MCR Safety 48406K Welding Impact Gloves Review

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The MCR Safety 48406K Welding Gloves, Goatskin Kevlar-Lined MIG/TIG (Impact) is an impact-rated welding glove from MCR Safety, listed on Amazon. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

Published July 16, 2026 · Last updated July 27, 2026

Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.

As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure .

The MCR Safety 48406K welding gloves pair welding-grade heat and spark protection with cut and impact resistance in a dexterous goatskin build. A premium grain goatskin shell gives the tactile feel MIG and TIG work demand, a DuPont Kevlar lining adds heat and cut resistance, Kevlar thread holds the seams against heat and wear, and a hi-vis TPR back of hand and fingers provides ANSI/ISEA 138 Level 1 impact protection.

Where It Earns Its Slot

Where it earns its slot: it is the only impact-rated (ANSI/ISEA 138 Level 1 back-of-hand) welding glove in the lineup — grain goatskin dexterity with DuPont Kevlar lining and TPR knuckle protection for rigging-adjacent hot work.

Honest Limits

The ratings are task-specific and so are the limits: a cut level says nothing about chemical breakthrough, an abrasion score nothing about heat, and no glove rating survives the wrong size — a loose glove is a snag hazard and a tight one comes off. Match the marking to the assessed hazard, not to the biggest number.

Pros and Cons

Alternatives in the Same Lane

• Lincoln K3806 DynaMIG HD
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

Frequently Asked Questions

General questions about ratings, OSHA limits and fit are answered in the Cut-Resistant Gloves Complete Guide guide.

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The MCR Safety 48406K Welding Gloves, Goatskin Kevlar-Lined MIG/TIG does the job its listing describes — the guides above tell you whether it's the right pick against the field.

Common questions

What does the MCR Safety 48406K Welding Gloves, Goatskin Kevlar-Lined MIG/ listing actually document?

Editorial assessment by Steven Eaton, WC Safety editor, based on published MCR Safety specifications and category fit. We did not laboratory-test this product.…

What are the alternatives to the MCR Safety 48406K Welding Gloves, Goatskin Kevlar-Lined MIG/?

The sibling impact-resistant gloves options linked in this review, ranked head-to-head in the hand protection guides below — start with the buyer's guides for the field view.

Do welding gloves carry cut or heat ratings like work gloves?

Usually not - plain leather welding gloves are typically sold without ANSI/ISEA 105 cut or heat numbers. Treat any published figure as the manufacturer's comparative claim, not a duration promise, and pick by process weight first.

Is a thicker welding glove always the safer glove?

No. Too much glove wrecks torch and filler control, and a fumbled hot part is its own hazard. Match thickness to the process: thin goatskin for TIG, midweight cowhide for MIG, heavy split leather for stick and gouging.

Sources. Requirements referenced here come from OSHA 29 CFR 1910 and the NIOSH recommendations. Where a consensus standard governs, the ANSI document is named in the text.

Related reference

Closely related on this site: welding helmets complete guide, best welding gloves, best welding helmets for mig welding, and best welding helmets for tig welding.

Why trust WC Safety

WC Safety is an independent, affiliate-supported review site. It is not a retailer: it holds no inventory, takes no orders, and earns only from qualifying purchases through clearly marked links — which never changes what a product is rated to do. Standards language is taken from the regulation text directly, and ratings are reported as the manufacturer publishes them. We run no laboratory and perform no testing of our own. Where published sources disagree, we say so and plan on the conservative figure rather than the flattering one.

Our methodology

Figures come from the regulation and the published specification, in that order. Derated numbers are calculated, not estimated. Nothing here is presented as a measured result, because we measure nothing.

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers and regulators publish, with the gaps in that record marked. Last reviewed August 2026.