PATIKIL Conveyor Roller, 2in Diameter, 6in Length, 2 Pack Stainless Steel Gravity
Amazon customer rating: 4.5 / 5 - WC Safety review of the PATIKIL Conveyor Roller, 2in Diameter, 6in Length, 2 Pack Stainless Steel Gravity. Written by Steven Eaton, WC Safety Editorial, from the published PATIKIL l...
Check Price on Amazonπ Amazon Associate Β· You pay the same price Β· We earn a small commission
Written by Steven Eaton, WC Safety Editorial, from the published PATIKIL listing. The score above is the live Amazon customer rating captured at review time - not a WC Safety test result. We did not laboratory-test this product.
The PATIKIL Conveyor Roller, 2in Diameter, 6in Length, 2 Pack Stainless Steel Gravity is one of our picks for the conveyor lineup. Everything below comes straight from the manufacturer's published listing - specs, capacities, and dimensions are theirs, not ours.
Gravity roller conveyors turn carrying into sliding - staging lines, packing benches, and truck loading all move faster when boxes roll. Set slope shallow enough that loads arrive controlled, guard the discharge end, and keep hands off moving rollers; replacement rollers here fit the standard 1.5 and 2 inch frames.
Key details, quoted from the manufacturer's published listing:
- Color: Silver; Shaft Diameter: 12mm / 0.47 inch; Roller Diameter: 50mm / 1.97 inch; Roller Length: 150mm / 5.91 inch; Total Length: 190mm / 7.48 inch
- Application: The conveyor rollers are cylindrical-shaped bars that run along and underneath a conveyor belt. Normally used in assembly lines, warehouses, and manufacturing facilities to transport goods
- Advantage: Constructed of a stainless steel surface and galvanized end caps, rust-resistant, waterproof, smooth and durable. Built-in bearings, spring press-in installation method
- Instruction: The gravity rollers are fitted into a frame, which is inclined slightly. They reduce the risk of goods being damaged and also withstand heavy loads
- Notice: Please confirm the size of roller, frame, width, and roller centers you need carefully before ordering
Compare all conveyors and rollers, feed them from a pallet jack or cart, and browse all jobsite equipment.
What to check before you buy
- Nip point guarding
- Conveyor injuries concentrate at in-running nip points - where the belt meets a pulley or roller. Guarding these is the primary control.
- Emergency stop access
- Stop controls need to be reachable from the working positions along the conveyor, not just at the control panel.
- Lockout before clearing a jam
- Reaching into a running conveyor to clear a jam is the classic amputation scenario. The energy control procedure applies.
- Load rating and incline
- Capacity ratings assume level running and even loading. Inclines, heavy point loads and surge loading all change the picture.
How it compares to other conveyors we review
| Product | List price |
|---|---|
| PATIKIL Conveyor Roller, 2in Diameter, 6in Length, 2 Pack Stainless Steel Gravity (this page) | $26.69 |
| Gravity Conveyor Roller Table Set, 18in Wide x 5ft Long with 1.9in Steel Rollers, Outfeed | $259.79 |
| Light-Duty Gravity Conveyor with 1.5in Dia Galvanized Steel Rollers, 12in Wide, 5ft Long | $119.50 |
| Gravity Roller Conveyor, 4m 157.5in x 35cm, Heavy Duty Unpowered Roller Track for Loading | $306.55 |
| Heavy Duty Roller Conveyor Table, 15in W x 78in L, Foldable Gravity Conveyor with ABS | $169.75 |
| Threlaco Foldable Conveyor Roller, Manual Portable, 15in W x 78in L, Heavy-Duty | $163.99 |
| Light-Duty Gravity Conveyor, Collocatable Conveyor Roller with Locking Screws, 78.74 x | $127.28 |
List prices recorded when this page was last updated; Amazon pricing moves frequently, so check the live listing. Browse the full conveyors range, or see all jobsite equipment.
Frequently asked questions
What is the main conveyor hazard?
In-running nip points, where a moving belt or chain meets a pulley, roller or sprocket. These points draw in hands, clothing and hair with no chance to pull free.
Do conveyors need guards?
Yes. OSHA machine guarding requirements apply, and the industry consensus standard ANSI B20.1 addresses conveyor safety specifically, including guarding of nip and shear points.
Can I clear a jam while the conveyor runs?
No. The conveyor must be shut down and its energy isolated under a lockout/tagout procedure before anyone reaches into it.
Where do emergency stops need to be?
Positioned so anyone working along the conveyor can reach one without moving toward the hazard. A single stop at the panel is rarely sufficient on a long run.
Does a gravity conveyor need the same precautions?
It has no drive, but it still has pinch points between rollers and can move loads faster than expected on a decline. Guarding and load control still apply.
Where do the specifications on this page come from?
They are taken from the manufacturer's published listing. WC Safety does not laboratory-test products, and nothing is claimed here that the manufacturer does not state.
Does WC Safety sell this product?
No. WC Safety is an independent review site and an Amazon Associate. Purchases happen on Amazon, and we earn a commission on qualifying purchases at no extra cost to you.
How was the rating on this page determined?
The score shown is the live Amazon customer rating captured at the time of review. It reflects buyer feedback, not a WC Safety test result.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.