MCR Safety 92752 CutPro A5 Polyurethane-Coated Gloves Review (2026)

safety 92752 cutpro a5 polyurethane-coated gloves review: the short answer

Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The MCR Safety 92752 CutPro A5 Polyurethane-Coated Gloves is a cut-resistant gloves from MCR Safety, listed. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

For X-Small-handed workers in precision electronics assembly, pharmaceutical production, semiconductor handling, and fine-motor inspection operations who require ANSI/ISEA 105 Level A5 cut resistance without sacrificing dexterity, the MCR Safety 92752-XS CutPro A5 Polyurethane-Coated Gloves in X-Small ( SKU: 92752-XS ) provide a properly patterned A5-rated solution for workers whose hand circumferences fall in the 6–7 inch range. The 13-gauge HyperMax HPPE shell and clear polyurethane palm coating deliver cut resistance and precision grip in the smallest standard size in the CutPro series, ensuring that even the smallest-handed workers in precision manufacturing environments receive the same protection level as the broader workforce.

X-Small is the least commonly stocked size in industrial cut-resistant glove programs, yet the absence of X-Small inventory creates a compliance gap that disproportionately affects specific workforce demographics: female workers with smaller-than-average hands, and operations in Southeast Asian manufacturing markets where workforce hand size distributions skew significantly smaller than North American averages. The 92752-XS addresses this gap by providing a genuinely X-Small-patterned glove — not a stretched Small — with the full A5 performance profile and the fine-gauge construction that X-Small hands require for effective dexterity in precision tasks.

The engineering challenge of an X-Small A5 cut-resistant glove is maintaining the fiber tension required for consistent A5 protection across a narrower palm width and shorter finger barrel dimensions without the knit construction becoming too tight for comfortable wear. The 13-gauge HyperMax HPPE specification for the X-Small size uses a tension calibration that maintains A5 protection across the hand surface while allowing the range of motion required for precision assembly tasks. This balance is harder to achieve at X-Small than at larger sizes because the geometric tolerances are tighter — small variations in fiber placement have larger proportional effects at smaller scales.

Where It Earns Its Slot

Where it earns its slot: For X-Small-handed workers in precision electronics assembly, pharmaceutical production, semiconductor handling, and fine-motor inspection operations who require ANSI/ISEA 105 Level A5 cut resistance without sacrificing . The sections below test that positioning against the documented configuration, not against wishful thinking.

Honest Limits

The ratings are task-specific and so are the limits: a cut level says nothing about chemical breakthrough, an abrasion score nothing about heat, and no glove rating survives the wrong size — a loose glove is a snag hazard and a tight one comes off. Match the marking to the assessed hazard, not to the biggest number.

Pros and Cons

Alternatives in the Same Lane

• SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

The Bottom Line

Rated 4.6/5 on documented spec, configuration, and value. The MCR Safety 92752 CutPro A5 Polyurethane-Coated Gloves does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Primary sources for this page

The wording behind this page sits in OSHA 29 CFR 1910.138, OSHA 29 CFR 1910.132.

Why trust this page?

Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.

Methodology: how this page is maintained

Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.

More questions on this topic

How much does the MCR Safety 92752 CutPro A5 Polyurethane-Coated Gloves cost?

at the linked listing — prices track the live page, and configuration choices there can shift the number.

What does the MCR Safety 92752 CutPro A5 Polyurethane-Coated Gloves listing actually document?

For X-Small-handed workers in precision electronics assembly, pharmaceutical production, semiconductor handling, and fine-motor inspection operations who require ANSI/ISEA 105 Level A5 cut resistance without sacrificing dexterity, the MCR Safety 92752-XS CutPro A5 Polyurethane-Coated Gloves in X-Sma…

What are the alternatives to the MCR Safety 92752 CutPro A5 Polyurethane-Coated Gloves?

The sibling cut-resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.