Magid Y50 Safety Glasses ANSI Z87 1 Review

Is the MAGID Y50 Safety Glasses ANSI Z87.1+ the right eye protection for construction, utility, and manufacturing environments that require OSHA-compliant side protection?

Published June 10, 2026 · Last updated July 25, 2026

Short answer: Yes — the MAGID Y50 is a solid, budget-friendly choice for workers who need verified ANSI Z87.1+ high-impact protection with integrated side shields and anti-fog coating. It fits best on construction sites, utility crews, and manufacturing floors where OSHA 29 CFR 1910.133 side-protection requirements apply. If you need polarized lenses for outdoor glare or a full-seal against dust and chemical splash, consider the DEWALT DPG109 or a sealed-goggle alternative instead.

MAGID Y50 Safety Glasses ANSI Z87.1+ Review (2026)

Reviewed under: Safety Glasses · MAGID Y50 Safety Glasses ANSI Z87.1+

The MAGID Y50 (model Y50BKAFC) sits in the value-tier of MAGID’s EyePro line—a construction-grade pair of polycarbonate safety glasses that covers the ANSI/ISEA Z87.1+ high-impact standard, ships with both anti-fog and scratch-resistant coatings on the same lens, and includes an integrated side shield frame so you don’t need a separate clip-on attachment to satisfy OSHA 29 CFR 1910.133 lateral-protection requirements. At roughly a pair depending on pack size, it’s priced to be a jobsite consumable rather than a long-term investment piece.

For shoppers at WC Safety’s eye protection collection, the Y50 occupies a specific niche: more coverage than a basic open-temple wrap frame, less bulk than an indirect-vent goggle. The bifocal reader variants (1.5x and 2.0x) extend its appeal to workers who need close-task magnification without switching to a second pair of glasses. Six lens tint options—clear, gray, amber, blue-blocking, and two reader powers—mean a single SKU family can cover most indoor/outdoor shift configurations.

This review covers the full specification set pulled from the live product page, a head-to-head comparison against direct competitors in the safety glasses collection, total cost-of-ownership math, and a 16-question FAQ targeting the evaluation and use-case questions that matter most for industrial buyers. No manufacturer input. No paid placement.

WC Safety Verdict: 4.1/5
The MAGID Y50 delivers verified ANSI Z87.1+ protection, dual AF+AS coatings, and a compliant integrated side-shield frame at a price point that makes bulk stocking practical—strong value for construction and manufacturing environments; step up if you need polarized lenses or a full-seal fit.

As an Amazon Associate, WC Safety earns from qualifying purchases. Prices and availability are subject to change. Full affiliate disclosure.

VIEW ON WC SAFETY → CHECK PRICE ON AMAZON →

Who the MAGID Y50 Safety Glasses ANSI Z87.1+ Is For

The Y50 is built for workers in environments where OSHA mandates side-impact protection and anti-fog performance is a daily requirement rather than a nice-to-have. It is not a polarized outdoor glass, a chemical-splash goggle, or a premium fit-adjusted frame. Browse the full Safety Glasses collection if you need something more specialized.

• Construction laborers and general contractors who need Z87.1+ high-impact compliance and side coverage for debris, hammer chips, and concrete dust on active jobsites.
• Utility and electrical workers exposed to arc flash debris, wire fragments, and overhead particulate where integrated shields reduce equipment count.
• Manufacturing technicians and assembly line workers on indoor lines where fog from temperature differentials between climate zones is a recurring problem.
• Maintenance and facilities teams doing varied tasks—grinding, drilling, HVAC work—where a single certified pair covers multiple hazard types across a shift.
• Workers who need close-task magnification: the bifocal reader variants let electricians, instrument technicians, and assembly workers read fine markings without a separate pair of readers.
• Safety managers building bulk stock programs: at/pair in the 12-pack, the Y50 is practical as a replacement-cycle consumable or visitor safety program frame.

What the MAGID Y50 Safety Glasses ANSI Z87.1+ Does Well

Verified ANSI/ISEA Z87.1+ High-Impact Rating

The Z87.1+ designation is the harder standard. Basic Z87.1 covers low-impact tasks; Z87.1+ (the “+” suffix) adds a high-velocity impact test involving a 1/4-inch steel ball fired at 150 fps. The Y50 carries the full high-impact mark, which satisfies OSHA 29 CFR 1910.133 in essentially all industrial settings that don’t specifically require goggles or face shields. If your program calls for safety glasses over goggles, the Y50’s certification covers the standard without ambiguity.

