Honeywell North 7600 Series Full Face Respirator 760008AM/L 760008AS

Honeywell North 760008A Full Face Respirator — North 7600 Series, NIOSH TC-14C, APF 50, Medium/Large Size

Short answer: The North 760008A is a NIOSH TC-14C approved full-face respirator carrying APF 50 under OSHA 1910.134 Appendix A — five times the protection of a half-mask. It uses the North bayonet cartridge system, compatible with the complete North cartridge library. The polycarbonate lens provides eye and face protection against splash and mist, eliminating separate chemical goggles in most chemical exposure environments. The 7600 series uses premium silicone construction with 5-strap harness for full-shift comfort. Confirm medium/large size with OSHA-required fit testing before operational deployment.

Honeywell North 760008A Full Face Respirator — Medium/Large | North 7600 Series

Reviewed by the WC Safety Editorial Team — PPE specialists with hands-on experience across industrial, construction, chemical, and welding environments. Last updated: May 2026.

The Honeywell North 760008A is the medium/large-size full-face respirator in the North North 7600 Series. It carries NIOSH 42 CFR 84 TC-14C approval and delivers an Assigned Protection Factor of 50 per OSHA 29 CFR 1910.134 Appendix A when properly fit-tested — the highest APF available in a tight-fitting air-purifying respirator. The 760008A uses the North bayonet cartridge connection, providing access to the complete North cartridge library — P100 particulate, organic vapor, acid gas, combination cartridges, and specialty mercury vapor protection. The full-face lens provides respiratory and eye protection in a single unit — critical in corrosive chemical environments, acid gas atmospheres, and any application requiring both high-level respiratory protection and face protection simultaneously. The 7600 series features soft non-allergenic silicone face seal and 5-strap adjustable harness engineered for full-shift industrial wear. OSHA 1910.134(f)(2) requires fit testing before operational deployment.

Key Features — Honeywell North 760008A

• Premium silicone face seal: The 7600 series uses soft, non-allergenic silicone that conforms to facial contours under minimal pressure. Silicone resists degradation from oils, solvents, and industrial chemicals — maintaining face seal integrity and flexibility across the service life of the facepiece. Appropriate for workers with latex sensitivity
• Wide-view hard-coated polycarbonate lens: The panoramic polycarbonate lens provides broad field of vision for situational awareness in hazardous environments. Hard coating reduces surface scratching that can compromise lens clarity over time. The lens provides integrated eye protection against splash and mist, eliminating separate chemical splash goggles in most industrial environments
• 5-strap adjustable head harness: The 5-strap harness distributes facepiece weight and seal pressure evenly across the head, reducing facial fatigue during extended wear and maintaining consistent seal geometry during physical work and movement
• NIOSH TC-14C, APF 50: The 760008A meets NIOSH approval requirements for full-face tight-fitting APRs under 42 CFR Part 84. APF 50 — five times a half-mask — is appropriate for environments up to 50× OEL. Proper OSHA-required fit testing is required to claim the APF 50
• Complete North cartridge library access: The North bayonet connection provides access to every North bayonet cartridge — from standalone P100 to the 75852P100L mercury vapor combination cartridge. Cartridge platforms are brand-specific: North bayonet cartridges do not fit 3M, MSA, or Moldex respirators
• Integrated eye and face protection: The polycarbonate lens covers the face and eyes — eliminating separate chemical goggles in most industrial applications. In environments with simultaneous respiratory and eye hazards, the 760008A reduces PPE ensemble complexity and eliminates seal gaps that can occur between separate goggles and a half-mask

