Skip to content
Industrial Safety Equipment & PPE — ANSI/OSHA Compliant
Industrial Safety Equipment & PPE — ANSI/OSHA Compliant
Home Safety Goggles Pyramex SD1010ST I-Force Sporty Dual-Pane Safet...

Pyramex SD1010ST I-Force Sporty Dual-Pane Safety Goggles

Pyramex Safety SKU: SB7010SDT Safety Goggles GTIN: 0814992000296
$20.09
Final price set by Amazon · may vary

EDITORIAL REVIEW: 4.4/5 — WC Safety Review of the Pyramex SD1010ST, judged on listing specs and category fit. Editorial assessment by Steven Eaton, WC Safety editor, based on published Pyramex specifications and cat...

Check Price on Amazon

🔒 Amazon Associate · You pay the same price · We earn a small commission

Zero Sponsored ListingsNo paid placements. Every recommendation is based on compliance, build quality, and field performance.
Curated SelectionExpert-chosen safety gear
Independently ReviewedUnbiased assessments — no manufacturer input
Built for Industrial BuyersSourced and reviewed for safety managers, procurement teams, and field supervisors.
ANSI Z87.1 eye protection I-Force Sporty Dual Pane Pyramex safety goggles
EDITORIAL REVIEW: 4.4/5 — WC Safety Review of the Pyramex SD1010ST, judged on listing specs and category fit.
Editorial assessment by Steven Eaton, WC Safety editor, based on published Pyramex specifications and category fit. We did not laboratory-test this product.

The Pyramex SD1010ST I-Force is the fog-fighting goggle of this range — a sporty low-profile frame around a dual-pane lens, the two-layer construction goggles use when a single coated lens is not enough.

CHECK PRICE ON AMAZON → SHOP SAFETY GOGGLES →

As an Amazon Associate, WC Safety earns from qualifying purchases.

Why the Pyramex SD1010ST runs a dual-pane lens

Sealed goggles fog because a closed chamber traps humid air, and coatings alone lose that fight in sweat-heavy work. The I-Force answer is architectural: the SD1010ST's dual-pane lens separates the cold outer world from the warm inner air with an insulating layer, attacking fog at its cause. As safety goggles go, this is the dual-pane anti-fog pick, and the best safety glasses guide and the anti-fog guide put it in context. It fights fog with structure, not just coating.

Safety first: impact protection and splash protection are different ratings — for a chemical splash hazard you need a sealed, indirect-vent goggle carrying the D3 splash marking, and neither open glasses nor a goggle of undocumented vent type should be assumed splash-rated. This listing does not document every marking, so confirm the Z87.1 impact marking, the vent type, and any D3 designation on the listing before assigning it to a rated hazard, and choose eyewear by the hazard assessment — not by looks.

What the Pyramex SD1010ST listing documents

From the live record: an I-Force sporty goggle profile; a dual-pane lens construction; and SKU SB7010SDT. These are dual-pane safety goggles and I-Force goggles credentials as a anti-fog goggles. This record is thin on documented specifications, so treat the listing as the source of truth: confirm the Z87.1 marking, vent type, lens coating and sizing there before assigning it to rated work, and never assume a marking the listing does not show — an undocumented spec is an unowned risk.

How the Pyramex SD1010ST compares

Eye protection is a range, not a single answer, so weigh this one against the neighbors before standardizing: the Pyramex Venture II, the Uvex Genesis, the KleenGuard Nemesis V30, the NoCry OTG goggles, the Sellstrom Odyssey II goggles. Matching seal, coverage, fit-over needs and coatings to the hazard beats picking by style, and the construction eyewear guide and the mechanics eyewear guide walk through that decision by trade.

Building out eye protection

Eyewear works as a program: open glasses for general impact, sealed goggles where debris or splash demand a seal, tints matched to light, and anti-fog matched to the environment — and because eye injuries arrive in a blink, the right pair has to already be on the face, which makes availability, comfort and fit every bit as protective as the rating stamped on the lens. Browse the safety glasses, eye protection, anti-fog safety glasses, clear-lens safety glasses, foam-lined safety glasses collections; and read the lens tint guide and the laboratory eyewear guide to map coverage by task.

Where it fits and crew orders

The SD1010ST suits sweat-heavy sealed-goggle work where fogging kills single-lens goggles — compare it with the Uvex Stealth OTG goggles, browse the wider indoor-outdoor safety glasses and head & eye protection ranges, and confirm the vent type before assigning chemical tasks. For crew orders, quantity purchasing runs through a free Amazon Business account — volume pricing, PO numbers at checkout, and tax-exempt eligibility for qualifying organizations, with the walkthrough linked in our footer.

Brand / Vendor
Pyramex Safety
Model / SKU
SB7010SDT
Product Type
Safety Goggles
Price
$20.09 (Amazon)
Availability
Check current availability on Amazon
🏷️
No Paid Placements
Every product earns its place based on safety credentials and field performance, not advertising spend.
🏭
Industrial Grade Only
Products sourced for professional use in manufacturing, construction, and industrial environments.
🔬
Compliance Verified
Every product listed on WC Safety is reviewed for standards compliance and safety credentials before publication.
🏭
Sourced for Professionals
Gear selected for safety managers, procurement teams, and field supervisors — not casual consumers.
Verified Buyer Reviews

Customer Reviews

Share Your Experience

Write a Review

Select a rating

Thank you for your review!

Your submission has been received and will be published after verification.

Pyramex SD1010ST I-Force Sporty Dual-Pane Safety Goggles