First Aid Only 91247 100-Person First Aid Kit — OSHA-Oriented Soft-Sided Workplace Kit
The First Aid Only 91247 100-Person First Aid Kit is a soft-sided, OSHA-oriented workplace first aid kit from First Aid Only — one of the most established names in workplace first aid — sized to the traditional ...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
The First Aid Only 91247 100-Person First Aid Kit is a soft-sided, OSHA-oriented workplace first aid kit from First Aid Only — one of the most established names in workplace first aid — sized to the traditional 100-person fill convention. It is a dependable, well-organized choice for a small business, office, or supplemental station, backed by a brand with a deep catalog of matching refills.
One point to understand before you buy: like its 91248 sibling, this kit's listing describes OSHA-oriented coverage without naming an explicit ANSI/ISEA Z308.1 Class A or Class B — so we will not assert a class for it. Below we cover what that means, what the kit is good for, and where a class-named kit is the smarter buy.
As an Amazon Associate, WC Safety earns from qualifying purchases. This does not affect the price you pay.
About the First Aid Only 91247 100-Person First Aid Kit
This is a general-purpose workplace kit built on a familiar formula: a broad fill of everyday minor-injury supplies — bandages, gauze, antiseptic wipes, tape, and basic tools — organized in a soft-sided case and sized to the legacy 100-person convention. The advantage over a value no-name kit is the brand behind it: First Aid Only is a mainstream workplace first-aid maker, so refills, cabinets, and larger kits in the same family are easy to match and standardize across a site. To size a station to your actual headcount and hazards rather than a person label, start with our which first aid kit do you need guide.
The honest nuance is the same one that applies to every "OSHA-compliant" kit. OSHA does not certify first aid kits — under 29 CFR 1910.151 the employer judges whether supplies are adequate for the workplace, and OSHA references the ANSI/ISEA Z308.1 standard as the way to demonstrate that. Because this listing does not state an explicit Z308.1 Class A or Class B, a business that must show a documented class should choose a class-named kit — for example the First Aid Only 746000 SmartCompliance (ANSI A+) or the EVERLIT 400-piece Class A. Use the 91247 where a trusted brand and broad coverage matter more than a printed class.
Safety note: A first aid kit covers minor injuries only — it does not replace professional medical care, and it does not address every workplace hazard. If your site has a chemical splash hazard, you also need an ANSI Z358.1 eyewash station within the required reach; for severe or arterial bleeding you need a tourniquet and hemostatic gauze from a dedicated trauma kit, which this general kit does not include. Because OSHA holds the employer responsible for adequacy under 1910.151, match the kit to your actual hazards, keep trained responders on hand, and restock expired items on a schedule.
"OSHA-Compliant," "100-Person," and the Soft-Sided Case
Three things on this kit deserve translation. "OSHA-compliant" is a manufacturer's claim that the contents align with what OSHA expects, measured against ANSI/ISEA Z308.1 — not a government approval. "100-person" is a sizing convention from traditional cabinet fills, not an OSHA rule that 100 employees require a 100-person kit; a busy or higher-hazard site can outpace the person number, so audit consumption and top up from bulk refills. And the soft-sided case is best read as an indoor format: it is light and convenient, but it lacks the water and impact resistance of a gasketed hard case, so for outdoor or vehicle use step up to a rugged case or a wall cabinet for a central station.
Pros & Cons
Strengths
- Established First Aid Only brand — easy to match refills
- Broad 100-person fill for common minor injuries
- Organized soft-sided case, easy to inspect and restock
- Refillable from a deep consumable range
- Solid supplemental or small-business station
Limitations
- No explicit ANSI Z308.1 Class A/B stated on the listing
- "OSHA-compliant" is a claim, not a certification
- Soft-sided — not gasketed for outdoor/vehicle use
- No tourniquet/hemostatic — not a trauma kit
- Does not cover eye emergencies — add an eyewash station
Specifications
| Brand | First Aid Only |
| SKU / ASIN | 91247 / B08P28JYCR |
| Type | Soft-sided workplace first aid kit (100-person sizing) |
| Compliance | Marketed OSHA-compliant; no explicit ANSI Z308.1 class named |
| Coverage | Minor-injury supplies (verify current contents on the listing) |
| Best for | Indoor office/business station, brand standardization |
| Not for | Documented Class A/B, outdoor/vehicle, trauma, or eye emergencies |
Related Guides
Related Products
Frequently Asked Questions
What container type is the 91247, and is it suited to outdoor or vehicle use?
