🔍 Click to zoom
Jackson Safety WS Cutting Goggle — Shade 5 IRUV (Round Lens)
$13.43
Final price set by Amazon · may vary
EDITORIAL REVIEW: 4.5/5 WC Safety Review — Jackson Safety WS Cutting Goggle — Shade 5 IRUV (Round Lens) Read the full Jackson Safety WS Cutting Goggle review → Best For: Cutting and brazing for workers who...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Rankings are never sold or influenced by manufacturers.
Independent Product ResearchBuilt from manufacturer specifications, published standards information, and cited sources
Standards MatterRatings and markings vary by model and variant — verify the manufacturer’s documented rating for your hazard
Built for Industrial BuyersResearch written for safety managers, procurement teams, and field supervisors.
EDITORIAL REVIEW: 4.5/5
WC Safety Review — Jackson Safety WS Cutting Goggle — Shade 5 IRUV (Round Lens)
Read the full Jackson Safety WS Cutting Goggle review →
Best For: Cutting and brazing for workers who wear prescription glasses — the WS body fits over most frames, with indirect venting to fight fog and Shade 5 IRUV lenses for gas work.
Not For: Arc welding (use a helmet), light soldering (Shade 3 is comfier), or heavy grinding needing a single full-coverage impact lens.
Bottom Line: The over-the-glasses pick at the lowest price in the lineup — Shade 5 IRUV, indirect-vent, ANSI Z87.1+. For a flip-up version, see the Jackson WS flip-front.
Editorial assessment by Steven Eaton, WC Safety editor. WC Safety did not laboratory-test this product; scoring reflects published manufacturer specifications, ANSI Z87.1 marking, application fit, and category expertise.
Jackson Safety WS Cutting Goggle — Shade 5 IRUV (Round Lens) Overview
Impact protection and splash protection are different tests. ANSI Z87.1 rates spectacles for impact, but only a device marked for splash (D3) is evaluated against a chemical splash hazard; safety glasses with open sides do not qualify, and a face shield is a secondary protector worn over primary eye protection rather than instead of it.
The Jackson Safety WS Series cutting goggle uses 50 mm round Shade 5 IRUV filter lenses in a heat-resistant frame with indirect top-and-bottom venting, marked ANSI Z87.1+. It fits over most prescription eyewear, making it the go-to cutting goggle for Rx-glasses wearers. Browse the full welding goggles collection and the broader safety goggles and eye protection ranges, and see when a goggle beats glasses in safety glasses vs goggles.
Where the Jackson WS (round) Fits in Eye-Protection Selection
Match the eye protection to the process. Shade 5 is for oxy-fuel cutting and brazing; arc welding needs a helmet instead. Confirm filter density in our welding shade-number reference, the impact/marking rules in ANSI Z87.1, and the employer requirement in OSHA 29 CFR 1910.133.
Who Should Buy the Jackson WS (round)?
- Buy it if workers wear prescription glasses and need a Shade 5 goggle that fits over them.
- Buy it if you want indirect venting to reduce fogging during cutting.
- Choose another shade if your process differs — Shade 5 Lincoln K3118-1 or Shade 3 K3118-2.
- Choose open glasses instead for quick incidental torch work — see welding safety glasses.
- Choose a helmet instead for arc welding — the welding helmets guide.
What Does the Jackson WS (round) Protect Against?
| Hazard | Fit | Buyer guidance |
|---|---|---|
| IR/UV from oxy-fuel cutting and brazing | Shade 5 | Correct density for this process class. |
| Sparks, slag & spatter | Sealed | The goggle body blocks multi-angle spatter open glasses miss. |
| Grinding particles & impact | ANSI Z87.1 | Impact-rated — see Z87.1 explained. |
| Arc-welding radiation | Not suitable | Arc work needs a helmet, not a fixed-shade goggle. |
What the Jackson WS (round) Does NOT Protect Against
- It is not for arc welding (MIG/TIG/stick) — those require an auto-darkening helmet.
- Round twin lenses are for cutting/IR, not a single wraparound grinding lens.
- It is not a face shield — add one over the goggle for full-face grinding coverage.
Important: Filter shade must match the process intensity — too light underprotects against IR/UV (risking photokeratitis and retinal damage), too dark causes strain that leads workers to remove protection. Verify the correct shade against the shade-number reference and OSHA 1910.133 before use.
Best Applications
Over-the-glasses cutting
The standout use — the roomy WS body clears most Rx frames while delivering Shade 5 IRUV.
Brazing
Shade 5 covers heavier brazing; light soldering is comfier in Shade 3.
Grinding & fabrication
The impact-rated lens lets it double for grinding; round out the kit with welding respirators and the helmet range.
