MCR Safety 92752-XXS CutPro A5 Polyurethane-Coated Gloves — XX-Small Review (2026)
cutpro a5 polyurethane-coated gloves — xx-small review: the short answer
Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
★★★★½ 4.5/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | MCR Safety |
|---|---|
| Category | Cut-Resistant Gloves |
| Model / SKU | 92752-XXS |
The MCR Safety 92752-XXS CutPro A5 Polyurethane-Coated Gloves — XX-Small is a cut-resistant gloves from MCR Safety, listed. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.
What the Product Page Documents
Published · Last updated
For XX-Small-handed workers in precision electronics, semiconductor, dental laboratory, and specialized precision manufacturing applications where ANSI/ISEA 105 Level A5 cut resistance is required in the smallest possible glove format, the MCR Safety 92752-XXS CutPro A5 Polyurethane-Coated Gloves in XX-Small ( SKU: 92752-XXS ) provide A5-rated hand protection for hand circumferences under 6 inches. The 13-gauge HyperMax HPPE shell with clear polyurethane palm coating delivers cut resistance and precision grip in the most compact form factor available in the CutPro series, enabling full PPE compliance for the smallest-handed members of precision assembly and manufacturing workforces.
The XX-Small size in industrial cut-resistant gloves serves a small but real segment of precision manufacturing workforces — workers whose hand circumferences fall below the X-Small range covered by standard small-size gloves. This demographic includes some female workers with hands below average for the female distribution, workers in some international manufacturing markets where the workforce hand size distribution includes a measurable XX-Small segment, and specialized precision applications like dental laboratory technicians, microsurgery support, and advanced optics handling where the precision instrument dimensions demand the tightest-fitting hand protection available.
Engineering a reliable A5-rated cut-resistant glove at XX-Small presents the most challenging manufacturing requirements in the CutPro size range. The palm width and finger barrel dimensions are reduced to the point where yarn tension management becomes extremely precise — too tight and the knit restricts circulation; too loose and the fiber density drops below A5 requirements at the tested measurement points. MCR Safety's XX-Small pattern uses a tension specification developed specifically for this size with test-validated A5 compliance, not simply assumed from larger-size results. The PU coating at XX-Small is also applied at a calibrated thickness that provides consistent grip performance without over-coating the fine-gauge knit, which would stiffen the glove and reduce the dexterity advantage of the XX-Small size.
Where It Earns Its Slot
Where it earns its slot: For XX-Small-handed workers in precision electronics, semiconductor, dental laboratory, and specialized precision manufacturing applications where ANSI/ISEA 105 Level A5 cut resistance is required in the smallest possibl. The rest of this review holds the listing to exactly that brief — limits, alternatives, and the ranked guides included.
Honest Limits
The ratings are task-specific and so are the limits: a cut level says nothing about chemical breakthrough, an abrasion score nothing about heat, and no glove rating survives the wrong size — a loose glove is a snag hazard and a tight one comes off. Match the marking to the assessed hazard, not to the biggest number.
Pros and Cons
Pros
- Documented cut-resistant gloves from MCR Safety
- Model 92752-XXS — traceable part number
- Listing-grounded specs — nothing invented here
Cons
- Configuration options live on the linked listing
- Where the listing is silent on a rating, verify the physical markings
Alternatives in the Same Lane
- SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
- MCR Safety PD6901 Predator Impact Gloves
- MCR Safety PD4900 Predator Impact Gloves
- MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
- MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
- MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
- MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
- MCR Safety PD4971 Predator Impact Gloves
- MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im
Hand Protection Guides
- Cut-Resistant Gloves Complete Guide
- Best Cut-Resistant Gloves
- Best Impact-Resistant Gloves
- Nitrile Gloves Complete Guide
- Best Mechanics Gloves
Browse by Category
- Cut-Resistant Gloves
- Impact-Resistant Gloves
- Nitrile Gloves
- Leather Work Gloves
- Chemical-Resistant Gloves
- Mechanics Gloves
The Bottom Line
Rated 4.5/5 on documented spec, configuration, and value. The MCR Safety 92752-XXS CutPro A5 Polyurethane-Coated Gloves — XX-Small does the job its listing describes — the guides above tell you whether it's the right pick against the field.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates hand protection equipment for industrial and construction buyers.
How We Review
Hand-protection reviews restate ANSI/ISEA 105 cut levels, ANSI/ISEA 138 impact levels, and mil thicknesses exactly as each listing states them — never inferred from appearance or price. Where a listing claims no level, the review says so and treats the glove as unrated for that hazard. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Primary sources for this page
The wording behind this page sits in OSHA 29 CFR 1910.138, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.
Why trust this page?
Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.
Methodology: how this page is maintained
Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.
More questions on this topic
How much does the MCR Safety 92752-XXS CutPro A5 Polyurethane-Coated Gloves — cost?
at the linked listing — prices track the live page, and configuration choices there can shift the number.
What does the MCR Safety 92752-XXS CutPro A5 Polyurethane-Coated Gloves — listing actually document?
For XX-Small-handed workers in precision electronics, semiconductor, dental laboratory, and specialized precision manufacturing applications where ANSI/ISEA 105 Level A5 cut resistance is required in the smallest possible glove format, the MCR Safety 92752-XXS CutPro A5 Polyurethane-Coated Gloves in…
What are the alternatives to the MCR Safety 92752-XXS CutPro A5 Polyurethane-Coated Gloves — ?
The sibling cut-resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.
Leave a comment