MAGID Class 0 Insulating Gloves Review (2026)
Affiliate disclosure: As an Amazon Associate, WC Safety earns from qualifying purchases at no extra cost to you. We stock this product; commissions do not influence our review.
★★★★½ 4.6/5
Reviewed by Steven Eaton, WC Safety Editorial
| Brand | MAGID |
|---|---|
| Category | Electrical Insulating Glove System |
| Construction (per listing) | Rubber insulating gloves; ASTM D120 Class 0 marking per listing |
| Typical price | $71.59 |
The MAGID Class 0 Insulating Gloves is a electrical insulating glove system from MAGID, stocked at $71.59 — built as the ASTM D120 Class 0 dielectric barrier. It's the pick for electricians and maintenance techs working at or near energized LV circuits under an electrical safety program. This review covers what the listing documents, where it beats its closest rival, and who should buy something else.
Why the MAGID Class 0 Insulating Gloves Stands Out
Class 0 insulating gloves are the electrician's voltage barrier — rated per the ASTM D120 class marking for LV work up to 1,000 V AC. They're also a calibrated instrument, not a glove: air-tested before every use, electrically retested on OSHA 1910.137's six-month clock, and never worn without leather protectors over them.
Specification and Configuration
What the listing commits to: rubber insulating gloves; astm d120 class 0 marking per listing. Claims beyond that — lab numbers, endurance figures, certifications the listing doesn't state — don't appear in this review, because we don't invent them. Size and color options run on the linked Amazon listing rather than as separate stocked variants.
Specialty PPE earns its place by matching a specific hazard mechanism — arc rays need shielding, voltage needs a tested dielectric system, saw chains need sacrificial fibers, gas sensors need traceable calibration. The MAGID Class 0 Insulating Gloves is the electrical insulating glove system answer in that set; browse the related collections linked below for the neighboring gear.
Where It Falls Short
Its limits, honestly: Wearing them bare — a pinhole from a burr is an invisible failure; the leather protector layer is mandatory, not optional.
Pros and Cons
Pros
- Rubber insulating gloves
- $71.59 — positioned honestly against its ladder
- From MAGID — the reference brand in jobsite cooling
- Listing states its construction claims plainly
Cons
- Single-listing size/color selection happens on Amazon, not as stocked variants
- Wearing them bare
Who Should Buy It
Order the MAGID Class 0 Insulating Gloves if you are electricians and maintenance techs working at or near energized LV circuits under an electrical safety program.
Who Should Skip It
Skip it for wearing them bare — a pinhole from a burr is an invisible failure; the leather protector layer is mandatory, not optional.
How It Compares
Not a comparison but a system: the rubber is the barrier, the leather is the armor that keeps the barrier intact. Sold separately, worn together, always. The round-8 collections carries the complete ladder so you can compare every tier. Head-to-head rival: MAGID Leather Protectors.
Other Options in the Lineup
- MAGID Leather Protector Gloves
- VEVOR Welding Screen 6x6
- GAOMON Welding Screen 6x6
- YESWELDER Welding Blanket 2-Pack
- FORESTER Chainsaw Chaps
- Husqvarna Technical Chainsaw Chaps
- Oregon Chainsaw Chaps
- Husqvarna Chainsaw PPE Kit
- BW CG-Q34-4 Calibration Gas
Specialty PPE Guides
- Best Welding Gloves
- Welding Helmets Complete Guide
- Best 4 Gas Monitor
- Best Leather Work Gloves
- Construction Site PPE Guide
Browse by Category
- Welding Blankets & Curtains
- Insulated Electrical Gloves
- Chainsaw Safety Gear
- Gas Detector Calibration Accessories
- Welding Gloves
- Lockout/Tagout
Frequently Asked Questions
What is the MAGID Class 0 Insulating Gloves made of?
Per the listing: rubber insulating gloves; astm d120 class 0 marking per listing. That's the documented construction — anything beyond it belongs to the manufacturer's spec sheet, not this review.
