Jksafety hi vis class 3 short review: Jksafety Hi Vis Class 3 Short Sleeve Safety Shirt Review
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. Commissions do not influence our review.
★★★★☆ 4.3/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | JKSafety |
|---|---|
| Category | Safety Shirt |
| ANSI/ISEA 107 rating | Class 3 |
| Key features | ANSI Class 3; short sleeve; reflective strips |
| Typical price | $11.99 |
The JKSafety Class 3 Safety Shirt is a rated Class 3 high-visibility safety shirt from JKSafety, listed at the listed price. It's built for summer roadway and utility crews whose sites specify Class 3 while the heat index specifies short sleeves — and this review covers what the listing actually documents, where it beats its closest rival, and who should buy something else.
Why the JKSafety Class 3 Safety Shirt Stands Out
Published · Last updated
Class 3 in a short-sleeve shirt is a genuinely useful oddity — the rating usually demands long sleeves for background area, so a short-sleeve garment that carries it gives hot-weather crews the top visibility class without the heat penalty. That's the JKSafety's whole argument, and at twelve dollars it's a strong one.
Specification and Configuration
What the listing commits to: ansi class 3; short sleeve; reflective strips. The Class 3 rating is the load-bearing spec — it's what an inspector reads off the garment label, and it determines which job requirements this garment can satisfy on its own. Size and color options run on the linked Amazon listing rather than as separate stocked variants.
Fit guidance for hi-vis safety shirts follows the outer-layer rule: only visible material counts toward compliance, so this garment earns its keep worn as the outermost layer. Order roomy enough that reflective bands sit where the certification assumes and nothing binds when you reach overhead. Browse the full lineup in the Hi-Vis Shirts collection to compare against everything we cover.
Where It Falls Short
Its limits, honestly: Sun-exposure-heavy work — short sleeves trade UV protection for cooling; the GloWear 8368 long sleeve covers forearms for about the same money.
Pros and Cons
Pros
- ANSI Class 3
- Class 3 rating stated on the listing
- the listed price — crew-outfitting territory
- From a brand we cover across the high-visibility catalog
Cons
- Single-listing size/color selection happens on Amazon, not as stocked variants
- Sun-exposure-heavy work
Who Should Buy It
Consider the JKSafety Class 3 Safety Shirt if you are summer roadway and utility crews whose sites specify Class 3 while the heat index specifies short sleeves.
Who Should Skip It
Skip it for sun-exposure-heavy work — short sleeves trade UV protection for cooling; the GloWear 8368 long sleeve covers forearms for about the same money.
How It Compares
The GloWear 8367 is the premium take on the same Class 3 short-sleeve formula; the JKSafety delivers the same stated rating at a fraction of the price. Uniform programs standardize on Ergodyne; budget crews get identical paperwork compliance from the JKSafety. Both sit inside the wider field ranked in our buyer's guides, and the Hi-Vis Shirts collection carries the complete ladder. Head-to-head rival: Ergodyne GloWear 8367.
Other High-Visibility Options
- TICONN Class 2 Safety T-Shirt
- OccuNomix LUX-SSETP2B Birdseye T-Shirt
- TICONN Hi-Vis Rain Jacket
- TICONN Hi-Vis Rain Trench Coat
- TICONN Hi-Vis Rain Suit
- JKSafety Hi-Vis Rain Jacket
- JKSafety Hi-Vis Rain Pants
- JORESTECH Hi-Vis Overall Pants
- Portwest Hi-Vis Rain Trousers
Hi-Vis Guides
- Best Hi-Vis Safety Vests Buyer's Guide
- Best Hi-Vis Jackets Buyer's Guide
- Best Hi-Vis Shirts Buyer's Guide
- What Is ANSI/ISEA 107-2020?
- ANSI Class 2 vs Class 3 Hi-Vis
- When Does OSHA Require High Visibility?
- Hi-Vis Color Meaning Guide
Browse by Category
- High Visibility Collection
- ANSI Class 2 Vests
- ANSI Class 3 Vests
- Hi-Vis Jackets
- Hi-Vis Shirts
- Hi-Vis Rainwear
Frequently Asked Questions
What ANSI rating does the JKSafety Class 3 Safety Shirt have?
The Amazon listing states Class 3. That's the rating an inspector reads off the garment label, and it's what determines which job requirements the garment satisfies alone.
The Bottom Line
The JKSafety Class 3 Safety Shirt does its job at its price: ansi class 3 with Class 3 at the listed price. Rated 4.3/5 on documented spec, configuration, and value for the intended buyer.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates high-visibility apparel for industrial, roadway, and utility buyers.
How We Review
Reviews draw on the manufacturer's published listing data, ANSI/ISEA 107-2020 garment classification, and OSHA/FHWA visibility requirements. We do not run lab tests or invent specifications; where a listing states no ANSI class, the review says so. Ratings reflect documented spec, configuration, and value.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Common questions
How much does the JKSafety Class 3 Safety Shirt cost?
the listed price at the linked Amazon listing. Prices track the live listing, and size or color selections there can shift the number.
JKSafety Class 3 Safety Shirt vs Ergodyne GloWear 8367 — which should I buy?
The GloWear 8367 is the premium take on the same Class 3 short-sleeve formula; the JKSafety delivers the same stated rating at a fraction of the price. Uniform programs standardize on Ergodyne; budget crews get identical paperwork compliance from the JKSafety.
Who is the JKSafety Class 3 Safety Shirt best for?
Summer roadway and utility crews whose sites specify Class 3 while the heat index specifies short sleeves.
