Honeywell North 760008AS Full Face Respirator Review: 7600 Series Silicone Full-Facepiece (Small)

North 760008AS Silicone Full-Facepiece Respirator Review Is It Right for Smaller-Faced Workers Requiring APF 50 Full-Face Chemical Protection?

North 760008AS quick answer: The highest-rated Honeywell North 7600 series full-face respirator (4.71/5, 882 reviews). NIOSH-approved silicone full-facepiece for smaller faces, APF 50, full North 75-series cartridge compatible. For smaller-faced workers in chemical, refinery, and high-hazard environments requiring APF 50 and eye protection.

North 760008AS Silicone Full-Facepiece Respirator Review (2026)

4.71 / 5 Highest-rated 7600 series full-face exceptional fit for smaller faces at 4.71/5 from 882 reviews

The 760008AS is the small-size Honeywell North 7600 series silicone full-facepiece respirator and the highest-rated North 7600 series product with a 4.71/5 rating from 882 reviews. Unlike the half-mask line where the small size carries the lowest rating due to fit challenges, the 760008AS small full-face outperforms the medium/large (760008A, 4.4/5) reflecting that workers who genuinely need a smaller full-face respirator, when properly fitted, report exceptional seal quality and comfort. For a medium/large-size 7600, see the North 760008A. For the economical 5400 thermoplastic small, see the North 54001S (4.67/5).

Check Price on Amazon → BUY North 760008AS AT WC SAFETY

Who the North 760008AS Is For

The North 760008AS is for workers with smaller facial profiles who require full-face APF 50 respiratory protection with integrated eye and face coverage.

• Smaller-faced workers in high-hazard chemical environments the 760008AS's exceptional 4.71/5 rating from 882 reviews reflects consistent field performance for workers who need a small full-face unit; it is significantly more validated than the M/L variant
• Women workers in chemical plant, refinery, and industrial roles smaller facial profiles common among women workers often do not achieve adequate seal in M/L full-face units; the 760008AS small addresses this critical gap in full-face respirator programs
• Chemical splash environments requiring APF 50 acid, alkali, solvent operations where eyes must also be protected; full-face eliminates the half-mask + goggle combination
• HAZMAT and emergency response smaller-faced first responders requiring APF 50 air-purifying protection on the North platform

If your facial profile is average to large, the North 760008A (M/L) or North 54001 (5400 M/L, 5.0/5) is the correct size selection.

North 760008AS Performance: What It Does Well

Exceptional Field Validation 882 Reviews at 4.71/5

The 760008AS has a unique distinction in the North full-face respirator catalog: its 4.71/5 rating from 882 reviews is the most heavily validated North full-face rating. The volume of reviews across diverse industries gives strong confidence that the small-size 7600 silicone delivers consistent seal quality and comfort for workers with smaller facial profiles. This is not a niche product it is widely used and consistently praised.

APF 50 for Smaller-Faced Workers A Critical Program Gap Addressed

Many full-face respirator programs historically under-serve workers with smaller faces because M/L sizes dominate stock. The 760008AS directly addresses this gap: smaller-faced workers particularly women in chemical, pharmaceutical, and laboratory environments now have access to the full APF 50 protection on the North platform in a size that actually fits. The higher rating vs. the M/L version confirms that properly sized small full-face respirators perform better than oversized M/L units worn on smaller faces.

Limitations: Where the North 760008AS Falls Short

Premium Price vs. 5400S Thermoplastic

The 760008AS is premium-priced relative to the thermoplastic North 54001S (5400S). For programs where the small full-face is needed but budget is constrained, the 54001S delivers identical APF 50 and North cartridge access at lower facepiece cost. The 7600 silicone premium is justified when extended-wear comfort, chemical resistance of the facepiece material, or the superior silicone seal are specifically required.

QNFT and Training Requirements

Full-facepiece use at APF 50 demands more rigorous fit testing, more comprehensive worker training, and more attentive pre-use inspection than half-masks. Programs that issue full-face respirators without proper QNFT and training infrastructure will not achieve the APF 50 that the 760008AS is rated for.

North 760008AS vs. Alternatives Full Comparison

APF 50 applies to all properly fit-tested NIOSH-approved full-facepiece respirators under OSHA 29 CFR 1910.134 Appendix A 5 the APF of a half-mask (APF 10). Full-facepiece respirators protect the eyes, nose, and mouth from chemical splash, vapors, and particulates. Quantitative fit testing (QNFT) is recommended for high-hazard applications at APF 50. Cartridge platforms are brand-specific: North cartridges are NOT compatible with 3M, MSA, or other brands.

Compatible Cartridges & Filters for the North 760008AS

The Honeywell North 7600 and 5400 series full-facepiece respirators use the same standard North bayonet twist-lock cartridge connector as the North half-mask series compatible with the full North 75-series cartridge and filter line:

• N95 Particle Filters: North 7506N95 NIOSH N95 (95% non-oil-resistant) for general industrial dust
• P100 Particle Filters: North P100 filters NIOSH P100 (99.97%) for silica, lead, asbestos, welding fume, and toxic dust
• OV Cartridges: North organic vapor cartridges for solvent, painting, and chemical operations
• Acid Gas Cartridges: North acid gas cartridges for HCl, SO, Cl, and similar inorganic acid gas environments
• Combination Cartridges: OV+P100, AG+P100, and multi-gas+P100 from the North 75-series see the full lineup at Honeywell North respirator cartridges

Critical: North bayonet cartridges are NOT compatible with 3M, MSA, Moldex, or any other brand's bayonet system. Do not attempt cross-brand cartridge use. Full-facepiece respirators at APF 50 require appropriate cartridges selected for the specific regulated hazard confirm cartridge selection through a formal hazard assessment and industrial hygiene review.

