3M Protecta Comfort Construction Full Body Harness, Medium/Large (Fall Arrest Harness)
EDITORIAL REVIEW: 4.5/5 WC Safety Review — 3M Protecta Comfort Construction Full Body Harness, Medium/Large Editorial assessment by the WC Safety Editorial Team, based on published 3M specifications and category f...
Check Price on Amazon🔒 Amazon Associate · You pay the same price · We earn a small commission
Editorial assessment by the WC Safety Editorial Team, based on published 3M specifications and category fit. We did not laboratory-test this product.
CHECK PRICE ON AMAZON →SHOP FALL PROTECTION →
As an Amazon Associate, WC Safety earns from qualifying purchases. Full affiliate disclosure.
3M Protecta Comfort Construction Full Body Harness, Medium/Large (Fall Arrest Harness) Overview
The 3M Protecta Comfort Construction Full Body Harness (Medium/Large) is a construction-style fall arrest harness built for crews who need an OSHA-compliant connection point without a premium price. It sits in 3M's value-tier Protecta family, below the DBI-SALA ExoFit line, and brings padded comfort to daily wear on full body harnesses duty.
A full-body harness is the only body wear OSHA permits for fall arrest — body belts are prohibited for arresting a fall. This Protecta model provides the dorsal (back) D-ring that connects to a shock-absorbing lanyard or a self retracting lifeline, completing a personal fall arrest system anchored to a 5,000 lb anchorage per OSHA 1926.502.
The Medium/Large size band fits most mid-size workers; confirm your chest and waist measurements against 3M's sizing before ordering. As construction-style wear, it is designed for general elevated work on scaffolds, steel, and rooftops. Browse the full fall protection range to add the lanyard, SRL, and anchorage that complete your system.
As an Amazon Associate, WC Safety earns from qualifying purchases. Verify size, D-ring configuration, and capacity rating on the live Amazon listing before you buy.
What It Is Built For
| Use case | Fit | Buyer guidance |
|---|---|---|
| General construction fall arrest (scaffold, steel, rooftop) | Strong fit | Connect the dorsal D-ring to a shock-absorbing lanyard or SRL anchored to 5,000 lb per OSHA 1926.502. |
| All-day wear where comfort matters | Strong fit | Padded construction-style design reduces pressure points during extended elevated work. |
| Mid-size worker needing standard sizing | Good fit | Medium/Large band suits most average builds; check chest and waist against 3M's size chart first. |
| Arc flash or electrical work | Not suitable | This is a standard construction harness; choose a dedicated arc-flash-rated harness for energized work. |
| Work positioning or rebar climbing needing side D-rings | Verify before buying | Confirm whether this model carries side positioning D-rings on the live listing; do not assume. |
| Replacing a harness that arrested a fall | Required replacement | Any harness involved in a fall must be retired immediately — this is a compliant replacement choice. |
Fall protection is life-safety equipment. A personal fall arrest system must limit free fall and arrest forces under OSHA 1926.502 / 1910.140 and ANSI Z359: use a full-body harness (never a body belt for fall arrest) with a compatible shock-absorbing lanyard or self-retracting lifeline and an anchorage rated 5,000 lb per worker (or engineered to a 2:1 safety factor). Inspect every component before each use, immediately retire anything that has arrested a fall or shows damage, and work to a documented rescue plan. Browse fall protection and full-body harnesses.
Pros & Cons
- Construction-style full body harness built for OSHA 1926.502 / 1910.140 fall arrest
- Padded design adds comfort for all-day elevated work
- Dorsal (back) D-ring for clean connection to a lanyard or SRL
- Value-tier Protecta pricing versus premium DBI-SALA harnesses
- Backed by 3M, a trusted fall protection manufacturer
- Medium/Large sizing covers most mid-size workers
- Harness only — shock-absorbing lanyard or SRL and anchorage sold separately
- Single size band (M/L); confirm fit before ordering
- Capacity, D-ring count, and ANSI rating must be verified on the listing, not assumed
- Must be retired permanently after arresting any fall
How It Compares
All three are 3M full body harnesses for fall arrest. The Comfort Construction sits between the entry Protecta Comfort and the premium DBI-SALA ExoFit X200 construction model. Verify exact D-ring layout and capacity on each live listing before choosing.
| Model | Tier | Size shown | Best for |
|---|---|---|---|
| 3M Protecta Comfort Construction (this page) | Value, padded | Medium/Large | Everyday construction fall arrest with comfort |
| 3M Protecta 1161421 Comfort | Value, entry | Medium/Large | Budget full-body harness for general fall arrest |
| 3M DBI-SALA 1402106 ExoFit X200 Construction Positioning | Premium | Medium | Construction work needing positioning features |
Shop all full body harnesses or the wider fall protection category to compare siblings and pair the right lanyard or self retracting lifeline.