Dual AF + AS Coatings on a Single Lens

Many value-tier safety glasses make you choose: anti-fog OR scratch-resistant. The Y50 applies anti-fog to the inner (eye-side) surface and scratch-resistant to the outer surface, which is the technically correct configuration—fog forms on the inside, scratches accumulate on the outside. For the distinction between these two coatings and when each matters more, see our guide: Anti-Fog vs Anti-Scratch Safety Glasses. Having both on the same lens at this price point is a genuine differentiator versus bare-lens alternatives.

Integrated Side Shields for OSHA Lateral Coverage

OSHA 29 CFR 1910.133(a)(1) requires eye protection to provide side protection when there is a hazard from flying objects. The Y50 frame incorporates side shields as part of the certified assembly—not a slide-on accessory that could be omitted or lost. This matters during compliance audits: the Z87.1+ mark is on the frame+lens assembly as worn, not a modular combination you have to verify separately.

Six Lens Tint Options Including Bifocal Readers

Clear, gray, amber, and blue-blocking tints cover standard indoor/outdoor/transition use cases. For guidance on which tint fits your environment, see: Amber vs Clear Lens Safety Glasses, Clear vs Smoke Lens Safety Glasses, and Indoor/Outdoor vs Clear Lens Safety Glasses. The 1.5x and 2.0x bifocal reader variants are the most distinctive option—polycarbonate bifocal safety glasses that retain the Z87.1+ rating while allowing close-task reading without switching eyewear.

99.9% UV-A/UV-B Protection Across All Variants

Every lens in the Y50 line blocks 99.9% of UV radiation across both the UV-A (315–400 nm) and UV-B (280–315 nm) bands. This is standard for polycarbonate lenses but confirmed on the Y50 spec sheet. For outdoor workers with extended sun exposure, UV compliance doesn’t depend on lens color choice.

Where the MAGID Y50 Safety Glasses ANSI Z87.1+ Falls Short

No Polarized Option in the Y50 Line

If glare from reflective surfaces—wet pavement, standing water, vehicle glass, metal roofing—is a meaningful hazard or comfort issue on your site, the Y50 has no answer. For that use case, review Polarized vs Non-Polarized Safety Glasses and consider the DEWALT DPG109 or the Polarized Safety Glasses collection.

Not a Chemical-Splash or Fine-Dust Goggle

The Y50 is a spectacle-style frame, not an indirect-vent goggle. There is no perimeter seal between the lens and your face. Chemical splash, fine respirable dust, and heavy liquid mist can enter around the frame. For those environments, the safety glasses vs goggles decision needs to be made first. Similarly, if a face shield is required, the Y50 serves as the under-shield eye protection component—not a substitute for the shield itself.

Bulk Pricing Restricted to Clear Lens Only

The 12-pack is clear lens only. If you’re stocking gray or amber for outdoor crews, you’re limited to single pairs or 2-packs, raising per-unit cost. For large crews with varied tint needs, this is an inventory planning constraint worth noting before committing to the Y50 as a program-wide standard.

Fixed Temple Design Limits Fit Adjustment

The Y50 uses a fixed-length, fixed-angle temple. There’s no ratchet, no adjustable tip, and no rubber-tip swap. Workers with larger heads or atypical temple geometry may find the fit unstable under a hard hat brim or with over-ear hearing protection. Verify fit before bulk-ordering for a crew with diverse head sizes.

How the MAGID Y50 Safety Glasses ANSI Z87.1+ Compares to Key Competitors

The table below compares the Y50 against four direct competitors available in the Safety Glasses collection. All products listed carry ANSI Z87.1+ certification.

Check prices on Amazon → MAGID Y50 on Amazon Pyramex ZTEK on Amazon Uvex Genesis on Amazon 3M Solus 2000 on Amazon

MAGID Y50 vs Other MAGID Safety Eyewear: Which Model Fits Your Job?

MAGID produces several safety glass families. The table below positions the Y50 against two other MAGID models commonly stocked in the safety glasses collection.

• Buy the MAGID Y50 if you need side-shield compliance, anti-fog, and either standard tints or bifocal readers in one package.
• Buy the MAGID Y10 if anti-fog is not a requirement and you want a simpler, lighter frame for dry indoor tasks.
• Buy the MAGID EC10 if fog is your primary failure mode and side-shield compliance is also required, but you don’t need bifocal power.