When should I skip the JKSafety Class 3 Safety Shirt?
Sun-exposure-heavy work — short sleeves trade UV protection for cooling; the GloWear 8368 long sleeve covers forearms for about the same money.
What sizes does the JKSafety Class 3 Safety Shirt come in?
The size run (and color options where offered) lives on the linked Amazon listing — we deliberately don't restate it, because listings update. Order hi-vis outerwear roomy: it goes over work clothes, and compliance depends on the garment sitting right.
Can I wear the JKSafety Class 3 Safety Shirt as my only high-visibility garment?
Yes, worn as the outermost layer — a Class 3 garment satisfies any requirement written at or below that class. Cover it with an unrated layer and the rating stops counting.
Is JKSafety a good brand for hi-vis gear?
JKSafety built its name on the 9-pocket safety vest — one of the best-selling hi-vis items on Amazon — and has expanded into shirts and rainwear. A value brand whose staple products have long track records; we cover several across the catalog.
What's the difference between the fluorescent fabric and the reflective tape?
They work in different light. Fluorescent background material converts UV into visible brightness — that's your daytime and dusk conspicuity. Retroreflective tape bounces headlight beams straight back at the driver — that's your night visibility. ANSI/ISEA 107 requires minimum areas of both, which is why a faded shell or cracked tape each independently retire a garment.
Does OSHA require a hi-vis safety shirt specifically?
OSHA requires high-visibility apparel for exposures like flagging (29 CFR 1926.201), and FHWA rules require ANSI 107 Class 2 or higher on federal-aid highway rights-of-way — but neither names a garment format. A safety shirt satisfies the requirement when it carries the specified class and is worn as the outermost layer.
How do I verify ANSI compliance when the garment arrives?
Read the sewn-in label. A compliant garment states the standard (ANSI/ISEA 107), its class (1, 2, 3, or E), and its type (R, O, or P). If the label is missing or states less than the listing claimed, that's your answer — the label, not the product page, is what an inspector reads.
Can the JKSafety Class 3 Safety Shirt replace a safety vest?
Yes — ANSI/ISEA 107 certifies garments, not formats. A rated shirt worn as the outermost layer satisfies the same requirement a vest of that class does, with nothing to forget in the truck or flap near machinery.
Is the JKSafety Class 3 Safety Shirt flame resistant?
No FR rating is stated on the listing — treat it as a standard hi-vis work shirt. Arc-flash, hot work, and flash-fire exposures need FR-rated hi-vis apparel, which is a separate product class.
How many shirts like the JKSafety Class 3 Safety Shirt does a daily-wear worker need?
Two or three in rotation per season. Rotation halves the wash count per shirt — and wash count, not calendar time, is what fades fluorescent dye below usefulness.
Lime or orange hi-vis shirt — which color?
Both meet ANSI/ISEA 107. Lime tends to win against urban and equipment backgrounds; orange is the convention in many DOT districts and reads well against winter terrain. Site convention usually decides.
Does the rating on the box equal the protection I get?
No. Published ratings come from laboratory conditions. Regulators apply derating precisely because real fit is worse, and the derated figure is the one to plan from.
Sources. Requirements referenced here come from OSHA 29 CFR 1910 and the NIOSH recommendations. Where a consensus standard governs, the ANSI document is named in the text.
Related reference
If this page is part of a wider question, the neighbouring references are 3m 310 1001 e a r classic ear plugs cordless nrr 29 db review, 3m 310 1001 e a r classic earplug review, 3m 311 1110 classic pr corded earplugs review, 3m ear classic 310 1001 uncorded earplugs nrr 29 200 pairs review, 3m ear classic plus 310 1101 nrr 33 uncorded 200 pair review, 3m ear classic plus 311 1122 uncorded earplugs nrr 33 200 pairs review, 3m 11329 virtua ccs ap protective safety goggles review and 3m 2800 otg eyeglass protectors safety goggles review. Each covers one standard or one figure, so they can be read in any order.
Further reading in the same area: 3m 91252 chemical splash impact safety goggle anti fog review, 3m bx reader safety glasses review, 3m centurion 452af impact safety goggle clear anti fog review, 3m centurion 454af safety splash goggle clear anti fog review, 3m dbi sala suspension trauma safety strap review, 3m gg3001ssgaf gogglegear 3000 series safety review, 3m gogglegear 500 gg501sgaf clear scotchgard safety goggles review.
Neighbouring topics that come up in the same decision: 3m infrared welding flip up shade 3 safety glasses review, 3m nuvo reader safety glasses review, 3m securefit safety glasses review, 3m securefit x5000 safety helmet review, 3m securefit x5007 safety helmet review, 3m sf3701sgaf securefit anti fog safety goggles review, 3m solus 1000 series safety glasses review, 3m solus 2000 series safety glasses review.
Why trust WC Safety
WC Safety is an independent, affiliate-supported review site. It is not a retailer: it holds no inventory, takes no orders, and earns only from qualifying purchases through clearly marked links — which never changes what a product is rated to do. Standards language is taken from the regulation text directly, and ratings are reported as the manufacturer publishes them. We run no laboratory and perform no testing of our own. Where published sources disagree, we say so and plan on the conservative figure rather than the flattering one.
Our methodology
Figures come from the regulation and the published specification, in that order. Derated numbers are calculated, not estimated. Nothing here is presented as a measured result, because we measure nothing.
Researched and written by Steven Eaton, editor of WC Safety. Steven holds no safety certification and does not test products; this page compares what manufacturers and regulators publish, with the gaps in that record marked. Last reviewed August 2026.
Leave a comment