Lens, Facepiece & Service Life

Full-facepiece respirators require more comprehensive maintenance than half-masks due to the lens and additional sealing surface. Per OSHA 29 CFR 1910.134(h)(1), inspect before each use and after each cleaning.

• Lens inspection: Check for scratches, crazing, cracks, or chemical fogging that impairs visibility. A scratched or fogged lens impairs situational awareness and must be replaced. Do not use abrasive cleaners on polycarbonate lenses.
• Lens cleaning: Clean the inside of the lens with lens-safe anti-fog cloths or mild soap and water. Dry gently with a lint-free cloth. Severe scratching or chemical pitting requires lens replacement.
• Face seal inspection: Check silicone or thermoplastic face seal for cracks, tears, permanent distortion, or hardening. A deformed face seal cannot achieve an adequate fit and must be replaced.
• Exhalation valve: Inspect for cracks, debris, or stiffness. A damaged exhalation valve allows unfiltered air in during inhalation.
• Headband harness: Replace if elastic straps are cracked, broken, or no longer maintain adequate tension.
• Cleaning: Remove cartridges, valve cover, and lens (if removable). Wash with mild soap and warm water. Rinse thoroughly. Air dry. Do not submerge with cartridges attached. Do not use petroleum solvents on silicone or polycarbonate.
• Storage: Store in a sealed bag away from UV light, ozone, chemical vapors, and heat. Do not compress the facepiece or store under weight.
• Fit testing: Annual QNFT recommended for full-facepiece respirators used at APF 50. Any change in facial structure, dental work, or weight change may require re-testing.

Final Verdict: North 760008AS Silicone Full-Facepiece Respirator

The North 760008AS earns 4.71/5 the highest-rated full-face respirator in the Honeywell North collection. For smaller-faced workers requiring APF 50 and chemical eye/face protection on the North platform, it is the definitive choice: extensively validated, premium silicone seal, and consistently excellent fit results for the full-face small size.

For medium/large-faced workers on the same platform, see North 760008A. For the economical thermoplastic small alternative, North 54001S (4.67/5) provides equivalent APF 50 compliance at lower cost.

Frequently Asked Questions North 760008AS

What does the 760008AS protect against?

The 760008AS is the platform; protection depends on the installed cartridge. At APF 50 with appropriate North cartridges: OV, AG, P100, or multi-gas hazards. The full-facepiece lens also protects the eyes from chemical splash, vapor, and aerosol exposure. APF 50 = protection up to 50 OEL per OSHA 1910.134 Appendix A.

Why does the 760008AS (small) have a higher rating than the 760008A (M/L)?

The 760008AS has a 4.71/5 rating from 882 reviews vs. 4.4/5 for the 760008A. This counterintuitive result reflects that when smaller-faced workers who genuinely need a small full-face are properly fitted, they report better outcomes than workers who receive an M/L unit that may not ideally match their facial profile. It also reflects the larger review base (882 vs. 15 reviews) providing a more statistically reliable rating.

What cartridges fit the 760008AS?

Full Honeywell North 75-series line via North bayonet: North 7506N95, North P100 filters, North OV/AG/combination cartridges. Same cartridges as the North half-masks and 760008A. North cartridges are NOT compatible with 3M, MSA, or any other brand.

Is the 760008AS NIOSH approved?

Yes NIOSH 42 CFR 84 TC-14C. Annual fit testing required; QNFT recommended for APF 50 applications.

Does the 760008AS require fit testing?

Yes OSHA 1910.134(f)(2) mandates annual fit testing. QNFT with fit factor 500 is recommended for full-facepiece respirators used in high-hazard APF 50 environments.

How do I know if I need the small size?

Small is appropriate for workers with smaller facial dimensions common among women workers and workers with shorter or narrower facial profiles. OSHA-required QNFT will confirm which size achieves adequate fit factor. The 760008AS's exceptional rating across 882 reviews validates that the small size consistently delivers excellent fit when selected correctly.

What is the difference between the 760008AS and 54001S?

Both are small North full-face respirators with identical APF 50 and North 75-series cartridge compatibility. 760008AS: silicone facepiece premium comfort, superior seal conformability, longer durability, higher price. 54001S: thermoplastic economical, adequate seal for most workers, 4.67/5. Choose 760008AS for extended-wear chemical environments; choose 54001S for budget programs.

Does the 760008AS protect against chemical splash to the eyes?

Yes. The full-facepiece polycarbonate lens provides ANSI Z87.1-rated eye and face protection against chemical splash, aerosols, and vapor. It covers the eyes and face completely eliminating the need for separate splash goggles in most chemical environments. Note: the 760008AS is not rated as a welding shade for welding arc flash, use the 760008ASW welding variant.

How do I clean the 760008AS?

Remove cartridges and valve cover. Clean facepiece and lens interior with mild soap and water. Rinse thoroughly. Air dry. Use lens-safe anti-fog cleaner on the inside of the lens to prevent fogging. Do not use abrasive cleaners on polycarbonate. Do not use petroleum solvents on silicone.

Can I use 3M cartridges on the 760008AS?

No North and 3M bayonet connectors are incompatible. North 75-series cartridges only.

What OSHA regulations require a full-face respirator vs. half-mask?

Full-facepiece (APF 50) is required or recommended when: contaminant concentration exceeds 10 OEL (exceeds half-mask APF 10); eye protection from chemical splash or vapor is required (half-masks do not protect eyes); OSHA substance standards specify APF 50 (asbestos Class I, high-lead concentrations, concentrated Cr VI, etc.); or the hazard assessment calls for integrated eye-face-respiratory protection.

Where can I buy the 760008AS?

Available at WC Safety (wcsafety.com) as an authorized Honeywell North distributor. Also on Amazon via the link above (partner tag: wcsafety04-20).