3M SecureFit Safety Glasses — ANSI Z87.1+ Self-Adjusting Temples
EDITORIAL REVIEW: 4.6/5 — WC Safety Review of the 3M SecureFit, the self-adjusting wraparound that fits a whole crew. Editorial assessment by Steven Eaton, WC Safety editor, based on published 3M specifications and ...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Editorial assessment by Steven Eaton, WC Safety editor, based on published 3M specifications and category fit. We did not laboratory-test this product.
The 3M SecureFit solves the one-size-fits-nobody problem with 3M Pressure-Diffusion Temple (PDT) technology that self-adjusts to different head sizes — the one 3M safety glass here that fits a diverse workforce without individual sizing. It's rated ANSI/ISEA Z87.1+ high-impact, with 3M Scotchgard Anti-Fog on Clear and Gray (anti-scratch on Indoor/Outdoor), and offers foam-gasket and Clear Bifocal reader options.
CHECK PRICE ON AMAZON → SHOP 3M SAFETY GLASSES →
As an Amazon Associate, WC Safety earns from qualifying purchases.
Why the 3M SecureFit fits a whole crew
A crew is a range of head shapes, and a fixed-fit frame that suits some wearers pinches or slides on others — so they push it up and work unprotected. The SecureFit's Pressure-Diffusion Temples flex and spread pressure to fit small and large heads alike, so one model sits right on nearly everyone. That simplifies stocking to a single SKU and raises the odds each worker wears it correctly, with Scotchgard Anti-Fog and gasket or bifocal options on top. Our full 3M SecureFit review rates it 4.6/5, and the safety glasses buyer's guide covers how fit drives compliance.
Safety first: a well-fitting frame protects better because it stays seated — but the SecureFit is impact-and-debris protection, not a sealed goggle. Even with the foam gasket it is not D3-rated against a chemical splash hazard, fine mist, or vapor, which require a D3 splash goggle or a face shield per your hazard assessment. Match the tint to the light too. Choose eyewear against measured hazards with the when-do-you-need-safety-glasses guide.
What the listing documents
From the published specs: ANSI/ISEA Z87.1+ high-impact rating; a wraparound frame with Pressure-Diffusion Temples (PDT) that self-adjust to head size; Scotchgard Anti-Fog on Clear and Gray, anti-scratch on Indoor/Outdoor; foam-gasket and Clear Bifocal options; base model SF401AF. As 3m safety glasses go, the SecureFit is the fit member — a genuine self adjusting safety glasses design and a true anti fog safety glasses on its Clear and Gray variants.
Choosing your SecureFit variant
Match the tint to the light: Clear from the clear-lens collection for indoor work, Gray for outdoor glare, and Indoor/Outdoor for shifting light from the I/O collection. The clear-vs-smoke lens guide settles the outdoor call, and the Scotchgard Anti-Fog variants pair with the anti-fog guide and anti-fog collection. For dusty work, add a foam-gasket variant or see the foam-lined collection.
Where the SecureFit sits in the 3M line
The 3M line splits by feature: this SecureFit is the self-adjusting fit frame, the budget Virtua AP is the bulk-buy, the Virtua CCS adds a built-in cord, and the premium Solus 1000 brings a sculpted anti-fog frame with an optional gasket. Browse the full 3M safety glasses collection, and the best safety glasses 2026 roundup places the line against other brands.
Where it fits by job and crew orders
Self-adjusting fit suits shared-pool eyewear and mixed crews across trades — the construction, manufacturing, and mechanics guides rank frames by task, and smaller-faced wearers should check the small-face guide and women's fit guide since the PDT temples help across sizes. Where the hazard exceeds impact — splash, dust, vapor — step to a sealed goggle from the safety goggles collection or the broader eye protection collection. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.
Reading the Z87 marking, and what it does not cover
Protective eyewear in the US is built to ANSI/ISEA Z87.1, and OSHA 1910.133 requires eye protection that meets it. The marking on the frame is the specification, and the important distinction is a single character: Z87 is basic impact, Z87+ is high impact — tested with a quarter-inch steel ball at 150 ft/s for spectacles. If the work throws anything, Z87+ is the line.
The suffixes narrow it further: D3 is splash and droplet, D4 dust, D5 fine dust. These matter because a spectacle cannot earn D3 — droplet protection needs a sealed goggle. Safety glasses are impact protection, not chemical splash protection, however wraparound the lens looks, and substituting one for the other is a common and consequential error.
A face shield is also secondary protection under 1910.133: it is worn over primary eye protection, never instead of it. And tint is not shade — a dark lens without a stated IR/UV shade number offers no rated protection against radiant energy.
Frequently asked questions
What is the 3M SecureFit?
A wraparound safety glass with 3M Pressure-Diffusion Temple (PDT) technology that self-adjusts to different head sizes, so one model fits a diverse workforce without individual sizing. It is ANSI/ISEA Z87.1+ rated with Scotchgard Anti-Fog on Clear and Gray, plus foam-gasket and bifocal options.
How do the self-adjusting temples work?
Pressure-Diffusion Temple technology lets the temple arms flex and spread pressure across a range of head sizes, so the same frame sits comfortably and securely whether the wearer has a small or large head - no individual sizing or multiple SKUs to stock.
Why does self-adjusting fit matter for a crew?
A crew has many head shapes, and a frame that fits some and pinches others gets pushed up and worn wrong. One self-adjusting model fits nearly everyone, which simplifies stocking and improves the odds each worker wears it correctly all shift.
Is it ANSI Z87.1+ rated?
Yes - the SecureFit carries the ANSI/ISEA Z87.1+ high-impact rating (the '+' marks passing the high-velocity and high-mass impact tests), so it meets the requirement for most industrial eye hazards.
Which variants have anti-fog?
The Clear and Gray variants carry 3M Scotchgard Anti-Fog; the Indoor/Outdoor variant uses an anti-scratch coating. For humid work choose Clear or Gray Scotchgard Anti-Fog.
Does the SecureFit have a foam-gasket or bifocal option?
Yes - foam-gasket variants (the -FM codes) add a dust seal, and the BF48 adds a bifocal reader segment. You can combine the self-adjusting fit with either feature depending on your task.
What tints does it come in?
Clear, Gray, and Indoor/Outdoor, plus a Clear Bifocal reader. Match the tint to your light - Clear indoors, Gray outdoors, Indoor/Outdoor for shifting light.
Is it over-the-glasses (OTG)?
No - the SecureFit is not an OTG frame. Prescription-glasses wearers should look at an over-the-glasses model, or use the bifocal option if a reader segment is enough.
Is it enough, or do I need goggles?
The SecureFit protects against impact and debris from the front and sides. Even with the foam gasket it is not a sealed splash goggle - a chemical splash hazard, fine dust, or vapor needs a D3-rated goggle or a face shield. Match the eyewear to your hazard assessment.
Is the SecureFit good for shared or pool eyewear?
Yes - because it self-adjusts to different heads, it's well suited to shared-pool and multi-shift eyewear where one pair may pass between wearers of different sizes.
How do I care for the lenses?
Rinse grit before wiping and use a microfiber or lens-safe cloth; harsh cleaners strip the Scotchgard Anti-Fog coating. Retire a lens once scratches enter your line of sight - a scratched safety lens no longer protects fully.
How do I order for a crew?
Quantity purchasing runs through a free Amazon Business account - volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations. The bulk-ordering walkthrough is linked in our site footer.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.