Shop the MAGID line on Amazon → MAGID Y50 MAGID Y10 MAGID EC10

Compatible Products and Accessories for the MAGID Y50

The Y50 is a spectacle-style frame. Common accessories that work with it or complement its use cases:

• Face shields for secondary protection: In grinding, cutting, and chemical-handling tasks, the Y50 can serve as the primary under-shield eye protection. See our safety glasses vs face shields guide for when you need both.
• Anti-fog wipes and lens cleaning kits: Dual AF+AS coatings extend lens life, but purpose-made lens wipes maintain coating performance and clear smudge/debris between uses. Available in the eye protection accessories section.
• Hard hat slot-mount glasses retainers: For workers wearing the Y50 under a brim, temple-grip retainer cords reduce drop loss and keep the glasses accessible when not on the face.
• Over-the-glass (OTG) alternatives: If prescription wearers need to fit the Y50 over corrective lenses, measure temple clearance first. OTG-specific models in the safety glasses collection are sized and shaped specifically for over-glass wear.
• Hearing protection for multi-hazard tasks: Workers using the Y50 on noisy jobsites should ensure earmuff headbands don’t displace the temple. Banded earplugs or in-ear options are typically more compatible with spectacle-style frames than over-ear muffs.

Find accessories on Amazon → Anti-Fog Lens Wipes Glasses Retainer Cords Protective Cases

Common questions

Does the MAGID Y50 meet ANSI Z87.1+ and qualify as OSHA-compliant eye protection?

Yes. The MAGID Y50 (model Y50BKAFC) carries the ANSI/ISEA Z87.1+ high-impact certification, which is the standard OSHA 29 CFR 1910.133 references for industrial eye protection in environments with flying debris, chips, or particles. The + suffix confirms it passed the high-velocity impact test (0.25-inch steel ball at 150 fps), not just the basic drop test. Check your specific industry standard—some specialized applications (welding, laser work, chemical labs) require additional ratings beyond Z87.1+.

MAGID Y50 vs Pyramex ZTEK — which safety glass should I buy?

If anti-fog coating is a daily requirement, buy the Y50—it includes AF as standard while the Pyramex ZTEK offers AF only on select variants at higher cost. If you want the lowest possible price per pair and fog is not a concern, the ZTEK can undercut the Y50 on unit price. Both carry Z87.1+ and include integrated side shields. The Y50 adds the bifocal reader option that the ZTEK does not offer.

MAGID Y50 vs Uvex Genesis — which is the better industrial safety glass?

The Uvex Genesis has a more ergonomic, adjustable fit and a broader lens wrap for peripheral coverage, making it a better fit for workers who wear glasses all day. The Y50 has a lower price point and the bifocal reader option the Genesis lacks. For comfort-sensitive daily users, the Genesis often wins on fit. For cost-sensitive bulk programs, the Y50’s 12-pack pricing is more competitive.

Is the MAGID Y50 available over prescription glasses (OTG)?

The Y50 is not specifically listed as an OTG frame. Workers who wear prescription eyewear should verify that their RX frame fits within the Y50 temple clearance before ordering. For dedicated OTG fits, browse the safety glasses collection for frames explicitly designed for OTG use, which have wider temples and deeper lens openings sized to accommodate corrective lenses underneath.

What anti-fog coating does the MAGID Y50 use, and how long does it last?

The Y50 uses a chemical anti-fog coating applied to the inner (eye-side) lens surface. The coating works by allowing moisture to spread as a thin, uniform film rather than forming vision-blocking droplets. Under normal industrial use with proper care (lens wipes and microfiber cloths, no solvents), AF coatings on polycarbonate lenses typically remain effective for 12–24 months. See Anti-Fog vs Anti-Scratch Safety Glasses for maintenance guidance.

Does the MAGID Y50 gray lens work for outdoor construction work?

Yes, the gray lens is an appropriate tint for outdoor work in bright conditions. Gray lenses reduce overall light transmission without significantly shifting color perception. They are not polarized, so glare from horizontal reflective surfaces is not eliminated. For polarized outdoor protection, see the Polarized Safety Glasses collection or read Polarized vs Non-Polarized Safety Glasses.

Can the MAGID Y50 bifocal reader be used for precision assembly and instrument work?

Yes—the bifocal reader variants (1.5x and 2.0x magnification) retain the full ANSI Z87.1+ rating and are appropriate for close-task industrial work such as reading terminal markings, wiring labels, calibration scales, and fine assembly components. The bifocal insert is in the lower-center lens zone, so the upper field remains clear for normal-distance vision. Choose 1.5x for mild magnification needs, 2.0x for more significant close-up requirements.

How do the MAGID Y50 amber lenses compare to clear for low-light or overcast conditions?

