How To Guide

A few anchor holes feel harmless, but hammer-drilling concrete makes respirable silica, 100 dB of noise, and real hand-arm vibration. This guide covers dust capture at the hole per OSHA's Table 1, what to check for inside the slab before drilling, bit-bind and technique fundamentals, and the compact PPE kit the job earns.

A bag of concrete mix carries silica dust going in and a pH 12-13 caustic paste coming out, and each hazard needs its own defense. This guide covers water-first low-dust mixing, the glove and boot choices that stop cement burns, splash protection, first aid for skin contact, and cleanup that does not re-launch the dust.

Porcelain and ceramic tile are full of crystalline silica, and the cutting method decides how much of it you breathe. This guide ranks snap cutters, wet saws, and dry grinders by dust, walks through wet-saw setup and technique, covers the PPE for the cuts that must be dry, and finishes with shard handling and cleanup rules.

Every concrete cut releases respirable crystalline silica, and OSHA's 1926.1153 rule puts wet cutting and vacuum capture ahead of any respirator. This guide covers the whole workflow: saw and blade setup, a head-to-toe PPE checklist, safe pass-by-pass cutting technique, slurry cleanup, and the cuts you should leave to a pro.