-absorbing lanyard or SRL via a rated self-locking snap hook or carabiner on the standing D-ring. Anchor at or above your dorsal D-ring where geometry allows and run the clearance math first.

Why choose the 10 ft length?
Bigger steel and wrap-back rigs: a 10 ft strap encircles large columns or doubles around a member for a shorter effective sling. On small joists it is just excess web to manage — size to the steel.

Can the strap sit against sharp steel?
Pad or avoid sharp and rough edges — cutting under load is webbing’s failure mode. Inspect the wrap path before rigging; where the steel bites, a galvanized cable choker is the more durable anchor.

How many workers can tie off to one strap?
One per strap unless KwikSafety’s instructions state otherwise — the OSHA anchorage requirement applies per attached worker.

How do I inspect the Gibbon Grip?
Before each use: webbing free of cuts, fraying, burns, UV chalking, and chemical damage; stitching intact; both D-rings free of deformation or cracks. Retire after any fall arrest with the loaded system.

Gibbon Grip or a Guardian cross arm strap — which should I buy?
Same rigging concept; the Gibbon Grip’s edge is the three-length range and value price. Guardian’s 10787 is 6 ft premium, the 01630 is a 4 ft pass-thru loop. Match length to your steel first, then pick on price and brand preference.

Does the Gibbon Grip work as horizontal lifeline end anchorage?
Strap anchors are the usual end hardware for temporary HLL systems — but only per the lifeline system’s manual, which specifies the anchorage strength its arrest loads demand.

How do I reorder straps for a crew?
Reorder from this page — each length variant keeps its own linked Amazon ASIN, so adding a strap to every gang box takes seconds.

As an Amazon Associate, WC Safety earns from qualifying purchases. Affiliate links do not affect the price you pay.