Applications — When to Use the North 760008A

• High-concentration chemical environments requiring APF 50: The primary use case for full-face over half-mask. When airborne concentrations exceed 10× OEL (the APF 10 ceiling of a half-mask) but are ≤ 50× OEL, a full-face APR is required. Common situations: confined-space chemical entry, high-concentration solvent operations, process upset response, and industrial cleaning with concentrated chemicals
• Corrosive gas and vapor environments with eye hazard: HF, HCl, Cl₂, SO₂, ammonia, and bromine are both respiratory hazards and eye/mucous membrane hazards. The 760008A's polycarbonate lens eliminates the need for separate chemical splash goggles in most corrosive atmospheres — a meaningful operational advantage in confined access areas and emergency response
• Asbestos abatement — Class I operations: OSHA 1926.1101 requires minimum APF 50 for Class I asbestos work (removal of thermal system insulation and surfacing ACM) when negative-pressure containment is not maintained. The 760008A with 7580P100 P100 satisfies the APF 50 requirement. Confirm specific work classification requirements with a certified industrial hygienist before deployment
• Lead abatement at elevated concentrations: OSHA 1926.62 requires APF 50 full-face protection when airborne lead exceeds 500 µg/m³ (10× PEL of 50 µg/m³). The 760008A with 7580P100 P100 provides the required full-face APF 50 protection level for lead abatement at these concentrations
• Silica-generating operations at higher concentrations: When respirable crystalline silica concentrations exceed 10× the PEL (0.5 mg/m³ for quartz), a full-face APR is required. The 760008A with 7580P100 P100 provides APF 50 particulate protection for concrete demolition, tunneling, and silica-heavy construction
• Spray painting and isocyanate environments: Two-part urethane and isocyanate-based coatings involve respiratory sensitizers that justify APF 50 full-face protection in many industrial spray environments. Select 7583P100L OV/AG/P100 or 7581P100L OV/P100 based on the specific paint chemistry documented in the SDS
• Ammonia environments requiring APF 50: Anhydrous ammonia in agriculture, refrigeration, and chemical manufacturing can reach concentrations where APF 10 half-masks are insufficient. The 760008A with N75004L NH₃ cartridge provides APF 50 ammonia protection. Above 50× OSHA PEL (1,750 ppm), a SCBA is required
• Oil refinery and sour gas maintenance: H₂S in sour crude environments, combined OV/AG exposures in process facilities. The 760008A with 7583P100L OV/AG/P100 addresses mixed gas hazard profiles at APF 50

Compatible Cartridges — North Bayonet System

The North 760008A accepts all North bayonet cartridges. Select based on the documented hazard profile from your site industrial hygiene assessment:

North bayonet cartridges are not compatible with 3M, MSA, Moldex, or other brands. Full cartridge lineup: North Respirator Cartridges & Filters →

Job-site cartridge selection: North Respirator Cartridge Guide 2026 →

North 7600 Series Full Face — All Sizes

North 760008A vs. Alternatives

Cartridge platforms are brand-specific — North and 3M bayonet systems are not interchangeable. All full-face APRs listed carry APF 50 when properly fit-tested per OSHA 1910.134 Appendix A.

OSHA Compliance & Fit Testing

All Honeywell North full-face respirators carry NIOSH 42 CFR 84 TC-14C approval — the NIOSH classification for tight-fitting full-face air-purifying respirators. Under OSHA 29 CFR 1910.134 Appendix A, a properly fit-tested full-face APR carries an Assigned Protection Factor of 50 — five times the APF 10 of a half-mask.

• Written respiratory protection program: Required under OSHA 1910.134(c) before any operational use — must include hazard assessment, written program, medical evaluation, fit testing, and cartridge change-out schedules. Full-face respirators place higher respiratory demands than half-masks and require specific documentation
• Medical evaluation first: OSHA 1910.134(e) requires a PLHCP-reviewed medical questionnaire before fit testing or operational use — full-face respirators require medical clearance before workers may be fit tested
• Annual fit testing: OSHA 1910.134(f)(2) mandates annual qualitative (QLFT) or quantitative (QNFT) fit testing. Qualitative fit testing is valid only for respirators used at ≤ APF 10; above that, quantitative fit testing is required for strict compliance. Confirm with your PLHCP or industrial hygienist for the specific testing protocol required for APF 50 programs
• User seal check every use: Positive and negative pressure checks per OSHA Appendix B-1 before each entry into the work area — required for all tight-fitting facepieces
• Cartridge change-out schedule: OSHA 1910.134(d)(3)(iii) requires a written schedule based on objective data — never rely on odor breakthrough as the change indicator
• APF 50 ceiling: Full-face APRs are appropriate when airborne concentrations are ≤ 50× OEL. If your hazard assessment documents concentrations above 50× OEL, a PAPR (APF 1000 with loose-fitting hood) or SCBA is required. Full-face APRs may not be used in IDLH atmospheres except under specific conditions defined in OSHA 1910.134(d)(2)
• Eye protection integration: The polycarbonate lens provides incidental splash and mist protection — a significant operational advantage in corrosive chemical environments. Lens inspection and replacement schedules should be documented in the written program

Who Needs the Medium/Large Size?

The Medium/Large size covers the majority of adult workers in the North North 7600 Series. The North 7600 Series full-face comes in two sizes — Small and Medium/Large — and M/L is the recommended starting point if you have not been fit tested. If OSHA-required fit testing confirms an inadequate seal in M/L, move to the Small (760008AS). Facial dimensions — not body size or height — determine the correct respirator fit; do not select size based on general stature or weight.

