Ergodyne GloWear 8353 Hi-Vis Softshell Jacket — Type R Class 3, Fleece-Lined

CHECK PRICE ON AMAZON →SHOP HI-VIS JACKETS →

As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.

Ergodyne GloWear 8353 Hi-Vis Softshell Jacket Overview

Who This Jacket Is For

High-visibility apparel helps others see you, but it does not by itself keep you safe. The jacket's 2 d-rings are for accessories and ID badges only — they are not fall-arrest connection points, so never clip a lanyard or fall-arrest device to them; work at height still requires a proper personal fall arrest system with a rated full-body harness and anchor. Near traffic, hi-vis is the last layer of protection and works alongside traffic-control plans, barriers, and safe work practices, not instead of them. Keep the fluorescent color and 2-inch reflective stripes clean, uncovered, and intact, and retire the jacket once the color fades or the stripes crack, because that drops it below the Class 3 visibility it is certified to. This is a hi-vis softshell, not flame-resistant or arc-rated apparel. Learn the rules in what is ANSI 107 and when do you need hi-vis.

Pros & Cons

How It Compares

Specifications

Related Guides

best hi-vis jackets, hi-vis safety apparel complete guide, what is ANSI 107, when do you need hi-vis, best hi-vis rain gear.

Related Resources

hi-vis jackets high visibility hi-vis hoodies hi-vis rainwear hi-vis shirts

Frequently Asked Questions

What ANSI class is the GloWear 8353?

It is ANSI/ISEA 107 Type R, Class 3, and third-party certified. Type R is for roadway and temporary traffic-control work, and Class 3 is the highest visibility class, which requires sleeves and the most background and reflective material. Confirm the label matches your job's requirement.

Is the jacket waterproof?

No. It is water- and wind-resistant thanks to a PU-coated polyester shell, which sheds light rain and blocks wind, but it is not a waterproof rain jacket. For sustained rain, choose dedicated hi-vis rain gear.

Does the hood fit over a hard hat?

Yes. The removable hood is large enough to pull up over a hard hat, and it detaches when you do not need it. That makes the jacket practical on a jobsite where head protection is required.

Can I clip a lanyard to the d-rings?

No. The 2 d-rings are for accessories and ID badges, not for fall arrest. Never connect a lanyard or fall-arrest device to a jacket d-ring. Work at height requires a rated full-body harness and a proper anchor point.

How warm is it?

It has a soft polar fleece lining and a CLO rating of 0.42, rated for moderate work at about 30°F for up to five hours. Thumb loops and hook-and-loop cuffs help seal in heat. For colder conditions, layer or choose a heavier insulated hi-vis jacket.

How is it different from a Class 2 hi-vis vest?

A Class 3 jacket has sleeves and more reflective and background material than a Class 2 vest, so it gives higher visibility for higher-risk or low-light work. A Class 2 vest is lighter for lower-speed or daytime settings. Match the class to your hazard.

What pockets and features does it have?

It has 2 lower front pockets, 1 upper chest cell-phone pocket, 3 zippered interior pockets, and 2 d-rings, plus an elastic bungee waist and a long tail that resists riding up. The fit is athletic rather than boxy.

What color is it?

The hi-vis version is lime (yellow-green), which is the common high-visibility color. Confirm the exact color and that it meets your site or roadway color requirement before ordering.

Does hi-vis clothing make me safe near traffic?

No. Hi-vis makes you easier to see, but it does not stop a vehicle. It is the last layer of protection and works with traffic-control plans, barriers, and safe work practices, not instead of them.

How do I wash it without ruining the hi-vis?

Follow the care label. Hi-vis garments lose visibility performance over time and after repeated washing, so wash gently, keep the reflective stripes clean and uncovered, and retire the jacket when the fluorescent color fades or the stripes crack.

Is it flame resistant?

No. The GloWear 8353 is a high-visibility softshell, not flame-resistant or arc-rated apparel. For hot-work, electrical, or arc-flash hazards, use garments certified to the relevant FR or arc standard instead.

How do I know when to replace it?

Replace it when the fluorescent background fades, the reflective stripes crack, peel, or dull, or the garment is torn or heavily soiled, because any of these reduces visibility below the Class 3 requirement.