Ergodyne 7022 ProFlex Hi-Vis A4 Cut-Resistant Nitrile Gloves Review (2026)

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. We stock this product; commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The Ergodyne 7022 ProFlex Hi-Vis A4 Cut-Resistant Nitrile Gloves is a safety gloves from Ergodyne, stocked at $8.99. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

The Ergodyne ProFlex 7022 Hi-Vis Nitrile Cut-Resistant Gloves provide ANSI/ISEA 105-2016 Level A4 cut resistance with a hi-vis lime shell and nitrile palm coating — combining mid-to-high A4 cut protection with the high-visibility shell standard for construction equipment-active areas and the nitrile grip chemistry appropriate for the surface conditions of heavy construction and outdoor industrial operations. The 7022 A4 hi-vis positions at the A4 level within the hi-vis ProFlex cut-resistant lineup — providing the higher A4 cut documentation required when construction and outdoor workers handle structural components, metal framing, and fabricated materials that generate cut forces above the A3 level, while maintaining the lime hi-vis shell that construction PPE programs require for workers in areas where cranes, lifts, and mobile equipment operate in proximity to hand work. The nitrile palm coating provides the oil and chemical resistance and surface friction characteristics needed for construction environments — resisting the lubricants, paints, solvents, and wet materials present on construction sites while providing grip on smooth steel and construction material surfaces. The hi-vis shell directly supports OSHA and site PPE program requirements for high-visibility marking in equipment-active areas, making the 7022 A4 the appropriate specification when the cut hazard assessment for a specific task requires A4 documentation and the site safety program requires hi-vis gloves for the work area. Workers who previously used A3 hi-vis gloves and have encountered materials that test at A4-level cut force can specify the 7022 A4 to maintain their hi-vis program while meeting the elevated cut documentation requirement.

Construction and heavy industry programs that require hi-vis gloves in equipment-active areas face a dual specification requirement — cut protection matched to the actual material hazard level alongside the hi-vis shell required by site safety rules. When the material cut hazard assessment places the exposure at A4 — from structural steel with precision-cut edges, medium-to-heavy gauge metal framing, fabricated anchor hardware, and precast concrete elements with embedded steel — workers need A4 cut documentation in a hi-vis format that satisfies both the hand protection standard and the site PPE requirement simultaneously. The 7022 A4 fulfills this combined specification for construction workers handling A4-cut materials in equipment-active areas where cranes, excavators, forklifts, and other mobile equipment operate in proximity to hand labor. Hi-vis gloves in these areas make workers' hands visible to equipment operators during load lifting, material positioning, and machine-assisted operations where hand signals and hand position must be clear to prevent pinch-point and contact incidents. The nitrile palm coating provides a general-purpose grip and protection chemistry suited to the range of construction surface conditions — wet structural steel, painted metal framing, concrete-form materials, and construction tools — without the specialization of foam nitrile (best for wet surfaces) or heavy-duty nitrile (best for oily metalworking). For the typical surface range of structural construction work, standard nitrile provides the appropriate balance of grip, protection, and durability that the applications require.

A4 cut documentation in hi-vis format addresses the simultaneous PPE requirements of construction equipment-active areas where both cut protection level and visibility marking are program requirements. Structural steel workers, ironworkers, and construction workers at sites with documented A4 cut hazard from specific materials receive the cut certification their hazard assessment requires without having to choose between cut level and hi-vis visibility.

Where It Earns Its Slot

Where it earns its slot: The Ergodyne ProFlex 7022 Hi-Vis Nitrile Cut-Resistant Gloves provide ANSI/ISEA 105-2016 Level A4 cut resistance with a hi-vis lime shell and nitrile palm coating — combining mid-to-high A4 cut protection with the high-v… The product page carries the full documented configuration; this review deliberately restates rather than embellishes it — claims beyond the listing don't appear here.

Honest Limits

Its honest limits: like every hand protection product, it protects within its stated ratings and use lane only — the family FAQ below draws those boundaries, and the guides linked underneath rank it against its true alternatives. Where the listing is silent on a spec, so are we; verify markings and instructions on arrival.

Pros and Cons

Alternatives in the Same Lane

• SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

Frequently Asked Questions

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The Ergodyne 7022 ProFlex Hi-Vis A4 Cut-Resistant Nitrile Gloves does the job its listing describes — the guides above tell you whether it's the right pick against the field.