Peakworks Roof Harness Anchor — Temporary Stainless Steel Bracket

A roof harness anchor that travels with the crew — Peakworks temporary bracket

Every tied-off roofer needs the same thing first: a rated roof harness anchor between the structure and the lifeline. The Peakworks temporary bracket answers it the portable way — stainless steel, fastened into the framing for the day, removed clean at closeout, and back in the gang box for the next job. For crews that work a different roof every week, this is the anchor that actually gets used.

Read the full Peakworks Roof Harness Anchor review →

As a portable roof anchor it competes head-on with Guardian’s Pitch Pro in the temporary class of our ranked anchor guide; the stainless build is the Peakworks argument. Searchers comparing a roof safety anchor for one-off repairs, inspections, and storm work are in exactly the right place.

Key features

• Stainless steel construction — corrosion resistance for jobsite life
• Temporary install: fastens into framing, removes at closeout
• Rated tie-off point for harness-and-lifeline systems
• Made for industrial, construction, and roofing fall protection work
• Peakworks — live Amazon pricing on the linked listing

Pros & cons

Specifications

What this bracket is for

Day work on pitched roofs: repairs, inspections, gutter and flashing jobs — anywhere roof tie off anchors are needed for hours, not years. It fills the portable slot of the anchor points collection, supplies the A of the ABC system in the fall protection equipment guide, and joins a harness from the ranked harness guide plus the jobsite loadout in the construction PPE checklist.

Building the system on this anchor

Pair it with a Peakworks vertical lifeline for a single-vendor rig, (the premium polysteel version upgrades the rope), or any 5/8 in system from the vertical lifelines guide; self-connection gets easier with a pick from the D-ring extenders guide; SRL users shop the SRL collection when clearance runs short. One-box starters live in the ranked kits guide — the Peakworks RK6-50 kit keeps the brand consistent — and every harness on the job should carry trauma straps.

How the Peakworks bracket compares

Its direct rival is the Guardian Pitch Pro — powder-coated steel with a published 5,000 lb MBS against the Peakworks stainless build. Roofs you will service repeatedly favor the shingle-over Guardian RIDG-1 or double-ring Ridge-It; standing-seam metal takes the Guardian 250 clamp. The whole family lives in the fall protection collection.

Safety note: an anchor is one component of a personal fall arrest system — installed strength depends on fastening into sound structure per Peakworks’ instructions, and OSHA 1926.502’s 5,000 lb-per-worker anchorage rule judges the system in use. Work in line below the anchor, run the clearance math before picking the connector, and retire every loaded component after an arrest.

Ordering FAQ

Is the Peakworks roof anchor bracket in stock and ready to ship?
This listing is active and ships through Amazon. Open the linked listing for live price, availability, and delivery speed.

What is the Peakworks bracket made of?
Stainless steel, per Peakworks’ listing — corrosion resistance for hardware that rides in a gang box between roofs rather than living under shingles.

How does the bracket install?
Fasten it through the roof surface into rafters or trusses following Peakworks’ fastener pattern, work in line below it, then remove the fasteners at closeout and seal the holes.

What connects my harness to this anchor?
A vertical lifeline with rope grab is the classic pitched-roof pairing; an SRL or shock-absorbing lanyard works where clearance allows. The anchor point takes standard rated snap hooks.

Is this a permanent anchor?
No — it is a temporary bracket by design. If you want a tie-off point that stays on the roof for future service visits, use a shingle-over ridge anchor instead; many crews carry both types.

Can I reuse the bracket on the next job?
Yes — remove it, inspect it, and redeploy. Retire it immediately after any fall arrest or if you find deformation, cracked welds, or damaged fastener holes.

What roofs suit this bracket?
Wood-framed pitched roofs where fasteners can reach structure — residential shingle work is the home turf. Standing-seam metal takes a non-penetrating clamp and concrete takes a drop-in anchor instead.

How strong does a roof anchor have to be under OSHA?
The anchorage rule is 5,000 lb per attached worker, or a system designed by a qualified person at a 2:1 safety factor — and the installed strength always depends on hitting sound structure with the fasteners.

How many workers can tie off to this bracket?
Plan on one worker per anchor unless Peakworks’ instructions for your installed configuration state otherwise — OSHA’s anchorage requirement applies per attached worker.

What should I inspect before each use?
Metal free of deformation and cracks, no corrosion bloom, fastener holes undamaged, fasteners tight in framing. Anything questionable gets tagged out until a competent person clears it.

Peakworks or the Guardian Pitch Pro — how do I choose?
Both are temporary pitched-roof brackets at similar prices; the Peakworks build is stainless, the Pitch Pro is powder-coated steel with a published 5,000 lb MBS. Stock whichever your supplier fills faster — or standardize on one so inspection habits transfer.

Does the bracket come with a lifeline or harness?
No — it is the anchor only. Pair it with a vertical lifeline assembly and harness, or start from a boxed roofing kit and use this bracket as the anchor for the second worker.

How do I reorder this bracket for a crew?
Reorder from this page — the listing and its linked Amazon ASIN stay constant, so outfitting additional crew positions takes seconds.

As an Amazon Associate, WC Safety earns from qualifying purchases. Affiliate links do not affect the price you pay.