Guardian 00510 Double D-Ring Ridg-It Roof Anchor Review (2026)
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. We stock this product; commissions do not influence our review.
★★★★½ 4.6/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | Guardian Fall Protection |
|---|---|
| Type | Anchorage connector |
| Configuration noted on listing | stainless steel; D-ring connection point |
| Standards | Listing references ANSI/OSHA anchorage requirements |
| Typical price | $27.98 |
| Model / SKU | 00510 |
The Guardian 00510 Double D-Ring Ridg-It Roof Anchor is an anchorage connector from Guardian Fall Protection, stocked at $27.98. It's built for crews that work both planes of a pitched roof and want one ridge anchor serving both sides — this review covers what the listing documents, where it beats its closest rival, and who should buy something else.
Why the Guardian 00510 Double D-Ring Ridg-It Roof Anchor Stands Out
The 00510 puts a D-ring on each side of the ridge, which sounds like a small thing until you work both faces of a roof in one day — re-anchoring is where time goes and where corners get cut. Same nail-on Ridg-It installation as its single-ring sibling.
Specification and Configuration
What the listing commits to: stainless steel; D-ring connection point. The listing references the applicable anchorage standards; the governing rule is OSHA's: anchorage for personal fall arrest must hold 5,000 lb per attached worker or be designed with a 2:1 safety factor under a qualified person. The anchor hardware is only half of that equation — the structure it attaches to is the other half, and no anchor rating fixes a weak substrate.
An anchor is the A in the ABC of fall protection — it pairs with a full-body harness and a connector (SRL or shock-absorbing lanyard) to form a complete system. Position anchors to minimize swing fall, calculate clearance before first use, and inspect before each use like every other system component. Any anchor that has taken a fall arrest load comes out of service per the manufacturer's instructions.
Where It Falls Short
Its limits, honestly: Single-face repairs where the base 00500 does the same job, and any non-wood surface.
Pros and Cons
Pros
- Stainless steel
- Anchorage standards referenced on the listing
- $27.98 — consumable-tier pricing
- Guardian Fall Protection — Guardian is a Pure Safety Group brand focused entirely on fall protection
Cons
- Anchor strength depends on the structure it attaches to — hardware rating alone doesn't make a compliant anchor point
- Single-face repairs where the base 00500 does the same job, and any non-wood surface
Who Should Buy It
Order the Guardian 00510 Double D-Ring Ridg-It Roof Anchor if you are crews that work both planes of a pitched roof and want one ridge anchor serving both sides.
Who Should Skip It
Skip it for single-face repairs where the base 00500 does the same job, and any non-wood surface.
How It Compares
Functionally the same anchor with one ring or two. Price difference is negligible — buy the double unless your supplier only has singles on the shelf. The full field is ranked in our best roof anchors guide, and the anchor-requirements reference covers the 5,000 lb rule in depth. Head-to-head rival: Guardian 00500 Ridg-It Single.
Other Anchors We Stock
- Guardian 00500 Ridg-It Single D-Ring Roof Anchor
- Guardian 10540 Pitch Pro Slotted Roof Anchor
- Peakworks Temporary Roof Anchor Bracket
- FallTech 7414 Bolt-On D-Ring Anchorage
- Super Anchor RS-20 Anchor Kit
- Guardian 10787 Premium 6 ft Cross-Arm Strap
- Werner Cross-Arm Strap
- Guardian 01630 X-Arm 48" Cross-Arm Strap
- Guardian 10715 Concrete Anchor Strap
Fall Protection Guides
- Best Roof Anchors & Roofing Safety Kits of 2026
- Fall Protection Anchor Points: The 5,000 lb Rule
- Fall Protection Equipment: The Complete 2026 Guide
- Best Fall Protection Kits of 2026
- Best Vertical Lifelines & Rope Grabs
- Best Self-Retracting Lifelines of 2026
- How to Calculate Fall Clearance
- The ABCDs of Fall Protection
- When Is Fall Protection Required? OSHA Height Triggers
Browse the Fall Protection Silo
- Fall Protection Anchor Points
- Fall Protection
- Fall Protection Kits
- Full Body Harnesses
- Self-Retracting Lifelines
- Vertical Lifelines & Rope Grabs
- Carabiners & Connectors
Frequently Asked Questions
What is the Guardian 00510 Double D-Ring Ridg-It Roof Anchor rated for?
The listing references the applicable anchorage standards. OSHA 29 CFR 1926.502(d)(15) requires personal fall arrest anchorage capable of 5,000 lb per attached worker, or a 2:1 engineered safety factor — verify the product markings and instructions on arrival.