Specifications
| Brand | 3M |
| Product line | Protecta (Comfort Construction) |
| Type | Full body harness (personal fall arrest) |
| Style | Construction, padded |
| Size | Medium/Large |
| Primary connection | Dorsal (back) D-ring |
| Intended use | OSHA 1926.502 / 1910.140 fall arrest |
| Required companions | Shock-absorbing lanyard or SRL + 5,000 lb anchorage |
| ASIN | B0FSXLKC5D |
Related Resources
fall protection full body harnesses lanyards self retracting lifelines
Frequently Asked Questions
Is the 3M Protecta Comfort Construction harness OSHA compliant for fall arrest?
It is a full body harness, which is the only body wear OSHA 1926.502 and 1910.140 allow for arresting a fall (body belts are prohibited). To be compliant in use, connect its dorsal D-ring to a shock-absorbing lanyard or self retracting lifeline anchored to a 5,000 lb anchorage. Confirm the harness's specific ratings on the live listing.
What size does the Medium/Large fit?
The M/L band is designed for most mid-size workers. Sizing varies by build, so measure your chest and waist and check them against 3M's official size chart before ordering. If you are at the edge of the range, consider a different size in the full body harnesses collection.
Does this harness come with a lanyard or lifeline?
No. This is the harness only. A complete personal fall arrest system also needs a shock-absorbing lanyard or a self retracting lifeline plus a compliant 5,000 lb anchorage, all sold separately.
Where does the fall arrest connection attach on this harness?
It uses a dorsal (back) D-ring as the primary fall arrest attachment, which keeps you upright after arrest. Attach your lanyard or SRL there. Check the listing to confirm whether any additional D-rings are present before assuming a side or front attachment.
What weight capacity does this harness support?
We do not publish a capacity figure we cannot verify. Confirm the rated capacity range on the live Amazon listing or the 3M data sheet before use, and never load a harness beyond its stated rating including the worker plus tools and equipment.
Is this harness rated to ANSI Z359?
Treat the ANSI rating as something to verify, not assume. Many 3M Protecta harnesses meet ANSI Z359 and OSHA requirements, but you should confirm the exact standard on the product listing or 3M documentation before relying on it for compliance.
Can I use this harness for arc flash or electrical work?
No. This is a standard construction harness, not an arc-flash-rated model. For energized or electrical work, choose a harness specifically rated for arc flash, such as an MSA Workman Arc Flash harness in the full body harnesses collection.
How is this different from the 3M Protecta 1161421 Comfort harness?
Both are value-tier Protecta full body harnesses. The Comfort Construction model is geared toward construction-style daily wear with padding, while the 1161421 Comfort is the entry-level option. Compare them side by side in the full body harnesses collection and verify each one's D-ring layout on its listing.
Do I need to replace this harness after a fall?
Yes. OSHA and 3M require that any component of a personal fall arrest system that has arrested a fall be removed from service immediately and never reused. Buy a replacement harness right away if yours has taken a fall.
How often should I inspect this harness?
Inspect it before every use for cut or frayed webbing, damaged stitching, corroded or deformed D-rings, and faulty buckles. A competent person should also perform documented periodic inspections per your fall protection program. Remove it from service if anything fails inspection.
What lanyard or SRL should I pair with this harness?
Pair it with a shock-absorbing lanyard for shorter fixed-anchor work or a self retracting lifeline for greater mobility and shorter fall distances. Browse the lanyards and self retracting lifelines collections, and always confirm the connector and anchorage are rated for fall arrest.
What else do I need to build a complete fall arrest system?
Beyond the harness, you need a connecting device (shock-absorbing lanyard or SRL) and a 5,000 lb anchorage point, plus enough clearance below to arrest a fall safely. Shop the full fall protection category to assemble every part of the system before working at height.
Written by Steven Eaton, WC Safety Editorial. Specifications sourced from 3M published data. Compare the range in full-body harnesses.
WC Safety is an independent PPE retailer and Amazon Associate; no paid placement. Match the product to your specific hazard and follow your site PPE program.
Customer Reviews
Write a Review
Thank you for your review!
Your submission has been received and will be published after verification.