How much does the MAGID Class 0 Insulating Gloves cost?
$71.59 at the linked Amazon listing. Prices track the live listing, and size or color selections there can shift the number.
MAGID Class 0 Insulating Gloves vs MAGID Leather Protectors — which should I buy?
Not a comparison but a system: the rubber is the barrier, the leather is the armor that keeps the barrier intact. Sold separately, worn together, always.
Who is the MAGID Class 0 Insulating Gloves best for?
Electricians and maintenance techs working at or near energized LV circuits under an electrical safety program.
When should I skip the MAGID Class 0 Insulating Gloves?
Wearing them bare — a pinhole from a burr is an invisible failure; the leather protector layer is mandatory, not optional.
What sizes does the MAGID Class 0 Insulating Gloves come in?
The size run (and color options where offered) lives on the linked Amazon listing — we deliberately don't restate it, because listings update. Check the size chart there before ordering.
Is MAGID a good brand?
MAGID is a century-old US safety supplier whose glove catalog spans every protection class — including ASTM D120 rubber insulating gloves and their mandatory leather protectors. Industrial-distributor pedigree with published spec documentation.
What regulation covers equipment like the MAGID Class 0 Insulating Gloves?
OSHA 29 CFR 1910.137 governs insulating gloves: leather protectors over rubber, air tests before use, and electrical retests at maximum six-month in-service intervals.
How do I size or position the MAGID Class 0 Insulating Gloves correctly?
Size to your measured hand — tight stresses the rubber, loose costs dexterity near energized parts. Store cuff-up, unfolded, away from ozone sources.
What's the replacement trigger for the MAGID Class 0 Insulating Gloves?
Any failed air test, visible damage, or a missed retest date — an out-of-test insulating glove is out of service, full stop.
What pairs with the MAGID Class 0 Insulating Gloves to complete the setup?
Leather protectors (mandatory), insulated tools, and the lockout/tagout discipline that makes energized work the exception rather than the habit.
Is the MAGID Class 0 Insulating Gloves the right tier, or should I spend more?
Class 0 covers LV industrial work; utility-voltage classes (1-4) and ATPV-rated arc-flash kits are different program tiers — buy them when the hazard assessment says so, not speculatively.
Who should NOT rely on the MAGID Class 0 Insulating Gloves?
Anyone without the program around the glove — untested, unprotected, or expired rubber is costume, not PPE.
How does the MAGID Class 0 Insulating Gloves fit a small operation's budget?
Each of these categories prices its floor under $200 — and each guards against an incident class (flash burns, shock, saw lacerations, undetected gas) whose single cheapest occurrence costs more than the whole category. Buy the floor, then upgrade against hours.
Where does the MAGID Class 0 Insulating Gloves fit in the wider catalog?
It extends an existing silo — welding, electrical/lockout, outdoor trades, or gas detection — and the collections linked below carry the neighboring gear those silos already stock.
The Bottom Line
The MAGID Class 0 Insulating Gloves does its job at its price: the ASTM D120 Class 0 dielectric barrier at $71.59. Rated 4.6/5 on documented spec, configuration, and value for the intended buyer.
About the Author
Steven Eaton is the founder of WC Safety and an industrial PPE specialist who sources and evaluates specialty jobsite protection for industrial and construction buyers.
How We Review
Reviews draw on the manufacturer's published listing data and the applicable OSHA and ANSI consensus standards. We do not run lab tests or invent specifications; where a listing states no rating, the review says so. Ratings reflect documented spec, configuration, and value.
Affiliate Disclosure
WC Safety is an Amazon Associate and earns commissions on qualifying purchases through links on this page. Affiliate relationships do not influence our ratings.
Editorial Standards
Claims are drawn from listing data and published standards. WC Safety does not invent specifications or test results. Report errors to safetynw2012@gmail.com.
Leave a comment