Ergodyne 7001 ProFlex A2 Cut PU Palm Touchscreen Gloves Review (2026)

Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. We stock this product; commissions do not influence our review.

Reviewed by Steven Eaton, WC Safety Editorial

The Ergodyne 7001 ProFlex A2 Cut PU Palm Touchscreen Gloves is a safety gloves from Ergodyne, stocked at $5.93. This review restates what the product page documents, places it in its hand protection lane, and points to the ranked guides for the head-to-head field.

What the Product Page Documents

The Ergodyne ProFlex 7001 PU Palm Cut-Resistant Gloves provide ANSI/ISEA 105-2016 Level A2 cut resistance with a smooth polyurethane palm coating and touchscreen-compatible fingertips — delivering light-to-mid cut protection for precision assembly, electronics work, quality control inspection, and manufacturing operations where both certified hand cut protection and fingertip dexterity for touchscreen device and interface use are simultaneous program requirements. Smooth PU palm coating is the finishing-sensitive alternative to coarser grip formulations — where sandy nitrile maximizes mechanical friction on dry surfaces and foam nitrile provides wet-condition compliance, smooth PU provides the softest contact surface and highest tactile sensitivity for workers who must feel small parts, read surface features, and orient precision components by touch alongside cut protection from the work materials. The touchscreen-compatible fingertips extend the 7001's functionality to the manufacturing facility floor environments where barcode scanners, tablets, HMI touchscreens, and mobile device interfaces are part of the production workflow — workers can interact with touch interfaces without removing gloves, maintaining continuous hand protection through data entry, inventory scanning, and production system interaction that are integrated into modern manufacturing operations. Level A2 cut resistance provides the certified light cut protection appropriate for precision work environments — above the uncertified or A1 general work level, appropriate for the range of precision components that generate light cut force from machined sharp edges, thin gauge stamped parts, and precision assembly materials that don't require the higher-level engineering of A4 or above. Programs that integrate cut documentation with precision work requirements — electronics manufacturing, precision metal assembly, device production — specify the 7001 PU for the combination of A2 cut certification, smooth PU tactile performance, and touchscreen functionality that these environments require from a single glove specification.

Palm coating selection in cut-resistant work gloves is determined by the surface characteristics of the task — the texture and chemistry of parts contacted, the ambient surface conditions, and the tactile feedback requirements of the specific work. Sandy nitrile maximizes dry-surface friction for gripping smooth parts and tools where maximum mechanical traction is the priority. Foam nitrile provides wet-surface compliance for outdoor construction and moist material handling. Smooth PU coating occupies a different specification tier: it provides the softest, thinnest coating surface with the highest level of tactile transmission — allowing fine finger sensing of surface features, edges, fits, and orientations that heavier coatings mask. Precision assembly operations — placing electronic components in PCB fixtures, orienting small mechanical parts in jigs, verifying fit of precision-machined interfaces — benefit from the tactile sensitivity that smooth PU provides because the worker's ability to feel what they are doing directly affects assembly quality, error rates, and throughput. The polyurethane chemistry provides resistance to light oils and chemicals, appropriate for precision manufacturing environments that are generally clean relative to heavy industrial settings. A2 cut certification adds the documented light cut protection from precision components' machined edges, stamped features, and sharp points that can occur even in clean, precision-oriented manufacturing environments — providing certification compliance alongside the grip and tactile characteristics that precision work requires.

Smooth PU palm provides precision tactile feedback for assembly, inspection, and fine-motor manufacturing tasks where coarser coating materials reduce part-handling accuracy and inspection sensitivity. Electronics assemblers, precision parts handlers, and quality control inspectors who need to feel surface features and orientation maintain full tactile sensitivity through the 7001 PU's smooth coating — getting A2 cut certification without the tactile penalty of sandy or foam nitrile.

Where It Earns Its Slot

Where it earns its slot: The Ergodyne ProFlex 7001 PU Palm Cut-Resistant Gloves provide ANSI/ISEA 105-2016 Level A2 cut resistance with a smooth polyurethane palm coating and touchscreen-compatible fingertips — delivering light-to-mid cut protec… The product page carries the full documented configuration; this review deliberately restates rather than embellishes it — claims beyond the listing don't appear here.

Honest Limits

Its honest limits: like every hand protection product, it protects within its stated ratings and use lane only — the family FAQ below draws those boundaries, and the guides linked underneath rank it against its true alternatives. Where the listing is silent on a spec, so are we; verify markings and instructions on arrival.

Pros and Cons

Alternatives in the Same Lane

• SAS Safety Thickster Powder-Free Latex Gloves — 14 Mil
• MCR Safety PD6901 Predator Impact Gloves
• MCR Safety PD4900 Predator Impact Gloves
• MCR Safety PD43612 Predator Impact Gloves, Goatskin A9 Cut (
• MCR Safety PD4906 Predator Impact Gloves, Hi-Vis Reflective
• MCR Safety PD3430 Predator Impact Gloves, Sasquatch Leather
• MCR Safety FF2930 ForceFlex Impact Gloves, D3O Mechanics (Sm
• MCR Safety PD4971 Predator Impact Gloves
• MCR Safety PD6952 Predator Impact Gloves, A7 Cut, Level 2 Im

Hand Protection Guides

• Cut-Resistant Gloves Complete Guide
• Best Cut-Resistant Gloves
• Best Impact-Resistant Gloves
• Nitrile Gloves Complete Guide
• Best Mechanics Gloves

Browse by Category

• Cut-Resistant Gloves
• Impact-Resistant Gloves
• Nitrile Gloves
• Leather Work Gloves
• Chemical-Resistant Gloves
• Mechanics Gloves

Frequently Asked Questions

The Bottom Line

Rated 4.5/5 on documented spec, configuration, and value. The Ergodyne 7001 ProFlex A2 Cut PU Palm Touchscreen Gloves does the job its listing describes — the guides above tell you whether it's the right pick against the field.