What surface does the Guardian 00510 Double D-Ring Ridg-It Roof Anchor install on?
The 00510 puts a D-ring on each side of the ridge, which sounds like a small thing until you work both faces of a roof in one day — re-anchoring is where time goes and where corners get cut. Match the anchor pattern to the substrate — wood ridge anchors, concrete anchors, beam straps, and seam clamps are not interchangeable, and using one on the wrong surface is the category's classic fatal error.
Guardian 00510 Double D-Ring Ridg-It Roof Anchor vs Guardian 00500 Ridg-It Single — which should I buy?
Functionally the same anchor with one ring or two. Price difference is negligible — buy the double unless your supplier only has singles on the shelf.
Who is the Guardian 00510 Double D-Ring Ridg-It Roof Anchor best for?
Crews that work both planes of a pitched roof and want one ridge anchor serving both sides.
When should I skip the Guardian 00510 Double D-Ring Ridg-It Roof Anchor?
Single-face repairs where the base 00500 does the same job, and any non-wood surface.
How much does the Guardian 00510 Double D-Ring Ridg-It Roof Anchor cost?
$27.98 at WC Safety; the linked Amazon listing tracks live market pricing.
Can I reuse the Guardian 00510 Double D-Ring Ridg-It Roof Anchor after a fall?
No — any anchorage component that has arrested a fall comes out of service for evaluation per the manufacturer's instructions, and most temporary anchors are simply retired. Post-fall reuse is where anchor failures hide.
What connects to the Guardian 00510 Double D-Ring Ridg-It Roof Anchor — SRL or lanyard?
Either, as part of a complete personal fall arrest system with a full-body harness. An SRL minimizes free fall and clearance; a shock-absorbing lanyard costs less. Our SRL guide and lanyard guide rank the options.
How many workers can tie off to one anchor point?
One worker per anchor unless the anchor and structure are engineered for more — OSHA's 5,000 lb requirement is per attached worker. Multi-worker anchorage is qualified-person territory, not a field improvisation.
What does OSHA require of a fall-protection anchor?
Capable of supporting 5,000 lb per attached worker, or designed and used under a qualified person's supervision at a 2:1 safety factor, independent of any platform anchorage. Our anchor-requirements reference walks the full rule.
How do I inspect the Guardian 00510 Double D-Ring Ridg-It Roof Anchor before use?
Check structural deformation, cracks, corrosion, webbing or cable damage where applicable, legible markings, and the integrity of the substrate it's attached to. Anchors are inspected before each use like every system component.
Where should I position a roof or beam anchor?
As close to directly above the work as practical — swing fall is the under-appreciated killer, and every foot of lateral offset adds pendulum energy to an arrest. Reposition the anchor rather than working far to the side of it.
Temporary or permanent anchor — how do I choose?
By access frequency: one job gets a temporary (often disposable) anchor; repeat access to the same location justifies a permanent engineered point. The break-even is faster than most buyers expect once labor to re-install is counted.
Is Guardian Fall Protection a good fall-protection brand?
Guardian is a Pure Safety Group brand focused entirely on fall protection; its Ridg-It roof anchors and cross-arm straps are among the most-installed temporary anchors in US residential and commercial roofing.
Do anchor points need to be engineered or certified?
Certified anchors (designed by a qualified person for the specific structure) are one OSHA path; the 5,000 lb non-certified path is the other. Residential temporary anchors typically ride the 5,000 lb path installed per the manufacturer's instructions — deviate from those instructions and the rating evaporates.
How much fall clearance do I need below the anchor?
Free fall plus deceleration plus worker height plus safety margin — the anchor's height above the work surface drives the whole calculation. Our fall-clearance reference includes the worked math for lanyard and SRL systems.
The Bottom Line
The Guardian 00510 Double D-Ring Ridg-It Roof Anchor does its job at its price: stainless steel; D-ring connection point at $27.98. Rated 4.6/5 on documented spec, configuration, and value for the intended buyer.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates fall-protection equipment for construction, industrial, and utility buyers.
How We Review
Reviews draw on the manufacturer's published listing data and OSHA 29 CFR 1926.502 / 1910.140 anchorage requirements. We do not run lab tests or invent specifications; where a listing states no rating, the review says so. Ratings reflect documented spec, configuration, and value.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. Fall protection is life-safety equipment: anchor selection and installation are governed by the manufacturer's instructions and your competent/qualified person. Report errors to safetynw2012@gmail.com.
Leave a comment