Pros
- Fits over most prescription glasses
- Indirect top/bottom venting reduces fog
- ANSI Z87.1+ high impact
- Lowest price in the lineup
Cons
- Twin round lenses, not a grinding wraparound
- Shade 5 too dark for soldering
- Not for arc welding
- Bulkier over large frames
Jackson WS (round) vs Other Welding & Cutting Goggles
| Goggle | Shade | Style | Best for |
|---|---|---|---|
| Lincoln K3118-1 | 5 | Wide sealed | Cutting + grinding |
| Lincoln K3118-2 | 3 | Wide sealed | Light cutting, brazing |
| Forney 55320 | 5 | Flip-up cup | Oxy-acetylene, inspect between cuts |
| Forney 55301 | 5 | Fixed cup | Budget oxy-acetylene |
| Jackson WS (round) | 5 | Round, OTG indirect-vent | Over-the-glasses cutting |
| Jackson WS (flip) | 5 | Flip-front, OTG | Flip to inspect + OTG |
| Sellstrom Odyssey II | 5 | Sealed indirect-vent | High-temp / foundry |
Jackson WS round vs flip-front
Both are Shade 5 IRUV OTG goggles. The round model is fixed and cheapest; the flip-front WS flips the filter up to inspect work. Verdict: round to save, flip-front if you inspect often.
Jackson WS round vs Lincoln K3118-1
The WS round fits over glasses and vents indirectly; the Lincoln K3118-1 is a sealed wide grinding-capable goggle. Verdict: WS for Rx-glasses wearers, K3118-1 if the goggle must also grind.
Jackson WS (round) Specifications
| Manufacturer | Jackson Safety |
| Model / SKU | 15991 |
| Shade | 5 (IR/UV filter) |
| Standard | ANSI Z87.1 |
| Style | Round IRUV lens, indirect-vent, fits over glasses |
| Use | Oxy-fuel cutting & brazing, over prescription glasses |
Helpful Buying Guides
- Best eye protection for welders
- Welding shade-number reference
- Safety glasses vs goggles
- Can safety glasses be used for welding?
- ANSI Z87.1 standard explained
- OSHA 29 CFR 1910.133 eye & face protection
Jackson Safety WS Cutting Goggle — Shade 5 IRUV (Round Lens) Frequently Asked Questions
How much does the Jackson WS round cost?
WC Safety lists it at — the lowest-priced welding goggle in the lineup.
Does it fit over prescription glasses?
Yes — the WS body is sized to fit over most Rx frames.
What shade are the lenses?
Shade 5 IRUV — standard for oxy-fuel cutting and brazing.
Is it ANSI rated?
Yes — ANSI Z87.1+ for high impact, so it also handles incidental grit.
Does it fog up?
Indirect top-and-bottom venting reduces fogging during cutting.
Round or flip-front WS?
Round is fixed and cheapest; the flip-front lets you flip the filter up to inspect work.
Can I use it for arc welding?
No — arc welding needs a helmet, not a fixed Shade 5 goggle.
Are the lenses replaceable?
The WS uses standard 50 mm round filter lenses.
Is it OSHA compliant?
An ANSI Z87.1+ Shade 5 goggle meets OSHA 1910.133 when the shade matches the task.
Can I grind in it?
It handles incidental grit; for heavy grinding choose a wraparound polycarbonate goggle.
Is Shade 5 right for cutting?
Yes — Shade 5 is the common oxy-fuel cutting density; confirm against the shade reference.
Can I wear it with a respirator?
Yes — pair it with a welding respirator for fume protection.
Written by Steven Eaton, WC Safety Editorial — Industrial eye-protection desk; specialization in welding/cutting filter shades, ANSI Z87.1 selection, and OSHA 1910.133 compliance.
Reviewed by: WC Safety Editorial · Last reviewed:
Standards referenced: ANSI/ISEA Z87.1-2020, OSHA 29 CFR 1910.133, ANSI Z49.1, Jackson Safety product data.
Editorial standard: Zero sponsored listings. No manufacturer input. Shade/marking verified against published specifications; not WC Safety laboratory testing.
Reviewed by: WC Safety Editorial · Last reviewed:
Standards referenced: ANSI/ISEA Z87.1-2020, OSHA 29 CFR 1910.133, ANSI Z49.1, Jackson Safety product data.
Editorial standard: Zero sponsored listings. No manufacturer input. Shade/marking verified against published specifications; not WC Safety laboratory testing.
Where this sits against the alternatives is covered in amber vs clear lens safety glasses, anti fog safety glasses guide, anti fog vs anti scratch safety glasses.
To see what else meets the same specification, start with 3m safety glasses, 3m virtua safety glasses, anti fog safety glasses.
Written by Steven Eaton, WC Safety editor. WC Safety is an independent PPE review site, holds no inventory and sells nothing directly; Amazon links are affiliate links that earn a commission at no cost to you and never affect the assessment. This page is not medical, legal or regulatory advice.
Brand / Vendor
Jackson Safety
Model / SKU
15991
Product Type
Safety Goggle
Price
$13.43 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place on documented safety credentials and specifications — never advertising spend.
Industrial Grade Only
Coverage focuses on equipment built for professional use in manufacturing, construction, and industrial environments.
Independent Product Research
Product information is compiled from manufacturer specifications, published standards information, compatibility data, and other cited sources.
Affiliate Disclosure
WC Safety may earn commissions from qualifying purchases made through affiliate links. Affiliate relationships never change the specifications presented.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.