MCR Safety 9277PUS CutPro A7 Hi-Vis PU Gloves — Small Review (2026)
safety 9277pus cutpro a7 hi-vis pu gloves — small review: the short answer
Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
★★★★½ 4.5/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | MCR Safety |
|---|---|
| Category | Cut Resistant Gloves |
| Model / SKU | 9277PUS |
The MCR Safety 9277PUS CutPro A7 Hi-Vis PU Gloves — Small is a cut resistant gloves from MCR Safety, listed. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.
What the Product Page Documents
Published · Last updated
The MCR Safety 9277PUS CutPro A7 Hi-Vis PU Gloves in Small raise the bar on high-cut-protection hand safety by adding high-visibility yellow coloring to ANSI/ISEA 105 A7-rated cut resistance — a combination that directly addresses compliance visibility requirements in facilities with strict PPE audit programs. Built on a 13-gauge HyperMax HPPE shell with a polyurethane palm coating, SKU 9277PUS delivers protection against serious cutting hazards while ensuring that gloves are visually identifiable as worn at a distance — critical for safety supervisors managing compliance across large production floors, fabrication bays, and assembly operations.
High-visibility PPE has become a significant topic in industrial safety management over the past decade. OSHA and industry best practices increasingly recommend or require that certain categories of PPE be visually distinctive — so that safety supervisors, line managers, and safety auditors can confirm compliance at a glance without halting production for individual equipment checks. The 9277PUS applies this principle to cut-resistant gloves, pairing A7-level cut protection with a hi-vis yellow shell that stands out on any production floor or fabrication bay.
A7 cut resistance means the glove shell withstands between 4,000 and 5,999 grams of blade force — placing it in the upper tier of the ANSI/ISEA 105 cut resistance scale, well above the A4 rating that covers most general industrial environments. For workers handling architectural glass, precision sheet metal, razor blades, industrial cutting tools, or high-speed rotating cutters, A7 protection provides a meaningful additional safety margin compared to lower-rated alternatives. The 13-gauge HyperMax HPPE shell achieves this A7 rating while maintaining a close-fitting, dexterous profile suitable for precision production tasks.
Where It Earns Its Slot
Where it earns its slot: The MCR Safety 9277PUS CutPro A7 Hi-Vis PU Gloves in Small raise the bar on high-cut-protection hand safety by adding high-visibility yellow coloring to ANSI/ISEA 105 A7-rated cut resistance — a combination that directly. Everything below measures the product against that role: its honest limits, its true alternatives, and where the linked guides rank it.
Honest Limits
Honest limits: glove ratings are per-hazard, not general toughness. Cut, puncture, abrasion, chemical, and thermal performance are separate tests, and this glove protects only on the axes its marking actually covers. Inspect for breaches and retire on damage — degraded gloves protect on paper only.
Pros and Cons
Pros
- Documented cut resistant gloves from MCR Safety
- Model 9277PUS — traceable part number
- Listing-grounded specs — nothing invented here
Cons
- Configuration options live on the linked listing
- Where the listing is silent on a rating, verify the physical markings
Alternatives in the Same Lane
- SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
- MCR Safety PD6901 Predator Impact Gloves
- MCR Safety PD4900 Predator Impact Gloves
- MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
- MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
- MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
- MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
- MCR Safety PD4971 Predator Impact Gloves
- MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im
Hand Protection Guides
- Cut-Resistant Gloves Complete Guide
- Best Cut-Resistant Gloves
- Best Impact-Resistant Gloves
- Nitrile Gloves Complete Guide
- Best Mechanics Gloves
Browse by Category
- Cut-Resistant Gloves
- Impact-Resistant Gloves
- Nitrile Gloves
- Leather Work Gloves
- Chemical-Resistant Gloves
- Mechanics Gloves
The Bottom Line
Rated 4.5/5 on documented spec, configuration, and value. The MCR Safety 9277PUS CutPro A7 Hi-Vis PU Gloves — Small does the job its listing describes — the guides above tell you whether it's the right pick against the field.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates hand protection equipment for industrial and construction buyers.
How We Review
Hand-protection reviews restate ANSI/ISEA 105 cut levels, ANSI/ISEA 138 impact levels, and mil thicknesses exactly as each listing states them — never inferred from appearance or price. Where a listing claims no level, the review says so and treats the glove as unrated for that hazard. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Primary sources for this page
The wording behind this page sits in OSHA 29 CFR 1910.138, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.
Why trust this page?
Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.
Methodology: how this page is maintained
Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.
More questions on this topic
How much does the MCR Safety 9277PUS CutPro A7 Hi-Vis PU Gloves — Small cost?
at the linked listing — prices track the live page, and configuration choices there can shift the number.
What does the MCR Safety 9277PUS CutPro A7 Hi-Vis PU Gloves — Small listing actually document?
The MCR Safety 9277PUS CutPro A7 Hi-Vis PU Gloves in Small raise the bar on high-cut-protection hand safety by adding high-visibility yellow coloring to ANSI/ISEA 105 A7-rated cut resistance — a combination that directly addresses compliance visibility requirements in facilities with strict PPE audi…
What are the alternatives to the MCR Safety 9277PUS CutPro A7 Hi-Vis PU Gloves — Small?
The sibling cut resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.
Leave a comment