MCR Safety 92752PUS CutPro A5 PU Coated Gloves — Small Review (2026)
safety 92752pus cutpro a5 pu coated gloves — small review: the short answer
Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
★★★★½ 4.5/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | MCR Safety |
|---|---|
| Category | Cut Resistant Gloves |
| Model / SKU | 92752PUS |
The MCR Safety 92752PUS CutPro A5 PU Coated Gloves — Small is a cut resistant gloves from MCR Safety, listed. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.
What the Product Page Documents
Published · Last updated
The MCR Safety 92752PUS CutPro A5 PU Coated Gloves in Small deliver ANSI/ISEA 105 A5 cut protection with a thin polyurethane palm coating engineered for precision assembly, parts handling, and light fabrication tasks where workers need genuine cut resistance without sacrificing fingertip sensitivity. Built on a 13-gauge HyperMax HPPE shell, the 92752PU series meets the A5 cut level while remaining thin and flexible enough for tasks requiring fine motor control — circuit board handling, small parts assembly, quality inspection, and light sheet metal work. The Small sizing ensures proper fit for hands measuring approximately 7 inches in circumference, eliminating the excess material at the fingertips that degrades both dexterity and safety in cut-hazard environments.
The MCR Safety 92752PU series occupies an important position in cut-protection glove programs: it provides genuine A5 cut resistance — strong enough for sheet metal handling, metal parts assembly, and light fabrication — in a glove thin and sensitive enough for the detailed work that many A5 hazard environments require.
A5 cut resistance is appropriate for a broad range of industrial applications including light metal stamping parts handling, automotive component assembly, electronics manufacturing involving sheet metal chassis, and quality inspection of machined parts. The ANSI/ISEA 105 A5 level requires the glove to withstand a minimum of 2,200 grams of cut force on the TDM-100 test blade — meaningful protection against the types of cuts that occur when a worker's hand contacts a sharp sheet metal edge, machined part burr, or exposed fastener under pressure.
Where It Earns Its Slot
Where it earns its slot: The MCR Safety 92752PUS CutPro A5 PU Coated Gloves in Small deliver ANSI/ISEA 105 A5 cut protection with a thin polyurethane palm coating engineered for precision assembly, parts handling, and light fabrication tasks whe. The sections below test that positioning against the documented configuration, not against wishful thinking.
Honest Limits
Its boundaries are the category's: protection is limited to the rated hazards at the rated levels, chemical exposure is governed by breakthrough time rather than resistance in the abstract, and fit determines whether any of it reaches the hand. Verify the marking against the task before relying on it.
Pros and Cons
Pros
- Documented cut resistant gloves from MCR Safety
- Model 92752PUS — traceable part number
- Listing-grounded specs — nothing invented here
Cons
- Configuration options live on the linked listing
- Where the listing is silent on a rating, verify the physical markings
Alternatives in the Same Lane
- SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
- MCR Safety PD6901 Predator Impact Gloves
- MCR Safety PD4900 Predator Impact Gloves
- MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
- MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
- MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
- MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
- MCR Safety PD4971 Predator Impact Gloves
- MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im
Hand Protection Guides
- Cut-Resistant Gloves Complete Guide
- Best Cut-Resistant Gloves
- Best Impact-Resistant Gloves
- Nitrile Gloves Complete Guide
- Best Mechanics Gloves
Browse by Category
- Cut-Resistant Gloves
- Impact-Resistant Gloves
- Nitrile Gloves
- Leather Work Gloves
- Chemical-Resistant Gloves
- Mechanics Gloves
The Bottom Line
Rated 4.5/5 on documented spec, configuration, and value. The MCR Safety 92752PUS CutPro A5 PU Coated Gloves — Small does the job its listing describes — the guides above tell you whether it's the right pick against the field.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates hand protection equipment for industrial and construction buyers.
How We Review
Hand-protection reviews restate ANSI/ISEA 105 cut levels, ANSI/ISEA 138 impact levels, and mil thicknesses exactly as each listing states them — never inferred from appearance or price. Where a listing claims no level, the review says so and treats the glove as unrated for that hazard. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Primary sources for this page
The wording behind this page sits in OSHA 29 CFR 1910.138, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.
Why trust this page?
Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.
Methodology: how this page is maintained
Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.
More questions on this topic
How much does the MCR Safety 92752PUS CutPro A5 PU Coated Gloves — Small cost?
at the linked listing — prices track the live page, and configuration choices there can shift the number.
What does the MCR Safety 92752PUS CutPro A5 PU Coated Gloves — Small listing actually document?
The MCR Safety 92752PUS CutPro A5 PU Coated Gloves in Small deliver ANSI/ISEA 105 A5 cut protection with a thin polyurethane palm coating engineered for precision assembly, parts handling, and light fabrication tasks where workers need genuine cut resistance without sacrificing fingertip sensitivity…
What are the alternatives to the MCR Safety 92752PUS CutPro A5 PU Coated Gloves — Small?
The sibling cut resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.
Leave a comment