It is a soft-sided case, which is best suited to a stable indoor location — an office, break room, or fixed workstation. Soft cases are convenient and light but do not offer the water, dust, and impact resistance of a gasketed hard case, so for a work truck, trailer, or outdoor site a rugged gasketed vehicle kit is the better long-term choice. Match the container to the environment, not just the contents.
Does the 91247 include a tourniquet or splint?
Treat it as a minor-injury kit. A tourniquet and splint are items associated with higher-tier (Class B) kits, and this general 100-person kit is not marketed as carrying them. If your site has a machinery, laceration, or struck-by hazard, add a dedicated bleeding-control kit and keep it separate from your everyday first aid supplies rather than assuming this kit covers severe trauma.
Who decides whether the 91247 is "adequate" for my workplace?
You do, as the employer. Under 29 CFR 1910.151, the employer is responsible for ensuring first-aid supplies are adequate for the workplace's specific hazards, and OSHA references ANSI/ISEA Z308.1 as the way to demonstrate that. A kit labeled "OSHA-compliant" is a manufacturer claim — the legal duty to match supplies to your hazards stays with you.
Do the supplies expire, and how do I keep the kit current?
Yes. Medications, antiseptic wipes, and some adhesives carry expiration dates and degrade, and consumables run down after use. Inspect the kit on a schedule, check dates at least twice a year, replace expired items, and restock after every use. A kit that looks full but is full of dried-out or expired items is the most common first-aid failure in an audit.
Where should I place the 91247 in a facility?
Put it where injuries happen and where staff can reach it in seconds — near production areas, break rooms, and exits — at a marked, consistent height. Larger facilities are usually better served by several right-sized stations than one central kit. Because it is soft-sided, keep it somewhere clean and dry rather than exposed on a dusty or wet floor.
Is First Aid Only a reputable brand for workplace kits?
Yes. First Aid Only is a long-established workplace first-aid brand with a broad catalog of kits, cabinets, and refills, which makes matching refills and standardizing across a facility straightforward. Brand reliability is a genuine advantage here over unbranded value kits — but it still does not substitute for confirming the kit fits your hazard assessment and required class.
Do I need trained staff to use the kit effectively?
A kit is only as useful as the people using it. OSHA's medical-services rule expects that, where a clinic or hospital is not nearby, someone on site is trained to render first aid. Pair the kit with basic first aid/CPR training and a CPR rescue barrier, and post emergency numbers with it so employees can actually use the supplies under pressure.
What should I add if my site has chemical or eye hazards?
A general first aid kit does not handle eye emergencies. If employees are exposed to corrosives, dust, or flying debris, you also need an ANSI Z358.1 eyewash station within the required reach — the small saline vials in a first aid kit are not a substitute for a 15-minute flush. Add eyewash and, where relevant, a CPR rescue barrier to close the gaps a bandage kit leaves open.
Can the 91247 be used in a vehicle or work truck?
It can serve in a pinch, but a soft-sided case is not ideal for the heat, cold, and vibration of a vehicle over time. For a work truck or field crew, a purpose-built gasketed vehicle kit holds up better; reserve this soft-sided kit for a stable indoor station.
Are the individual supplies replaceable, or do I rebuy the whole kit?
You restock components, not the whole kit. First Aid Only's broad refill range lets you replace the items you consume most — bandages, gauze, tape, antiseptic — which keeps the kit adequate at low cost. Standardizing on one refill source is cheaper and more consistent than repurchasing complete kits.
Will an "OSHA-compliant" label protect me in an OSHA inspection?
Not on its own. A label is a marketing claim, not a legal shield. What protects you is a kit genuinely matched to your hazards, kept stocked and in-date, backed by trained responders and any required eyewash, and documented with an inspection log. Treat "OSHA-compliant" as a claim to verify, not a guarantee to rely on.
What does the SKU 91247 identify?
It is First Aid Only's model number for this soft-sided 100-person workplace kit. Match the SKU 91247 and ASIN B08P28JYCR when reordering, because First Aid Only sells several kits at similar person ratings (such as the 50-person 91248), and a person rating alone does not tell you the container type or whether an explicit ANSI class is stated.
Reviewed by Steven Eaton, WC Safety. Specifications reflect the manufacturer's published listing (SKU 91247, ASIN B08P28JYCR). This kit is marketed as OSHA-compliant, but OSHA does not certify products and the listing does not name an explicit ANSI/ISEA Z308.1 Class A or B; we do not assert one on its behalf. Employers with a documented-compliance obligation should select a class-named kit, confirm current contents against the live listing, and match the kit to a workplace hazard assessment under 29 CFR 1910.151.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.