NoCry Cut Resistant Work Gloves with Reinforced Fingers
NoCry Cut Resistant Work Gloves with Reinforced Fingers from NoCry — a trusted, top-rated safety brand. See the full cut-resistant gloves collection and our cut-resistant gloves buyer’s guide.Use the button below to c...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
NoCry Cut Resistant Work Gloves with Reinforced Fingers from NoCry — a trusted, top-rated safety brand. See the full cut-resistant gloves collection and our cut-resistant gloves buyer’s guide.
Use the button below to check current pricing and availability on Amazon. As an Amazon Associate, WC Safety earns from qualifying purchases.
What to check before you buy
- Cut level for the actual hazard
- ANSI/ISEA 105 cut levels run A1 to A9. Handling cardboard and pallets is a different problem from handling sheet metal or glass.
- Grip coating and conditions
- Coatings behave differently wet, oily and dry. A coating that grips dry cardboard can be useless on oily steel.
- Impact protection
- Back-of-hand impact protection is separately rated under ANSI/ISEA 138. It addresses crushing and pinch injuries that cut resistance does nothing for.
- Dexterity trade-off
- Higher cut levels usually mean thicker, stiffer gloves. A glove too clumsy for the task gets removed, which protects nobody.
How it compares to other material handling gloves we review
| Product | List price |
|---|---|
| NoCry Cut Resistant Work Gloves with Reinforced Fingers (this page) | $35.99 |
| MCR Safety 92752-XXS CutPro A5 Polyurethane-Coated Gloves — XX-Small | $13.99 |
| MCR Safety 92752 CutPro A5 Polyurethane-Coated Gloves — Small-Hand Fit | $39.90 |
| MCR Safety MU3664KGW Mustang HiDex Goatskin Kevlar FR Gauntlet — Small | $46.79 |
| MCR Safety MU3664KGW-XXXL Mustang HiDex Goatskin Kevlar FR Gauntlet — XXX-Large | $26.99 |
| MCR Safety MU3664K Mustang HiDex Goatskin Kevlar FR Gloves | $46.79 |
| MCR Safety MU3664K-XXXL Mustang HiDex Goatskin Kevlar FR Gloves — XXX-Large | $31.45 |
List prices recorded when this page was last updated; Amazon pricing moves frequently, so check the live listing. Browse the full material handling gloves range.
Frequently asked questions
What do ANSI cut levels mean?
ANSI/ISEA 105 rates cut resistance from A1 to A9 based on the weight required to cut through the material over a set distance. Higher numbers mean more cut resistance.
What cut level do I need?
Match it to the hazard. General handling and packaging often sit in the A1 to A3 range; sheet metal, glass and blade work push toward A4 and above.
What is ANSI/ISEA 138?
The standard for back-of-hand impact protection, rated 1 to 3. It is separate from cut rating and addresses crush and pinch injuries.
Which coating should I choose?
Nitrile handles oils well, polyurethane gives fine dexterity for dry precision work, latex grips well in the wet. The condition of what you are handling decides it.
Do cut-resistant gloves stop punctures?
Not reliably. Cut and puncture are different failure modes and are rated separately - a high cut level says little about needle or spike resistance.
Where do the specifications on this page come from?
They are taken from the manufacturer's published listing. WC Safety does not laboratory-test products, and nothing is claimed here that the manufacturer does not state.
Does WC Safety sell this product?
No. WC Safety is an independent review site and an Amazon Associate. Purchases happen on Amazon, and we earn a commission on qualifying purchases at no extra cost to you.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.