Amber lenses enhance contrast by filtering short-wavelength blue light, which scatters more in haze, overcast skies, and artificial lighting. This makes amber a better choice than clear for workers in low-contrast environments: overcast outdoor sites, warehouse interiors with fluorescent lighting, or dawn/dusk shifts. For the full comparison, see Amber vs Clear Lens Safety Glasses.

Is the MAGID Y50 compliant with OSHA 29 CFR 1910.133 side-protection requirements?

Yes. OSHA 29 CFR 1910.133(a)(1) specifies that eye protection must provide side protection when flying object hazards exist. The Y50 frame incorporates integrated side shields as part of the certified Z87.1+ assembly—meaning the side protection is built into the certified product, not an add-on that could be omitted.

How long do MAGID Y50 lenses typically last before replacement is needed?

Under typical industrial use with proper cleaning, 12–24 months is the practical service range. Replace sooner if visible scratches cross the central optical zone, anti-fog performance degrades after proper cleaning, or the frame is cracked or hinge-damaged. Many EHS programs set a 12–18 month mandatory replacement cycle for daily-use safety glasses in abrasive environments.

Does the MAGID Y50 protect against UV radiation?

Yes. All Y50 lens variants block 99.9% of UV-A (315–400 nm) and UV-B (280–315 nm) radiation. This is a property of polycarbonate material, present regardless of which tint you select, so outdoor workers get UV coverage even on the clear-lens version.

MAGID Y50 vs 3M Solus 2000 — which is better for manufacturing floor use?

Both carry Z87.1+ and anti-fog coatings. The 3M Solus 2000 has adjustable ratchet temples and a slightly more ergonomic fit profile that many workers prefer for all-day wear. The Y50 has bifocal reader options the Solus 2000 line does not offer and typically comes in at a lower per-pair price in multi-pack configurations. For workers who need readers or programs prioritizing bulk-pack value, the Y50 is the better call. For workers who prioritize all-day comfort with a fit-adjustable frame, the Solus 2000 is worth the modest price premium.

Does wearing the MAGID Y50 with a hard hat brim cause fit issues?

This is a common concern with fixed-temple spectacle frames under hard hat brims. The Y50’s fixed temple design does not allow length or angle adjustment, which can cause the brim to push the frame downward on some head shapes, particularly with full-brim hard hats. Verify fit on your specific hard hat model before bulk ordering. Slot-mount retainer cords can help keep the glasses in position when the hard hat is worn.

Can the MAGID Y50 be used for welding or torch cutting operations?

No. The Y50 is not a welding lens and does not meet ANSI Z87.1 filter shade requirements for arc welding, gas welding, torch cutting, or brazing. These operations require appropriate shade lenses (IR-filtered, shade 3–14 depending on process). Using the Y50 as a substitute for welding eye protection is a compliance violation and a safety hazard. See WC Safety’s eye protection collection for welding-rated lens options.

Where does the MAGID Y50 fit in a full PPE program that includes respiratory protection?

In a full PPE ensemble for construction, demolition, or abatement work, the Y50 serves the eye/face impact protection layer. It is not a substitute for respiratory protection in environments with airborne hazards. For respiratory protection selection alongside eye protection, see Respiratory Protection: Complete Buyer’s Guide. Note that full-face respirator lens assemblies provide their own eye protection and may replace the need for separate safety glasses—confirm with your respirator cartridge selection guide and your site CIH or safety officer.

Sources. Requirements referenced here come from OSHA 29 CFR 1910 and the NIOSH recommendations. Where a consensus standard governs, the ANSI document is named in the text.

Related reference

Closely related on this site: 3m solus 1000 series safety glasses, 3m solus 2000 series safety glasses, 3m virua ap safety glasses, 3m virua ccs safety glasses, anti-fog safety glasses guide, and indoor/outdoor vs clear lens safety glasses: which is right?.

Why trust WC Safety

WC Safety is an independent, affiliate-supported review site. It is not a retailer: it holds no inventory, takes no orders, and earns only from qualifying purchases through clearly marked links — which never changes what a product is rated to do. Standards language is taken from the regulation text directly, and ratings are reported as the manufacturer publishes them. We run no laboratory and perform no testing of our own. Where published sources disagree, we say so and plan on the conservative figure rather than the flattering one.

Our methodology

Figures come from the regulation and the published specification, in that order. Derated numbers are calculated, not estimated. Nothing here is presented as a measured result, because we measure nothing.

Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers and regulators publish, with the gaps in that record marked. Last reviewed August 2026.