MCR Safety 9273SPU CutPro A9 Sandy PU Cut-Resistant Gloves Review (2026)
9273spu cutpro a9 sandy pu cut-resistant gloves review: the short answer
Short answer: Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
★★★★½ 4.5/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | MCR Safety |
|---|---|
| Category | Cut-Resistant Gloves |
| Model / SKU | 9273SPU-XS |
The MCR Safety 9273SPU CutPro A9 Sandy PU Cut-Resistant Gloves is a cut-resistant gloves from MCR Safety, listed. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.
What the Product Page Documents
Published · Last updated
The MCR Safety 9273SPU-XS CutPro A9 Sandy Polyurethane Cut-Resistant Gloves in X-Small deliver the highest ANSI/ISEA 105 A9 cut-resistance rating in a precision-fit shell engineered for smaller hands working in food processing, pharmaceutical manufacturing, and precision glass handling. Built on a 13-gauge HyperMax HPPE fiber shell with an FDA-accepted sandy polyurethane palm coating, SKU: 9273SPU-XS provides exceptional tactile sensitivity alongside extreme cut protection — critical for workers who cannot compromise dexterity on fine-detail tasks. This glove is the choice of safety managers who need documented, third-party-verified cut protection at the A9 level without sacrificing the fit required for X-Small hand sizes.
MCR Safety's CutPro line represents the company's benchmark cut-protection technology, and the 9273SPU series takes that foundation to its maximum rated performance. The 13-gauge knit density means more fibers per square inch compared to standard 10- or 15-gauge alternatives, creating a tighter mechanical barrier between blade and skin. HyperMax HPPE is engineered to resist cutting forces that would shred conventional HPPE, making it the appropriate choice when hazard assessments identify high-frequency sharp-edge contact — stamped metal parts, tempered glass panels, precision-cut pharmaceutical components, or razor-edged packaging materials.
The sandy polyurethane coating is applied to the full palm and fingers, stopping short of a breathable knit back that keeps hands cooler during extended wear. The "sandy" texture is not merely cosmetic — the micro-granular surface geometry creates dozens of small contact points per square centimeter, dramatically improving grip security on flat, smooth, or lightly lubricated surfaces compared to a smooth PU coating. For workers handling glass panes, metal substrates, or pharmaceutical blister packs, this grip profile translates directly to fewer dropped items and lower product damage rates.
Where It Earns Its Slot
Where it earns its slot: The MCR Safety 9273SPU-XS CutPro A9 Sandy Polyurethane Cut-Resistant Gloves in X-Small deliver the highest ANSI/ISEA 105 A9 cut-resistance rating in a precision-fit shell engineered for smaller hands working in food proc. Everything below measures the product against that role: its honest limits, its true alternatives, and where the linked guides rank it.
Honest Limits
Its boundaries are the category's: protection is limited to the rated hazards at the rated levels, chemical exposure is governed by breakthrough time rather than resistance in the abstract, and fit determines whether any of it reaches the hand. Verify the marking against the task before relying on it.
Pros and Cons
Pros
- Documented cut-resistant gloves from MCR Safety
- Model 9273SPU-XS — traceable part number
- Listing-grounded specs — nothing invented here
Cons
- Configuration options live on the linked listing
- Where the listing is silent on a rating, verify the physical markings
Alternatives in the Same Lane
- SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
- MCR Safety PD6901 Predator Impact Gloves
- MCR Safety PD4900 Predator Impact Gloves
- MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
- MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
- MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
- MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
- MCR Safety PD4971 Predator Impact Gloves
- MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im
Hand Protection Guides
- Cut-Resistant Gloves Complete Guide
- Best Cut-Resistant Gloves
- Best Impact-Resistant Gloves
- Nitrile Gloves Complete Guide
- Best Mechanics Gloves
Browse by Category
- Cut-Resistant Gloves
- Impact-Resistant Gloves
- Nitrile Gloves
- Leather Work Gloves
- Chemical-Resistant Gloves
- Mechanics Gloves
The Bottom Line
Rated 4.5/5 on documented spec, configuration, and value. The MCR Safety 9273SPU CutPro A9 Sandy PU Cut-Resistant Gloves does the job its listing describes — the guides above tell you whether it's the right pick against the field.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates hand protection equipment for industrial and construction buyers.
How We Review
Hand-protection reviews restate ANSI/ISEA 105 cut levels, ANSI/ISEA 138 impact levels, and mil thicknesses exactly as each listing states them — never inferred from appearance or price. Where a listing claims no level, the review says so and treats the glove as unrated for that hazard. Ratings reflect documented spec, configuration, and value — the basis is stated, not invented testing.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Primary sources for this page
The wording behind this page sits in OSHA 29 CFR 1910.138, OSHA 29 CFR 1910.132, NIOSH Personal Protective Equipment.
Why trust this page?
Why trust this page? Every figure on it is taken from the published text of the standard or the manufacturer document named beside it, not from a secondary summary. WC Safety is an independent PPE review site: we hold no inventory and sell nothing directly, so there is no product we need this page to favour. Where sources disagree, the page says so and plans on the more conservative figure rather than picking one.
Methodology: how this page is maintained
Methodology. Figures are read from the primary source and re-checked whenever the underlying standard or a manufacturer document changes. No laboratory testing is performed for this page. Where a figure is not published, the page states that rather than estimating it, because a plausible invented number is more dangerous than an absent one.
More questions on this topic
How much does the MCR Safety 9273SPU CutPro A9 Sandy PU Cut-Resistant Gloves cost?
at the linked listing — prices track the live page, and configuration choices there can shift the number.
What does the MCR Safety 9273SPU CutPro A9 Sandy PU Cut-Resistant Gloves listing actually document?
The MCR Safety 9273SPU-XS CutPro A9 Sandy Polyurethane Cut-Resistant Gloves in X-Small deliver the highest ANSI/ISEA 105 A9 cut-resistance rating in a precision-fit shell engineered for smaller hands working in food processing, pharmaceutical manufacturing, and precision glass handling. Built on a 1…
What are the alternatives to the MCR Safety 9273SPU CutPro A9 Sandy PU Cut-Resistant Gloves?
The sibling cut-resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.
Leave a comment