🔍 Click to zoom
Zircon StudSensor A100 Edge Finding Stud Finder Wall Scanner, Wood and Metal Studs
$26.32
Final price set by Amazon · may vary
Amazon customer rating: 4.4 / 5 - WC Safety review of the Zircon StudSensor A100 Edge Finding Stud Finder Wall Scanner, Wood and Metal Studs. Written by Steven Eaton, WC Safety Editorial, from the published Zircon l...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
Amazon customer rating: 4.4 / 5 - WC Safety review of the Zircon StudSensor A100 Edge Finding Stud Finder Wall Scanner, Wood and Metal Studs.
Written by Steven Eaton, WC Safety Editorial, from the published Zircon listing. The score above is the live Amazon customer rating captured at review time - not a WC Safety test result. We did not laboratory-test this product.
Written by Steven Eaton, WC Safety Editorial, from the published Zircon listing. The score above is the live Amazon customer rating captured at review time - not a WC Safety test result. We did not laboratory-test this product.
The Zircon StudSensor A100 Edge Finding Stud Finder Wall Scanner, Wood and Metal Studs is one of our picks for the measuring tool lineup. Everything below comes straight from the manufacturer's published listing - specs, capacities, and dimensions are theirs, not ours.
Layout starts with measurement you can trust: a locking 25-foot tape is the universal jobsite unit, and a stud finder with live-wire detection is a safety tool as much as a convenience - drilling blind into a live cable is a preventable incident. For lines and levels at room scale, the laser level collection picks up where the tape stops.
Key details, quoted from the manufacturer's published listing:
- Accurate Edge Finding for DIY Projects: Zircon StudSensor A100 helps locate wood and metal stud edges, while the LCD screen, audio tone, SpotLite Pointer and V marker groove help guide marking before hanging shelves, mirrors, cabinets or TVs
- Correct Calibration for Better Scans: Hold scanner flat against the wall, then press and hold the Power Button; in 1–2 seconds, a short beep confirms calibration is complete. Do not move during calibration, then slide slowly to scan
- Two Scanning Modes: StudScan Mode finds stud edges up to 3/4 in. deep for standard scans, while DeepScan Mode reaches up to 1 1/2 in. to help locate studs behind thicker walls, ceilings and surfaces
- Detects Live Electrical Wires: WireWarning Detection helps alert you to hot, unshielded electrical wires behind the wall, continuously detecting them up to 2 in. deep while you scan for studs or metal before drilling or mounting
- Low Battery Indicator: Lets you know when battery power is too low for proper scanning, helping you replace it with a new 9V alkaline battery with an extended expiration date for optimum performance
See every measuring and layout tool, throw lines with a laser level, and browse all jobsite equipment.
What to check before you buy
- Blade standout and hook play
- Standout is how far a tape extends unsupported before it collapses - the practical limit for solo measuring. The hook is designed to move by its own thickness; that play is correct, not a fault.
- Accuracy class
- Tapes are manufactured to accuracy classes. For fine work, mixing tapes from different classes across a job introduces cumulative error.
- Readability in the conditions
- High-contrast markings and the right units for your trade matter more day to day than headline length.
- One tape per job
- Small differences between tapes compound across a layout. Marking out with the same tape throughout avoids chasing errors that are not there.
How it compares to other measuring and layout tools we review
| Product | List price |
|---|---|
| Zircon StudSensor A100 Edge Finding Stud Finder Wall Scanner, Wood and Metal Studs (this page) | $26.32 |
| Amazon Basics Self-Locking Tape Measure, 25 ft, Dual Scale Inch Metric | $19.97 |
| CRAFTSMAN 25-Ft Tape Measure with Fraction Markings, Retractable Self-Locking Blade | $14.98 |
| WORKPRO 25-FT Tape Measure with Fractions, 3 Brakes Retractable Measuring Tape | $9.99 |
| Stanley FMHT74038A FatMax 25 Foot Tape Measure, 2 Pack | $40.95 |
| Mr. Pen Retractable Tape Measure 25 ft, Yellow, Easy Read Steel Measuring Tape | $7.85 |
| Franklin Sensors ProSensor M210 Stud Finder with Live Wire Detection, 13-Sensor Wall | $59.97 |
List prices recorded when this page was last updated; Amazon pricing moves frequently, so check the live listing. Browse the full measuring and layout tools range, or see all jobsite equipment.
Frequently asked questions
Why does the hook on my tape measure move?
It is designed to. The hook slides by exactly its own thickness so that inside and outside measurements both read true. A hook that is rigid or bent is the actual problem.
What is tape standout?
The distance the blade extends horizontally before it buckles. Longer standout means you can measure further without a second person or a support.
How accurate are tape measures?
They are manufactured to defined accuracy classes with permitted tolerances that grow with length. For precise layout, use one tape throughout so any error stays consistent.
Should I use metric or imperial?
Whichever the drawings use. Converting mid-job is where mistakes enter, and dual-marked tapes make it easy to read the wrong scale.
When should a tape be retired?
When the blade is kinked, the printing is worn where you read it most, or the hook is bent or loose beyond its designed movement.
Where do the specifications on this page come from?
They are taken from the manufacturer's published listing. WC Safety does not laboratory-test products, and nothing is claimed here that the manufacturer does not state.
Does WC Safety sell this product?
No. WC Safety is an independent review site and an Amazon Associate. Purchases happen on Amazon, and we earn a commission on qualifying purchases at no extra cost to you.
How was the rating on this page determined?
The score shown is the live Amazon customer rating captured at the time of review. It reflects buyer feedback, not a WC Safety test result.
Brand / Vendor
Zircon
Model / SKU
—
Product Type
Measuring & Layout
Price
$26.32 (Amazon)
Availability
Check current availability on Amazon
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews
Customer Reviews
Share Your Experience
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.