Important: Do not select size based on general body size or height. Facial geometry determines respirator fit. The 760008A and 760008AS are identical in every respect — NIOSH approval, APF, cartridge compatibility — except facepiece geometry. OSHA 1910.134(f)(2) requires annual fit testing regardless of size chosen.

Frequently Asked Questions — Honeywell North 760008A

Why choose a full-face respirator over a half-mask?

The primary reasons are protection level and eye protection integration. A properly fit-tested full-face APR carries APF 50 — five times the APF 10 of a half-mask. If your hazard assessment documents concentrations between 10× and 50× OEL, a full-face is required by OSHA. Additionally, the polycarbonate lens protects eyes from splash and mist in corrosive chemical environments, eliminating the need for separate chemical goggles in many situations. For environments ≤ 10× OEL where eye protection is not required, a North half-mask (7700 or 5500 series →) provides the same North bayonet cartridge access at lower cost.

Can I use 3M cartridges on the North 760008A?

No. The North 760008A uses the North bayonet twist-lock connection, which is incompatible with 3M, MSA, or Moldex cartridges. All cartridges must be North-branded bayonet cartridges. See: North Respirator Cartridges & Filters →.

What NIOSH approval does the North 760008A carry?

The 760008A is NIOSH approved under 42 CFR Part 84 as a TC-14C full-face tight-fitting air-purifying respirator. Under OSHA 29 CFR 1910.134 Appendix A, a properly fit-tested 760008A carries an APF of 50 — appropriate when airborne concentrations are ≤ 50× the OEL.

What size do I need — Small or Medium/Large?

Facial geometry — not general body size — determines correct fit. Start with the M/L (this product) if you have not been fit tested — it covers the majority of adult workers. If OSHA-required fit testing confirms an inadequate seal, move to the Small (760008AS). OSHA 1910.134(f)(2) requires annual fit testing regardless of size selected.

What cartridges work with the North 760008A?

The 760008A accepts all North bayonet cartridges: 7580P100 (P100), 7581P100L (OV/P100), 7582P100L (AG/P100), 7583P100L (OV/AG/P100), 75852P100L (mercury vapor + P100), gas-only cartridges N75001L (OV), N75002L (OV/AG), and N75004L (NH₃). See: North Cartridge Guide 2026 →

Can the North 760008A be used for asbestos abatement?

Yes — the 760008A with 7580P100 P100 provides NIOSH TC-14C APF 50 protection applicable to Class I and II asbestos abatement under OSHA 1926.1101. Class I work requires a minimum APF 50 when airborne concentrations are above the TWA PEL. Confirm specific work classification requirements with a certified industrial hygienist before deployment — Class I asbestos operations may require SCBA or PAPR under certain conditions.

Does the lens provide chemical splash protection?

The hard-coated polycarbonate lens provides protection against liquid splash, mist, and airborne particles — in most chemical environments, it eliminates the need for separate chemical splash goggles. Polycarbonate can be degraded by prolonged exposure to certain solvents (ketones, esters, aromatic hydrocarbons). In heavy solvent environments, inspect the lens regularly and replace if cloudiness, crazing, or surface degradation is noted. For direct immersion in concentrated acids, verify lens chemical compatibility with the product datasheet for your specific exposure.

How does the 760008A compare to the 54001?

Both carry NIOSH TC-14C approval and APF 50 — the compliance standing and protection level are identical. The 7600 series offers premium silicone construction, 5-strap harness, and enhanced comfort for extended wear; the 5400 provides the same cartridge access at lower facepiece cost. See: 54001.

How often do cartridges need to be replaced?

OSHA 1910.134(d)(3)(iii) requires a written change-out schedule established before use — not based on odor. For P100 filters, replace when breathing resistance increases noticeably or upon physical damage. For vapor and combination cartridges, use Honeywell's service life estimation tools based on contaminant, concentration, temperature, humidity, and shift length. End-of-shift replacement is the conservative standard in high-hazard environments. See: North Cartridge Guide 2026 →

How do I clean and maintain the North 760008A?

Remove cartridges before cleaning. Wash with mild soap and warm water; rinse thoroughly. Use an approved disinfectant and allow to air dry — do not use solvents or bleach on the silicone face seal or polycarbonate lens. Inspect the face seal, exhalation valve, head harness, and lens before each use. Replace the lens if it shows crazing, cloudiness, or surface degradation that impairs visibility or seal integrity. Write lens inspection and replacement into your respiratory protection program.