MSA V-Gard Full Brim Hard Hat Review

MSA V-Gard Full Brim Hard Hat Review

The MSA V-Gard Full Brim extends the same HDPE shell and Class E electrical protection of the iconic V-Gard to a 360-degree brim configuration. The full brim adds front, rear, and side coverage for sun and rain — the preferred configuration for outdoor workers in construction, roofing, and utilities. It retains MSA's Fas-Trac III ratchet suspension, ANSI Z89.1 Type I, Class E certification, and the widest accessory compatibility in the industry.

VIEW ON WC SAFETY →

Quick Verdict

Specifications

Pros & Cons

Who Should Buy the MSA V-Gard Full Brim?

Choose the MSA V-Gard Full Brim over the cap style when your work is primarily outdoors and you need sun/rain protection on all sides. The full brim sheds rain away from the face and neck, provides UV shading for the ears and neck, and improves comfort during extended outdoor shifts. Electricians and utility workers who work outdoors consistently often prefer the full brim for this reason while retaining the Class E protection. See cap style vs full brim comparison for the full decision guide.

Other MSA Hard Hats

• MSA V-Gard Cap Style
• MSA V-Gard H2 Full Brim Safety Helmet (Type II)
• MSA Skullgard Full Brim (high-heat environments)

See also: Cap Style vs Full Brim: Which is Right for Your Job?

Frequently Asked Questions

What ANSI rating does the MSA V-Gard Full Brim have?

The MSA V-Gard Full Brim is certified to ANSI/ISEA Z89.1 Type I, Class E. Type I means the hard hat provides top impact protection only (no lateral impact protection). Class E means the hard hat provides electrical protection up to 20,000 volts and is suitable for electrical trade and utility work.

Is the MSA V-Gard Full Brim safe for electrical work?

Yes — the MSA V-Gard Full Brim is rated Class E, which provides up to 20,000 volts (20 kV) of electrical protection per ANSI/ISEA Z89.1. This is the highest electrical protection class for hard hats and is required for most electrical trade, utility, and high-voltage environments.

What suspension type does the MSA V-Gard Full Brim use?

The MSA V-Gard Full Brim uses a 4-point Fas-Trac III ratchet or Staz-On pin-lock. A ratchet suspension allows quick, tool-free head size adjustment — turn the ratchet knob at the rear to dial in your fit. This is the most ergonomic and widely used suspension type in industrial hard hats.

What is the weight of the MSA V-Gard Full Brim?

The MSA V-Gard Full Brim weighs approximately ~15 oz. For a traditional HDPE hard hat, this is within the normal range. Lighter alternatives include carbon fiber and composite fiber resin hard hats.

How long does a MSA V-Gard Full Brim hard hat last?

Per ANSI/ISEA Z89.1 and MSA's manufacturer guidelines, the V-Gard Full Brim shell should be replaced within 5 years of the date of manufacture (stamped inside the shell). The suspension should be replaced every 12 months regardless of appearance, or sooner if it shows signs of cracking, fraying, or deformation. Exposure to UV radiation, chemicals, and extreme temperatures accelerates degradation — inspect the shell monthly for crazing, dull finish, or cracks. Replace immediately after any impact event.

Is the MSA V-Gard Full Brim Type I or Type II?

The MSA V-Gard Full Brim is Type I. Type I hard hats protect from impacts to the top of the head only. This is the traditional industrial hard hat standard and is appropriate for most general construction and industrial environments where lateral impact risk is low.

What is the difference between a hard hat and a safety helmet?

A traditional hard hat (see all hard hats) typically has a flat-top HDPE shell with a suspension system and meets ANSI Z89.1 Type I or Type II. A safety helmet (see all safety helmets) has a rounded dome profile similar to a climbing or bicycle helmet, typically provides Type II (lateral impact) protection, and often integrates accessories like visors and ear defenders into the shell design. The MSA V-Gard Full Brim is a traditional hard hat — it follows the traditional hard hat format.

What does ANSI Z89.1 Class E mean?

ANSI Z89.1 Class E means the hard hat shell (not the suspension) has been tested to withstand 20,000 volts (20 kV) of electrical potential without conduction. This is required for electrical trade, utility, and any environment with live electrical hazards above 2,200 volts. Class E is the highest electrical rating for hard hats. Note: the class rating applies to the shell only — never apply stickers, paint, or alterations that could reduce electrical insulation properties.

How often should a hard hat be replaced?

ANSI/ISEA Z89.1 recommends replacing the hard hat shell within 5 years from the date of manufacture, and the suspension within 12 months from first use. Always replace a hard hat immediately after any significant impact — even if no visible damage appears, the shell's energy-absorbing capacity may be compromised. The manufacture date is stamped inside the shell in a clock-format (the arrow points to the month, the year is printed). See the hard hat selection guide for the full replacement interval guidelines.

What is the difference between a ratchet and a pin-lock hard hat suspension?

A ratchet suspension (like the Fas-Trac III in the MSA V-Gard Full Brim) allows quick, tool-free head size adjustment via a dial at the rear — faster and more comfortable for workers who share hard hats across shifts. A pin-lock suspension requires removing the hard hat and manually repositioning pins to adjust size — simpler but less convenient. Most industrial buyers prefer ratchet suspensions for comfort and compliance. See the hard hat selection guide for suspension comparison.

Can I wear a hard hat in the rain?

Yes — hard hats including the MSA V-Gard Full Brim are designed for outdoor industrial use including rain exposure. HDPE and other shell materials are water-resistant. However, if your hard hat has ventilation slots (vented hard hats), rain can enter the vents and reach your head. For sustained rain exposure, a full brim hard hat provides 360-degree brim protection for face, neck, and ears. Vented hard hats sacrifice rain protection for airflow — choose based on your primary work environment.

Is the MSA V-Gard Full Brim good for construction?

Yes — the MSA V-Gard Full Brim is a well-established choice for general construction. Type I and Class E certification covers the most common construction site requirements. For job sites that require ANSI Type II lateral impact protection, consider a safety helmet-style alternative. See best hard hat for construction guide for full construction site picks.

Where can I buy the MSA V-Gard Full Brim?

The MSA V-Gard Full Brim is available at MSA V-Gard Full Brim on WC Safety. For the full range of MSA hard hat options, see the hard hats collection.

What accessories are compatible with this hard hat?

Most MSA hard hats use the standard brim-slot accessory mounting system compatible with MSA-brand faceshields, earmuff adapters, sweatbands, chin straps, and cap lamp brackets. Always verify accessory compatibility against the specific hard hat model — not all accessories fit all models. See the head protection collection for compatible accessories.

How does the MSA V-Gard Full Brim compare to other hard hats?

The MSA V-Gard Full Brim occupies the mid-range segment. For head-to-head comparisons with competing models, see best hard hat for construction and the related guides linked above.